Filename : K92ARELS.TXT
Release Notification
**************************************************************************
NTUC0 ENE KB926 EC-FW release (Rev. 0.16) 9-25-2009
File name : K92A016A.ROM
Base on : K92A015A.ROM
Checksum : BA4F
Notification:
1.> Need flash EC's boot block? --> NO
2.> Do not use on A test M/B.
Fixed:
1.> Fix system can't show "< > \" on Danish keyboard.
Known issue:
Modified:
Add function:
**************************************************************************
NTUC0 ENE KB926 EC-FW release (Rev. 0.15) 9-17-2009
File name : K92A015A.ROM
Base on : K92A014A.ROM
Checksum : BA4E
Notification:
1.> Need flash EC's boot block? --> NO
2.> Do not use on A test M/B.
3.> Use to HotKey Utility V1.0.0.9C.
Fixed:
1.> [CIC009] 3G OSD will change with hotkey setting when press wireless
button three times continuously (3G original State is off).
Known issue:
Modified:
Add function:
**************************************************************************
NTUC0 ENE KB926 EC-FW release (Rev. 0.14) 8-17-2009
File name : K92A014A.ROM
Base on : K92A013A.ROM
Checksum : C0BE
Notification:
1.> Need flash EC's boot block? --> NO
2.> Do not use on A test M/B.
Fixed:
Known issue:
Modified:
1.> Modify Brightness Up/Down function send SCI for XP.
Add function:
**************************************************************************
NTUC0 ENE KB926 EC-FW release (Rev. 0.13) 7-31-2009
File name : K92A013A.ROM
Base on : K92A012A.ROM
Checksum : 0B5E
Notification:
1.> Need flash EC's boot block? --> NO
2.> Do not use on A test M/B.
Fixed:
Known issue:
Modified:
1.> Modify LCD/CRT Switch function for Win7.
Add function:
**************************************************************************
NTUC0 ENE KB926 EC-FW release (Rev. 0.12) 7-22-2009
File name : K92A012A.ROM
Base on : K92A010A.ROM
Checksum : B606
Notification:
1.> Need flash EC's boot block? --> NO
2.> Do not use on A test M/B.
Fixed:
Known issue:
Modified:
1.> Modify keyboard function.
- Menu and R-Ctrl function swap.
2.> Update NTUC0 Thermal Control Table A05.
3.> Enable deepsleep function.
4.> Modify WXMIT_OFF# pin's behavior of Huawei EM770.
Add function:
**************************************************************************
NTUC0 ENE KB926 EC-FW release (Rev. 0.10) 7-06-2009
File name : K92A010A.ROM
Base on : K92A009A.ROM
Checksum : 24D4
Notification:
1.> Need flash EC's boot block? --> NO
2.> Do not use on A test M/B.
Fixed:
Known issue:
Modified:
1.> Modify Huawei EM770 issue of device lost after resuming from S3.
2.> Update Common code V55.
Add function:
**************************************************************************
NTUC0 ENE KB926 EC-FW release (Rev. 0.09) 7-01-2009
File name : K92A009A.ROM
Base on : K92A008A.ROM
Checksum : FAC5
Notification:
1.> Need flash EC's boot block? --> NO
2.> Do not use on A test M/B.
Fixed:
Known issue:
Modified:
1.> Modify hot key function for new Benq keyboard.
2.> Remove work-around that CHGVADJ always output 1.876V.
Add function:
**************************************************************************
NTUC0 ENE KB926 EC-FW release (Rev. 0.08) 6-24-2009
File name : K92A008A.ROM
Base on : K92A007A.ROM
Checksum : 2D36
Notification:
1.> Need flash EC's boot block? --> NO
2.> Do not use on A test M/B.
Fixed:
Known issue:
Modified:
1.> Add Fn+ESC for Touch pad disable/enable function.
2.> Update NTUC0 SW parameter VerX02.
Add function:
**************************************************************************
NTUC0 ENE KB926 EC-FW release (Rev. 0.07) 6-8-2009
File name : K92A007A.ROM
Base on : K92A006A.ROM
Checksum : E7D8
Notification:
1.> Need flash EC's boot block? --> NO
2.> Do not use on A test M/B.
Fixed:
Known issue:
Modified:
1.> Update NTUC0 Thermal Control Table A02.
Add function:
**************************************************************************
NTUC0 ENE KB926 EC-FW release (Rev. 0.06) 6-5-2009
File name : K92A006A.ROM
Base on : K92A005A.ROM
Checksum : 8C93
Notification:
1.> Need flash EC's boot block? --> NO
Fixed:
Known issue:
Modified:
1.> Write EEPROM MBID after B stage.
- 0x01 B stage
- 0x02 C stage
- 0x03 MP
2.> Modify CMOS_ON#, BT_ON# and WWAN_LED_MO# pin define of B stage.
Add function:
1.> Implement CC-CV function.
**************************************************************************
NTUC0 ENE KB926 EC-FW release (Rev. 0.05) 5-21-2009
File name : K92A005A.ROM
Base on : K92A004A.ROM
Checksum : DA68
Notification:
1.> Need flash EC's boot block? --> NO
Fixed:
Known issue:
Modified:
1.> Update NTUC0 Thermal Control Table A00.
2.> Disable Fan full on.
3.> Enable over temperature shutdown.
4.> Enable thermal communication fail shutdown.
Add function:
**************************************************************************
NTUC0 ENE KB926 EC-FW release (Rev. 0.04) 5-14-2009
File name : K92A004A.ROM
Base on : K92A003A.ROM
Checksum : D9F9
Notification:
1.> Need flash EC's boot block? --> YES
Fixed:
Known issue:
Modified:
1.> Modify OS type to EC name space 0xA3 bit2, bit1 and bit0.
2.> Enable watchdog function.
3.> Disable EC Debug message.
Add function:
**************************************************************************
NTUC0 ENE KB926 EC-FW release (Rev. 0.03) 5-12-2009
File name : K92A003A.ROM
Base on : K92A002A.ROM
Checksum : 0234
Notification:
1.> Need flash EC's boot block? --> NO
Fixed:
Known issue:
Modified:
1.> Modify EC_MUTE# pin's behavior.
2.> Modify 3G active state from EC name space 0xBB bit6 to bit5.
Add function:
1.> Implement Wireless button function.
**************************************************************************
NTUC0 ENE KB926 EC-FW release (Rev. 0.02) 5-7-2009
File name : K92A002A.ROM
Base on : K92A001A.ROM
Checksum : C8F4
Notification:
1.> Need flash EC's boot block? --> NO
Fixed:
Known issue:
Modified:
1.> Add workaround to EC_SCI# pin's behavior of residual voltage.
2.> Modify power sequence to KHLBx.
Add function:
**************************************************************************
NTUC0 ENE KB926 EC-FW release (Rev. 0.01) 4-30-2009
File name : K92A001A.ROM
Base on : K92A001A.T01
Checksum : AB7E
Notification:
1.> Need flash EC's boot block? --> NO
Fixed:
Known issue:
Modified:
1.> Modify SYSON pin's behavior.
2.> Wireless/bluetooth/3G power always on.
3.> Change battery LED behavior.
Add function:
**************************************************************************
NTUC0 ENE KB926 EC-FW release (Rev. 0.01 T01) 4-17-2009
File name : K92A001A.T01
Base on : K53A010A.ROM
Checksum : AA7F
Notification:
1.> Need flash EC's boot block? --> YES
2.> Code base KHLBx
Fixed:
Known issue:
Modified:
1.> Initial pin define.
2.> Enable Fan full on.
3.> Disable over temperature shutdown.
4.> Disable thermal communication fail shutdown.
5.> Enable EC Debug message.
5.> Enable PORT80 Debug message.
7.> Disable watchdog function.
8.> Disable deepsleep function.
9.> Modify power sequence.
10.> Update NTUC0 SW parameter VerX01.
Add function:
**************************************************************************
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.