NW312.TXT Driver File Contents (C110w.zip)

   Server Driver for NetWare 3.12

   This document describes the procedure to install the NetWare v3.12
   server driver for 10/100Mbps Fast Ethernet Adapter.

   Location of Driver:     \NWSERVER\312\C110w.LAN

   Installation Procedure:
      Before you start with the installation process, make sure that
      the Novell NetWare v3.12 server is properly installed.
      Similarly, your adapter should also be properly installed in your

        1. Make a sub-directory NLMS.OLD under <SRVPATH> directory which
           includes SERVER.EXE.

           Ex. <SRVPATH> = SRV312.
               >MD \SRV312\NLMS.OLD


        3. Insert driver diskette into floppy disk drive.

        4. Copy all provided NLM and LAN files into your dos directory
           which includes SERVER.EXE, and rename NBI31X.NLM and MSM31X.NLM

           Ex. >COPY A:\NWSERVER\312\NBI31X.NLM C:\SRV312\NBI.NLM
               >COPY A:\NWSERVER\312\MSM31X.NLM C:\SRV312\MSM.NLM
               >COPY A:\NWSERVER\312\ETHERTSM.NLM C:\SRV312
               >COPY A:\NWSERVER\312\C110w.LAN C:\SRV312

        5. Start the NetWare Server.

           > CD \SRV312
           > SERVER

        6. From the Novell Server side, execute "LOAD INSTALL".  Type:

              LOAD INSTALL

           Select <System Options>
           Select <Edit AUTOEXEC.NCF File>

        7. Add the following commands into the server's AUTOEXEC.NCF file.

           Search Add C:\SRV312

           LOAD NBI.NLM
           LOAD MSM.NLM

           LOAD C110w SLOT=1 FRAME=Ethernet_802.3 NAME=C110w_1_E83
           BIND IPX C110w_1_E83 NET=1111

           LOAD C110w SLOT=1 FRAME=Ethernet_802.2 NAME=C110w_1_E82
           BIND IPX C110w_1_E82 NET=1113

           LOAD C110w SLOT=1 FRAME=Ethernet_SNAP  NAME=C110w_1_ESP
           BIND IPX C110w_1_ESP NET=1115

           LOAD C110w SLOT=1 FRAME=Ethernet_II    NAME=C110w_1_EII
           BIND IPX C110w_1_EII NET=1117

           Note: The SLOT parameter should be set as the number of the PCI slot
                 on which C110w resides.

        8. Restart the server again.


      1. Installing Multiple LAN Adapters:

         The keyword "SLOT" is provided for multiple LAN adapters in a
         single server by the driver C110w.LAN. So, add "SLOT" in LOAD
         commands. For example:

         LOAD C110w SLOT=1 FRAME=Ethernet_802.2 NAME=LAN_A
         BIND IPX TO LAN_A NET=111
         LOAD C110w SLOT=2 FRAME=Ethernet_802.2 NAME=LAN_B
         BIND IPX TO LAN_B NET=222

      2. Use keyword AUTO, 100FULL, 100HALF, 10FULL, 10HALF to specify the
         media type of the C110w.

         For example:

            ; Specify AUTO-DETECT
            LOAD C110w AUTO FRAME=Ethernet_802.2 NAME=LAN_A
            BIND IPX TO LAN_A NET=111

            ; Specify 100Mbps, Half-duplex
            LOAD C110w 100HALF FRAME=Ethernet_802.2 NAME=LAN_A
            BIND IPX TO LAN_A NET=111

         The default media type is auto-detect(i.e. none of these keywords
         is specified).

      3. Installing One LAN adapter with Multiple Frame Types:

         When binding multiple frame types to one adapter, enter a LOAD
         and BIND statement for each frame type. Each LOAD statement will
         use a different network number on the bind statement.
         It is required to supply a name on each load line in order to avoid
         being prompted for which board to bind IPX to. If you do not
         have the name option in the AUTOEXEC.NCF, it will not execute
         completely without user intervention.


           LOAD C110w FRAME=ETHERNET_802.3 NAME=C110w_1_E83
           BIND IPX TO C110w_1_E83 NET=11111

           LOAD C110w FRAME=ETHERNET_802.2 NAME=C110w_1_E82
           BIND IPX TO C110w_1_E82 NET=33333

           BIND IPX TO C110w_1_ESP NET=55555

           LOAD C110w FRAME=ETHERNET_II    NAME=C110w_1_EII
           BIND IPX TO C110w_1_EII NET=77777

   If problems occur during the binding process, your screen will prompt
   you with error messages. Please refer to your NetWare 386 manual for
   details on these messages.

                                                        -- End --
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 0.50