PCTCP.TXT Driver File Contents (CB110-16.zip)

                CB110-16 10/100Mbps PC Card Installation
                                 for FTP PC/TCP


 Introduction
 ------------
        This installation assumes that the PC Card devices are working
        properly. Please consult "Installation Hints for DOS" 
        for help with PC Card drivers. Getting Started will describe 
        the installation instructions.


 Getting Started
 ---------------
        Execute Cb16.COM by typing:

              >Cb16 [/option] <packet_int_no>

              <packet_int_no> is the software interrupt vector number used
                              by the packet driver program. This can be
                              from 96 to 128.

              -?              Show available parameters.
              -d              Delay Initial - The driver program will not
                              initialize the network interface card until the
                              packet driver program is accessed by its upper
                              layer program.
              -i              Force driver to report itself as IEEE 802.3 
                              instead of Ethernet II.
              -n              NetWare conversion.  Converts 802.3 packets 
                              into 8137 packets
              -w              Windows hack, obsoleted by winpkt
              -p              Promiscuous mode disable
              -a              Auto-Negotiation Mode
              -1              Line Speed 10M, Half Duplex Mode
              -2              Line Speed 10M, Full Duplex Mode
              -3              Line Speed 100M, Half Duplex Mode
              -4              Line Speed 100M, Full Duplex Mode
              -u              Unload the packet driver.

              See INST_DOS.TXT for additional parameters

       Execute the ETHDRV.EXE and IDRIVE.EXE device driver programs.
          These programs are provided by FTP.

       FTP's PC/TCP and associated programs are ready to be used.
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 2.13