LAN Server 4.0 Introduction: ------------- This document describes the procedure to install NDIS driver on OS/2 LAN Server 4.0 for 10/100Mbps Fast Ethernet Adapter. Location of Driver: \OS2NDIS\C110w.OS2 Installing driver procedure on OS/2 LAN Server 4.0: --------------------------------------------------- Before you start with the installation process, make sure that OS/2 LAN Server is properly installed. Similarly, your adapter should also be properly installed in your server. 1. In OS/2 window, Click the "MPTS" icon. 2. The screen will display the IBM Log, press "OK". 3. Select "Install" button. 4. Insert the C110w driver diskette, specify the driver path A:\OS2NDIS and press <Enter>. 5. When complete above step to load C110w.OS2 into OS/2 system, then configure your system. 6. The same step as step 3, select "Configure" button. 7. The screen will display "Configure" dialog box and select "LAN adapters and protocols" then press "configure" button. 8. The screen will display "LAPS Configuration" dialog box, move highlight to "10/100Mbps Fast Ethernet Adapter" item in "Network Adapter" window, and select "NetBios" protocol. Press "OK". 9. Installation is complete now. Reset your PC by turning it off and on.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.