Filename : K2EARELS.TXT Release Notification ************************************************************************** JHT0x_JHL9x ENE KB926 EC-FW release (Rev. 1.07 ROM) 3-10-2009 File name : K2EA107A.ROM Base on : K2EA106A.ROM Checksum : 2385 Notification: 1.> Need flash EC's boot block? --> No Fixed: Known issue: Modified: 1.> Modify wrong adaptor protection. (If AC_IN drops 5 times in 10 sec, set AC_OFF to high.) Add function: ************************************************************************** JHT0x_JHL9x ENE KB926 EC-FW release (Rev. 1.06 ROM) 9-25-2008 File name : K2EA106A.ROM Base on : K2EA105A.ROM Checksum : FBA3 Notification: 1.> Need flash EC's boot block? --> No Fixed: Known issue: Modified: 1.> Implemented the newest fan table of "JHXXX_Thermal Control Table_0924.xls" Add function: ************************************************************************** JHT0x_JHL9x ENE KB926 EC-FW release (Rev. 1.05 ROM) 9-10-2008 File name : K2EA105A.ROM Base on : K2EA104A.ROM Checksum : AFAC Notification: 1.> Need flash EC's boot block? --> No Fixed: Known issue: 1.> Fixed ATCIC02 => LLB LED blink 18 times. Modified: 1.> Implemented the newest fan table of "JHXXX_Thermal Control Table_0909.xls" Add function: ************************************************************************** JHT0x_JHL9x ENE KB926 EC-FW release (Rev. 1.04 ROM) 7-22-2008 File name : K2EA104A.ROM Base on : K2EA103A.ROM Checksum : ED08 Notification: 1.> Need flash EC's boot block? --> No Fixed: Known issue: Modified: 1.> Change ESB CLK from 11MHz to 5.5MHz. Add function: ************************************************************************** JHT0x_JHL9x ENE KB926 EC-FW release (Rev. 1.03 ROM) 7-3-2008 File name : K2EA103A.ROM Base on : K2EA102A.ROM Checksum : BA38 Notification: 1.> Need flash EC's boot block? --> No Fixed: Known issue: Modified: 1.> Implement Thermal fan control table base on "JHXXX_Thermal Control Table_0703.xls". 1.> Support ENE and Tong-Tie conductive function. Add function: ************************************************************************** JHT0x_JHL9x ENE KB926 EC-FW release (Rev. 1.02 ROM) 6-18-2008 File name : K2EA102A.ROM Base on : K2EA101A.ROM Checksum : 3848 Notification: 1.> Need flash EC's boot block? --> No Fixed: Known issue: Modified: 1.> Turn off AC_OFF will be pulled high 2sec when wrong adaptor function is turned on. Add function: 1.> Add Fn scan code. ************************************************************************** JHT0x_JHL9x ENE KB926 EC-FW release (Rev. 1.01 ROM) 6-04-2008 File name : K2EA101A.ROM Base on : K2EA100A.ROM Checksum : 7715 Notification: 1.> Need flash EC's boot block? --> No Fixed: Known issue: Modified: Add function: 1.> Set name space 0x06 bit0 when press F2 in S0. Clear name space 0x06 bit0 when shutdown and restart. ************************************************************************** JHT0x_JHL9x ENE KB926 EC-FW release (Rev. 1.00 ROM) 5-28-2008 File name : K2EA100A.ROM Base on : K2EA012A.ROM Checksum : 5C15 Notification: 1.> Need flash EC's boot block? --> No Fixed: Known issue: Modified: 1.> Implement Thermal release's Fan control table of "JHXXX_PVT_Thermal Control Table_0527.xls". Add function: ************************************************************************** JHT0x_JHL9x ENE KB926 EC-FW release (Rev. 0.12 ROM) 5-07-2008 File name : K2EA012A.ROM Base on : K2EA011A.ROM Checksum : 410E Notification: 1.> Need flash EC's boot block? --> No Fixed: 1.> BCIC236. Known issue: Modified: 1.> Implement common code. Item L08042402¡BL08042403¡BL08042407¡BL08040701. 2.> Implement fan table of JHXXX_PVT_Thermal Control Table_0502. 3.> Implement detect ATI VGA temp reading function. 4.> Implement common module brightness table which release by power Dennis on 2008/5/6. Add function: ************************************************************************** JHT0x_JHL9x ENE KB926 EC-FW release (Rev. 0.11 ROM) 4-24-2008 File name : K2EA011A.ROM Base on : K2EA010A.ROM Checksum : 3730 Notification: 1.> Need flash EC's boot block? --> No Fixed: Known issue: Modified: 1.> Support NS thermal chip. 2.> Delay 7 sec to turn off always power when power down in battery only.(Workaround for S/W) Add function: ************************************************************************** JHT0x_JHL9x ENE KB926 EC-FW release (Rev. 0.10 ROM) 4-17-2008 File name : K2EA010A.ROM Base on : K2EA009A.ROM Checksum : CD0B Notification: 1.> Need flash EC's boot block? --> No Fixed: Known issue: Modified: 1.> Open AC_IN protect function. 2.> Close BT power when system enter DOS mode. Add function: ************************************************************************** JHT0x_JHL9x ENE KB926 EC-FW release (Rev. 0.09 ROM) 4-10-2008 File name : K2EA009A.ROM Base on : K2EA008A.ROM Checksum : B907 Notification: 1.> Need flash EC's boot block? --> No Fixed: 1.> Fixed BCIC182 issue Descripion:<JHXXX>CPU Frequency show abnormal in DC Mode after flash BIOS: B0.06 (P1) 2.> Fixed BC001 issue Description:<JHL90_M86M+256MB> System shutdown(0x0B) while system idle under DOS. Known issue: Modified: 1.> Upgrade common code from V40 to V42. 2.> Modify SMSC thermal regulator factor from 12 to 15, just for Penrye CPU. Add function: ************************************************************************** JHT0x_JHL9x ENE KB926 EC-FW release (Rev. 0.08 ROM) 4-01-2008 File name : K2EA008A.ROM Base on : K2EA007A.ROM Checksum : 7BEE Notification: 1.> Need flash EC's boot block? --> No Fixed: Known issue: Modified: 1.> Change the EC stable time from 4 sec to 10 sec. 2.> Follow the Theraml's VGA control method to control the fan speed. Add function: ************************************************************************** JHT0x_JHL9x ENE KB926 EC-FW release (Rev. 0.07 ROM) 3-26-2008 File name : K2EA007A.ROM Base on : K2EA006A.ROM Checksum : 167A Notification: 1.> Need flash EC's boot block? --> No Fixed: Known issue: Modified: 1.> Close VGA over temperature shutdown function. 2.> Close DTS over temperature shutdown function. 3.> Follow the JHL90_JHT00 battery EC parameter v02A to modify the code. Add function: ************************************************************************** JHT0x_JHL9x ENE KB926 EC-FW release (Rev. 0.06 ROM) 3-10-2008 File name : K2EA006A.ROM Base on : K2EA005A.ROM Checksum : 2238 Notification: 1.> Need flash EC's boot block? --> No Fixed: Known issue: Modified: 1.> Open watch dog function. Add function: ************************************************************************** JHT0x_JHL9x ENE KB926 EC-FW release (Rev. 0.05 ROM) 3-06-2008 File name : K2EA005A.ROM Base on : K2EA004A.ROM Checksum : 023B Notification: 1.> Need flash EC's boot block? --> No Fixed: 1.> Fixed issue of AC156. Known issue: Modified: Add function: ************************************************************************** JHT0x_JHL9x ENE KB926 EC-FW release (Rev. 0.04 ROM) 3-03-2008 File name : K2EA004A.ROM Base on : K2EA003A.ROM Checksum : 7DC1 Notification: 1.> Need flash EC's boot block? --> Yes Fixed: Known issue: Modified: 1.> Implemented New adaptor protection function. 2.> Implemented deepsleep function. Add function: ************************************************************************** JHT0x_JHL9x ENE KB926 EC-FW release (Rev. 0.03 ROM) 2-26-2008 File name : K2EA003A.ROM Base on : K2EA002A.ROM Checksum : 5949 Notification: 1.> Need flash EC's boot block? --> Yes Fixed: 1.> Fixed in Fan first speed step auto tuning too slow. Known issue: Modified: 1.> Opened the CIR existence auto detect function. 2.> Implement Thermal table that thermal send it out on 2/19/2008. Add function: ************************************************************************** JHT0x_JHL9x ENE KB926 EC-FW release (Rev. 0.02 ROM) 2-14-2008 File name : K2EA002A.ROM Base on : K2EA001A.ROM Checksum : 6D59 Notification: 1.> Need flash EC's boot block? --> Yes Fixed: 1.> Fixed AC133 issue. (Issue Description: CIR does not work after installing driver V2.4) Known issue: Modified: 1.> Modify conductive sensor protocol from PS2 to I2C. 2.> Closed function: In S3 mode, when cover is opened will be waked up. 3.> Update common code from V37 to V40. Add function: ************************************************************************** JHT0x_JHL9x ENE KB926 EC-FW release (Rev. 0.01 ROM) 1-18-2008 File name : K2EA001A.ROM Base on : K2EA001A.T04 Checksum : 5626 Notification: 1.> Need flash EC's boot block? --> Yes Fixed: 1.> #AC024: Paues key scan code incorrect. Known issue: Modified: 1.> Modify power sequence. Add function: ************************************************************************** JHT0x_JHL9x ENE KB926 EC BIOS release (Rev. 0.01 T04) 1-14-2008 File name : K2EA001A.T04 Base on : K2EA001A.T01 Checksum : 486E Notification: 1.> Need flash EC's boot block? --> Yes Fixed: Known issue: Modified: 1.> Reverse Kill switch behavior (High be Low, Low be High). 2.> Set Vista flag to be 1. Add function: ************************************************************************** JHT0x_JHL9x ENE KB926 EC BIOS release (Rev. 0.01 T02) 12-27-2007 File name : K2EA001A.T02 Base on : K2EA001A.T01 Checksum : EA9B Notification: 1.> Need flash EC's boot block? --> Yes Fixed: Known issue: Modified: 1.> Always set wireless and bluetooth in on mode and existence. Add function: ************************************************************************** JHT0x_JHL9x ENE KB926 EC BIOS release (Rev. 0.01 T01) 12-20-2007 File name : K2EA001A.T01 Base on : k03a109a.ROM (IFT0x) Checksum : 50C1 Notification: 1.> Need flash EC's boot block? --> Yes 2.> power sequence is following IFT0x. Fixed: Known issue: Modified: 1.> Modify GPIO definition. 2.> Disable WatchDog function. 3.> Fan always full on. 4.> Define Index IO 0xFF2C. 5.> Extend SPI ROM size from 1M to 2M Add function: 1.> Settle two buffer to store eeprom's data in SPI rom, the address is from 128K to 136K 2.> Added EEPROM determine MBID function. **************************************************************************Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.