** CMI8338 PCI Audio Windows 95/98 Drivers Release Note ** ver 4.06.1090 01/13/2000 1. support special sampling rate (8000 & 22254Hz) in DirectSound functions for game Carnivores2 and Dark Vengence. 2. Make 3D posional audio more symmetrically between front and rear. ver 4.06.1089 12/29/99 1. Fix sound disappear problem when select EAX mode in game OUTCAST. 2. Fix sound problem in game Half-Life. 3. Support enable/disable two playback channel functions in registry, the default status is disable. 4. Default reject into suspend mode when using DirectSound functions. 5. MCI and DirectSound wave functions support four speakers mode. ver 4.06.1088 12/15/99 1. Improve DirectSound/3D update delay time make positonal audio move more smoothly. 2. DirectSound suspend control by the registry setting(DisDsSuspend). 3. Fix a problem that game Trespasser crash. ver 4.06.1087 11/10/99 1. Modify legacy device IRQ release processing for solving conflicted with a NET device. 2. Auto detect SPDIF-in signal sampling rate as 44.1/48KHz. Users do not have to set about this. 3. Uninstall program do not remove MODEM device. 4. Fix some games FM no output problem in Windows DOS box. 5. Fix WinDVD mute problem when switching from SPDIF-AC3 to 2/4 speakers mode. 6. Fix problem that cannot shutdown correctly with TAICOM MODEM. ver 4.06.1084 10/19/99 1. Fix problems in games including Comanche Gold,Unreal, Duaguen Keeper II and Prince of Persia 3D. 2. Fix calling problem in A3D compatible drivers. ver 4.06.1083 10/05/99 1. Fix GPF problem in Minevra testing program. ver 4.06.1082 10/02/99 1. Support 44.1/48K DirectSound wave output to SPDIF-out. 2. Uninstall program fix joystick device problem. ver 4.06.1081 09/20/99 1. Set default configuration value. Otherwise, Line-in can not share same phonejack with rear output. 2. Store SPDIF-in phase inverse status. ver 4.06.1080 09/03/99 1. New structure of DirectSound/DirectSound3D. 2. Run applications setup program after drivers installed. 3. Uninstall drivers program add removing applications. ver 4.05.1063 05/11/99 1.Fix MIDI keyboard hang problems. ver 4.05.1060 04/30/99 1.Open registry set legacy SB version. ver 4.06.1056 04/20/99 1. Fix sound problem when running DOS game DUKE3D & QUAKE. 2. Add setup DOS initial program during installation. ver 4.06.1055 04/12/99 1. Fix sound problem when running DOS game WARCRAFT2 & DOOM2. 2. Drivers version follow the WHQL naming rules that drivers supports DX6 the version must greater than 4.06. ver 4.05.1052 04/01/99 1. Optional CPU utilization for HRTF positional audio. ver 4.05.1050 03/23/99 1. Supports MCI four speakers mode for DVD. 2. Fix a bug that play FM with wave at the same time. 3. Open setting default volume control in INF file. 4. Enhance HRTF positional audio performance when using over four channels positional audio. 5. Drivers version naming changed according to Microsoft rules. 6. Restrict play two wave files simultaneously. ver 4.10.00.0144 02/09/99 1. Fix four speakers muted problem when switching mixer four speakers item during play DirectSound waves. 2. Optional CPU performance for HRTF positional audio. ver 4.10.00.0141 02/04/99 1. DirectSound functions support four speakers mode. ver 4.10.00.0140 02/02/99 1. Recover master and wave volume panning control. 2. Enhance positional audio performance. ver 4.10.00.0139 01/27/99 1. Change the legacy device ID. 2. Disable wave interpolation function. ver 4.10.00.0137 01/08/99 1. Fix ACT4.0 wave test problem. ver 4.10.00.0136 01/07/99 1. Solve the BitWave MODEM program sound problem. ver 4.10.00.0135 12/31/98 1. Solve the sound incontinous problem in AudioWinbench 99 testing. 2. Expanded DirectSound3D secondary buffer to 32. ver 4.10.00.0134 12/21/98 1. Solve the rear speakers sound problem when quit from AudioWinbench 99 in Win98. ver 4.10.00.0133 12/18/98 1. Solve the sound non-stop problem when quit from DirectSound3D games in Win98. 2. Modify resources management of DirectSound3D. ver 4.10.00.0132 12/17/98 1. Remove master and wave volume balance control. ver 4.10.00.0131 12/15/98 1. Add safety check in DirectSound functions. ver 4.10.00.0129 12/12/98 1. Fix wave volume mute control when use DirectSound to play wave. 2. Fix rear speakers volume controls when use DirectSound3D. ver 4.10.00.0128 12/11/98 1. Fix FM no output when play FM and wave at the same time in four speakers mode. 2. Fix volume panning control in four speakers mode. 3. Modify master volume control to fit all of mixer sources (including rear speakers) in four speakers mode. ver 4.10.00.0127 12/09/98 1. Modify master volume control in four speakers mode. ver 4.10.00.0126 12/08/98 1. Support four speakers when play wave. 2. Remove the rear speaker control in mixer. (Use wave output volume to control both front and rear speakers.) 3. Make mixer playback and recording volume control synchronously. 4. Solve DirectSound wave output format error When SPDIF-OUT enabled. ver 4.10.00.0125 12/02/98 1. Mute master volume during system suspended. 2. Default master volume -3dB decay. 3. Fix legacy device reload problem when come back from suspend mode. ver 4.10.00.0124 11/30/98 1. Solve the game REDLINE RACER sound mute problem when 3D sound enabled. 2. Fix legacy device problem when refresh the system in device manager. ver 4.10.00.0123 11/20/98 1. Legacy device IRQ channel shared with others device. ver 4.10.00.0122 11/17/98 1. Modify for A3D demo and Audio WinBench 99 noise problem. 2. Mixer default set CD,wave and FM output on. 3. Mixer default volume set to maximum. 4. Mixer volume control move Surround and SPIDF In to advanced controls. 5. Mixer recording control move SPDIF In to advanced controls. 6. Solve mixer Aux In left and right channels inverse when panning. ver 4.10.00.0121 11/10/98 1. Enable hardware SPDIF-out only when playing 44.1KHz wave. ver 4.10.00.0120 11/09/98 1. Resolve the problem that IRQ conflict with INTEL 730 AGP card. 2. Format check on SPDIF playing and recording when SPDIF-out enable. 3. Automatic check on SPDIF-in device attaching for recording. 4. Default installation mute all mixer output except wave and FM. ver 4.10.00.0119 11/04/98 1. Correct first installation FM and MPU401 not loaded. 2. Correct that WHQL(ACT4.0/HCT8.0) Dynamic configuration test failed. 3. Merge softMIDI device with DOS mode MPU-401 MIDI emulator. 4. Resolve WHQL(ACT4.0/HCT8.0) MIDI IN problem. ver 4.10.00.0118 10/20/98 1. Wave and softMIDI can playback simultaneously. 2. Resolve drivers conflicted with ATI AGP VGA card. 3. Add DOS mode MPU-401 MIDI emulator. 4. Add install Windows default mixer program.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.