[Identification]
OptionType = SCSI
[LanguagesSupported]
ENG
[Options]
"ARCTPI" = ARCTPI
[OptionsTextENG]
"ARCTPI" = "ARCTPI"
[MiniportDrivers]
ARCTPI = !SERVICE_KERNEL_DRIVER, "SCSI Miniport", !SERVICE_ERROR_NORMAL, 17, %SystemRoot%\System32\IoLogMsg.dll , 7
[Identify]
read-syms Identification
set Status = STATUS_SUCCESSFUL
set Identifier = $(OptionType)
set Media = #("Source Media Descriptions", 1, 1)
Return $(Status) $(Identifier) $(Media)
[ReturnOptions]
set Status = STATUS_FAILED
set OptionList = {}
set OptionTextList = {}
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
goto returnoptions
else
set Status = STATUS_NOLANGUAGE
goto finish_ReturnOptions
endif
returnoptions = +
set OptionList = ^(Options, 0)
set OptionTextList = ^(OptionsText$($0), 1)
set Status = STATUS_SUCCESSFUL
finish_ReturnOptions = +
Return $(Status) $(OptionList) $(OptionTextList)
[InstallOption]
set KeyName = "System\CurrentControlSet\Services\Pcmcia\DataBase"
OpenRegKey $(!REG_H_LOCAL) "" $(KeyName) $(!REG_KEY_ALL_ACCESS) PcmciaKeyHandle
ifstr(i) $(PcmciaKeyHandle) != ""
OpenRegKey $(!REG_H_LOCAL) "" $(KeyName)"\ARC" $(!REG_KEY_ALL_ACCESS) TestKeyHandle
ifstr(i) $(TestKeyHandle) == ""
CreateRegKey $(PcmciaKeyHandle) {"ARC",0,GenericClass} "" $(!REG_KEY_ALL_ACCESS) "" MfgKeyHandle
endif
OpenRegKey $(!REG_H_LOCAL) "" $(KeyName)"\ARC\ATAPI" $(!REG_KEY_ALL_ACCESS) CDROMKeyHandle
ifstr(i) $(CDROMKeyHandle) != ""
DeleteRegTree $(MfgKeyHandle) "ATAPI"
endif
OpenRegKey $(!REG_H_LOCAL) "" $(KeyName)"\ARC\SLIMZIP" $(!REG_KEY_ALL_ACCESS) SZIPKeyHandle
ifstr(i) $(SZIPKeyHandle) != ""
DeleteRegTree $(MfgKeyHandle) "SLIMZIP"
endif
CreateRegKey $(MfgKeyHandle) {"ATAPI",0,GenericClass} "" $(!REG_KEY_ALL_ACCESS) "" CDROMKeyHandle
SetRegValue $(CDROMKeyHandle) {Driver,0,$(!REG_VT_SZ),"ARCTPI"}
SetRegValue $(CDROMKeyHandle) {DeviceType,0,$(!REG_VT_SZ),"SCSI"}
CloseRegKey $(CDROMKeyHandle)
CreateRegKey $(MfgKeyHandle) {"SLIMZIP",0,GenericClass} "" $(!REG_KEY_ALL_ACCESS) "" SZIPKeyHandle
SetRegValue $(SZIPKeyHandle) {Driver,0,$(!REG_VT_SZ),"ARCTPI"}
SetRegValue $(SZIPKeyHandle) {DeviceType,0,$(!REG_VT_SZ),"SCSI"}
CloseRegKey $(SZIPKeyHandle)
CloseRegKey $(MfgKeyHandle)
CloseRegKey $(TestKeyHandle)
endif
CloseRegKey $(PcmciaKeyHandle)
set KeyName = "System\CurrentControlSet\Services\Resman\DataBase"
OpenRegKey $(!REG_H_LOCAL) "" $(KeyName) $(!REG_KEY_ALL_ACCESS) ResmanKeyHandle
ifstr(i) $(ResmanKeyHandle) != ""
OpenRegKey $(!REG_H_LOCAL) "" $(KeyName)"\ARC" $(!REG_KEY_ALL_ACCESS) TestKeyHandle
ifstr(i) $(TestKeyHandle) == ""
CreateRegKey $(ResmanKeyHandle) {"ARC",0,GenericClass} "" $(!REG_KEY_ALL_ACCESS) "" MfgKeyHandle
endif
OpenRegKey $(!REG_H_LOCAL) "" $(KeyName)"\ARC\ATAPI" $(!REG_KEY_ALL_ACCESS) CDROMKeyHandle
ifstr(i) $(CDROMKeyHandle) != ""
DeleteRegTree $(MfgKeyHandle) "ATAPI"
endif
OpenRegKey $(!REG_H_LOCAL) "" $(KeyName)"\ARC\SLIMZIP" $(!REG_KEY_ALL_ACCESS) SZIPKeyHandle
ifstr(i) $(SZIPKeyHandle) != ""
DeleteRegTree $(MfgKeyHandle) "SLIMZIP"
endif
CreateRegKey $(MfgKeyHandle) {"ATAPI",0,GenericClass} "" $(!REG_KEY_ALL_ACCESS) "" CDROMKeyHandle
SetRegValue $(CDROMKeyHandle) {Driver,0,$(!REG_VT_SZ),"ARCTPI"}
SetRegValue $(CDROMKeyHandle) {DeviceType,0,$(!REG_VT_SZ),"SCSI"}
CloseRegKey $(CDROMKeyHandle)
CreateRegKey $(MfgKeyHandle) {"SLIMZIP",0,GenericClass} "" $(!REG_KEY_ALL_ACCESS) "" SZIPKeyHandle
SetRegValue $(SZIPKeyHandle) {Driver,0,$(!REG_VT_SZ),"ARCTPI"}
SetRegValue $(SZIPKeyHandle) {DeviceType,0,$(!REG_VT_SZ),"SCSI"}
CloseRegKey $(SZIPKeyHandle)
CloseRegKey $(MfgKeyHandle)
CloseRegKey $(TestKeyHandle)
endif
CloseRegKey $(ResmanKeyHandle)
set Status = STATUS_FAILED
set DrivesToFree = {}
set Option = $($1)
set SrcDir = $($2)
set AddCopy = $($3)
set DoCopy = $($4)
set DoConfig = $($5)
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
else
set Status = STATUS_NOLANGUAGE
goto finish_InstallOption
endif
read-syms Strings$($0)
set OptionList = ^(Options, 0)
ifcontains $(Option) in $(OptionList)
else
Debug-Output "SCSI.INF: SCSI option is not supported."
goto finish_InstallOption
endif
set OptionList = ""
set MiniportDriver = #(Options, $(Option), 1)
set Type = $(#(MiniportDrivers, $(MiniportDriver), 1))
set Group = #(MiniportDrivers, $(MiniportDriver), 2)
set ErrorControl = $(#(MiniportDrivers, $(MiniportDriver), 3))
set Tag = #(MiniportDrivers, $(MiniportDriver), 4)
set EventMessageFile = #(MiniportDrivers, $(MiniportDriver), 5)
set TypesSupported = #(MiniportDrivers, $(MiniportDriver), 6)
set Start = $(!SERVICE_BOOT_START)
installtheoption = +
ifstr(i) $(AddCopy) == "YES"
set DoActualCopy = NO
set FileToCheck = #(Files-ScsiMiniportDrivers, $(MiniportDriver), 2)
LibraryProcedure STATUS,$(!LIBHANDLE),CheckFileExistance $(!STF_WINDOWSSYSPATH)"\drivers\"$(FileToCheck)
ifstr(i) $(STATUS) == NO
set DoActualCopy = YES
endif
ifstr(i) $(DoActualCopy) == NO
shell "subroutn.inf" DriversExist $($0) $(String1)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "SCSI.INF: shelling DriversExist failed"
goto finish_InstallOption
endif
ifstr(i) $($R0) == STATUS_CURRENT
else-ifstr(i) $($R0) == STATUS_NEW
set DoActualCopy = YES
else-ifstr(i) $($R0) == STATUS_USERCANCEL
Debug-Output "SCSI.INF: User cancelled SCSI installation"
goto finish_InstallOption
else
Debug-Output "SCSI.INF: Error reported in DriversExist routine in SUBROUTN.INF"
goto finish_InstallOption
endif
endif
ifstr(i) $(DoActualCopy) == YES
shell "subroutn.inf" DoAskSourceEx $(SrcDir) $(String2)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "SCSI.INF: shelling DoAskSourceEx failed"
goto finish_InstallOption
endif
ifstr(i) $($R0) == STATUS_SUCCESSFUL
set SrcDir = $($R1)
ifstr(i) $($R2) != ""
set DrivesToFree = >($(DrivesToFree), $($R2))
endif
else
Debug-Output "SCSI.INF: User cancelled asking source."
goto finish_InstallOption
endif
install Install-AddCopyOption
ifstr(i) $(STF_INSTALL_OUTCOME) != "STF_SUCCESS"
Debug-Output "Adding SCSI files to copy list failed"
goto finish_InstallOption
endif
else
set DoCopy = NO
endif
endif
ifstr(i) $(DoCopy) == "YES"
read-syms ProgressCopy$($0)
install Install-DoCopyOption
ifstr(i) $(STF_INSTALL_OUTCOME) == "STF_FAILURE"
Debug-Output "Copying files failed"
goto finish_InstallOption
else-ifstr(i) $(STF_INSTALL_OUTCOME) == "STF_USERQUIT"
set Status = STATUS_USERCANCEL
goto finish_InstallOption
endif
endif
ifstr(i) $(DoConfig) == "YES"
shell "registry.inf" CheckSetupModify
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto finish_InstallOption
endif
ifstr(i) $($R0) != STATUS_SUCCESSFUL
goto finish_InstallOption
endif
set ServiceNode = $(MiniportDriver)
set ServiceBinary = System32\drivers\#(Files-ScsiMiniportDrivers, $(MiniportDriver), 2)
set ServicesValues = { +
{Type, 0, $(!REG_VT_DWORD), $(Type) }, +
{Start, 0, $(!REG_VT_DWORD), $(Start) }, +
{Group, 0, $(!REG_VT_SZ), $(Group) }, +
{ErrorControl, 0, $(!REG_VT_DWORD), $(ErrorControl) }, +
{Tag, 0, $(!REG_VT_DWORD), $(Tag) }, +
{BinaryPathName, 0, $(!REG_VT_EXPAND_SZ), $(ServiceBinary) } +
}
set ParametersValues = ""
set DeviceValues = {}
set EventLogValues = { +
{EventMessageFile, 0, $(!REG_VT_EXPAND_SZ), $(EventMessageFile) }, +
{TypesSupported, 0, $(!REG_VT_DWORD), $(TypesSupported) } +
}
shell "registry.inf" MakeServicesEntry $(ServiceNode) +
$(ServicesValues) +
$(ParametersValues) +
$(DeviceValues) +
$(EventLogValues) +
Parameters
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "Couldn't execute MakeServicesEntry in registry.inf"
goto finish_InstallOption
endif
ifstr(i) $($R0) != STATUS_SUCCESSFUL
Debug-Output "MakeServicesEntry failed for SCSI"
goto finish_InstallOption
endif
endif
set Status = STATUS_SUCCESSFUL
finish_InstallOption = +
ForListDo $(DrivesToFree)
LibraryProcedure STATUS,$(!LIBHANDLE), DeleteNetConnection $($) "TRUE"
EndForListDo
Return $(Status)
[Install-AddCopyOption]
AddSectionKeyFileToCopyList Files-ScsiMiniportDrivers +
$(MiniportDriver) +
$(SrcDir) +
$(!STF_WINDOWSSYSPATH)\drivers
exit
[Install-DoCopyOption]
CopyFilesInCopyList
exit
[DeInstallOption]
set KeyName = "System\CurrentControlSet\Services\Pcmcia\DataBase"
OpenRegKey $(!REG_H_LOCAL) "" $(KeyName) $(!REG_KEY_ALL_ACCESS) PcmciaKeyHandle
OpenRegKey $(!REG_H_LOCAL) "" $(KeyName)"\ARC" $(!REG_KEY_ALL_ACCESS) TestKeyHandle
ifstr(i) $(TestKeyHandle) != ""
DeleteRegTree $(PcmciaKeyHandle) "ARC"
endif
OpenRegKey $(!REG_H_LOCAL) "" $(KeyName)"\ATAPI" $(!REG_KEY_ALL_ACCESS) TestKeyHandle
ifstr(i) $(TestKeyHandle) != ""
DeleteRegTree $(PcmciaKeyHandle) "ATAPI"
endif
CloseRegKey $(TestKeyHandle)
OpenRegKey $(!REG_H_LOCAL) "" $(KeyName)"\SLIMZIP" $(!REG_KEY_ALL_ACCESS) TestKeyHandle
ifstr(i) $(TestKeyHandle) != ""
DeleteRegTree $(PcmciaKeyHandle) "SLIMZIP"
endif
CloseRegKey $(TestKeyHandle)
CloseRegKey $(PcmciaKeyHandle)
set KeyName = "System\CurrentControlSet\Services\Resman\DataBase"
OpenRegKey $(!REG_H_LOCAL) "" $(KeyName) $(!REG_KEY_ALL_ACCESS) ResmanKeyHandle
ifstr(i) $(ResmanKeyHandle) != ""
OpenRegKey $(!REG_H_LOCAL) "" $(KeyName)"\ARC" $(!REG_KEY_ALL_ACCESS) TestKeyHandle
ifstr(i) $(TestKeyHandle) != ""
DeleteRegTree $(ResmanKeyHandle) "ARC"
endif
CloseRegKey $(TestKeyHandle)
OpenRegKey $(!REG_H_LOCAL) "" $(KeyName)"\ATAPI" $(!REG_KEY_ALL_ACCESS) TestKeyHandle
ifstr(i) $(TestKeyHandle) != ""
DeleteRegTree $(ResmanKeyHandle) "ATAPI"
endif
CloseRegKey $(TestKeyHandle)
OpenRegKey $(!REG_H_LOCAL) "" $(KeyName)"\SLIMZIP" $(!REG_KEY_ALL_ACCESS) TestKeyHandle
ifstr(i) $(TestKeyHandle) != ""
DeleteRegTree $(ResmanKeyHandle) "SLIMZIP"
endif
CloseRegKey $(TestKeyHandle)
CloseRegKey $(ResmanKeyHandle)
endif
set Status = STATUS_FAILED
set Option = $($1)
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
else
set Status = STATUS_NOLANGUAGE
goto finish_DeInstallOption
endif
read-syms Strings$($0)
set OptionList = ^(Options, 0)
ifcontains $(Option) in $(OptionList)
else
goto finish_DeInstallOption
endif
set OptionList = ""
set MiniportDriver = #(Options, $(Option), 1)
set MiniportFile = #(Files-ScsiMiniportDrivers, $(MiniportDriver), 2)
set FilePath = $(!STF_WINDOWSSYSPATH)"\drivers\"$(MiniportFile)
LibraryProcedure STATUS,$(!LIBHANDLE),CheckFileExistance $(FilePath)
ifstr(i) $(STATUS) == "NO"
set Status = STATUS_SUCCESSFUL
goto finish_DeInstallOption
endif
shell "registry.inf" GetServicesEntryStart $(MiniportDriver)
ifstr(i) $($R0) != "STATUS_SUCCESSFUL"
; this could happen if there is no start value or there is no
; key, in which case the option is not installed
set Status = STATUS_SUCCESSFUL
goto finish_DeInstallOption
endif
ifstr(i) $($R1) == $(!SERVICE_BOOT_START)
shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "WARNING" $(String3)
ifstr(i) $($R0) != STATUS_SUCCESSFUL
goto do_removal
endif
ifstr(i) $($R1) == "CANCEL"
goto finish_DeInstallOption
endif
endif
do_removal =+
shell "registry.inf" RemoveServicesEntry $(MiniportDriver)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "SCSI.INF: Failed to shell RemoveServicesEntry"
goto finish_DeInstallOption
endif
ifstr(i) $($R0) != STATUS_SUCCESSFUL
Debug-Output "SCSI.INF: Failed to disable services entry"
goto finish_DeInstallOption
endif
set Status = STATUS_SUCCESSFUL
finish_DeInstallOption =+
return $(Status)
[GetInstalledOptions]
set Status = STATUS_FAILED
set InstalledOptions = {}
set InstalledOptionsText = {}
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
else
set Status = STATUS_NOLANGUAGE
goto finish_GetInstalledOptions
endif
set OptionList = ^(Options, 0)
ForListDo $(OptionList)
set MiniportDriver = #(Options, $($), 1)
set MiniportFile = #(Files-ScsiMiniportDrivers, $(MiniportDriver), 2)
set FilePath = $(!STF_WINDOWSSYSPATH)"\drivers\"$(MiniportFile)
LibraryProcedure STATUS,$(!LIBHANDLE),CheckFileExistance $(FilePath)
ifstr(i) $(STATUS) == "YES"
shell "registry.inf" GetServicesEntryStart $(MiniportDriver)
ifint $($ShellCode) == $(!SHELL_CODE_OK)
ifstr(i) $($R0) == STATUS_SUCCESSFUL
ifstr(i) $($R1) != $(!SERVICE_DISABLED)
set OptionText = #(OptionsText$($0), $($), 1)
set InstalledOptions = >($(InstalledOptions), $($))
set InstalledOptionsText = >($(InstalledOptionsText), $(OptionText))
endif
endif
endif
endif
EndForListDo
set Status = STATUS_SUCCESSFUL
finish_GetInstalledOptions =+
Return $(Status) $(InstalledOptions) $(InstalledOptionsText)
[ProgressCopyENG]
ProCaption = "Windows NT Setup"
ProCancel = "Cancel"
ProCancelMsg = "Windows NT is not correcly installed. Are you sure you want "+
"to cancel copying files?"
ProCancelCap = "Setup Message"
ProText1 = "Copying:"
ProText2 = "To:"
[StringsENG]
String1 = "PCCARD ATAPI"
String2 = "Please enter a:\winnt or b:\winnt to copy the PCCARD ATAPI "+
"files. Then choose Continue."
String3 = "The PCCARD ATAPI has been marked as a boot device. Removing "+
"it may cause the system not to boot."$(!LF)$(!LF)"Are you sure "+
"you want to remove it."
[Source Media Descriptions]
1 = "PCCARD ATAPI Drivers Diskette", TAGFILE = disk1
[Files-ScsiMiniportDrivers]
ARCTPI = 1, ARCTPI.sys
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.