1. jdvr_v42.exe Driver
2. Eng_Dvr.ini File Contents

Eng_Dvr.ini Driver File Contents (jdvr_v42.exe)

[DVR]
ERR_RUN="DVR is already running. Check running application program."

CHANGE_SCREEN_MODE="Change Display mode. System is rebooting now."
ERR_VERIFY_IDPASS = "User ID consist of 32 character. User password consists of 5 - 8 character. Not allow specific character"
ERR_BAD_PASS="Wrong Password"
ERR_BAD_USER_NAME ="Wrong User Name"

LOGIN_BOX="Login Dialog"
LOGIN_ID="  ID:"
LOGIN_PASSWD=" Password:"
OK="O K"
CANCEL="CANCEL"

CAM_NAME="Cam"
SETUP_QUIT = "Do you want save setup information?"

TOOLTIP_POWER_TITLE = "Close DVR"
TOOLTIP_POWER_DESC = "To run DVR, Double click DVR icon"
TOOLTIP_SETUP_TITLE = "Run Setup"
TOOLTIP_SETUP_DESC = "Setup DVR environment"
TOOLTIP_SEARCH_TITLE = "Run Search"
TOOLTIP_SEARCH_DESC = "View to stored image data, check dvr event log"
TOOLTIP_GENERAL_TITLE = "General Setup"
TOOLTIP_SENSORALARM_TITLE = "Sensor Alarm Setup"
TOOLTIP_CAMERAMOTION_TITLE = "Camera Motion Setup"
TOOLTIP_AUDIO_TITLE = "Audio Setup"
TOOLTIP_SCHEDULE_TITLE = "Schedule Setup"
TOOLTIP_SCHEUDLEDETAIL_TITLE = "Record frame Setup"
TOOLTIP_STORAGE_TITLE = "Storage Setup"
TOOLTIP_MISC_TITLE = "LM, Alert Setup"
TOOLTIP_SETUPQUIT_TITLE = "Quit Setup"
TOOLTIP_GENERAL_DESC = "Detail Setup Camera Signal, Communication, Compress .. "
TOOLTIP_SENSORALARM_DESC ="Match camera to sensor, Digital out"
TOOLTIP_CAMERAMOTION_DESC = "Adjust camera color, set motion area, match ptz"
TOOLTIP_AUDIO_DESC = "Match audio to camera, adjust gain, sensibility"
TOOLTIP_SCHEDULE_DESC = "Adjust camera record schedule"
TOOLTIP_SCHEDULEDETAIL_DESC = "Set camera record frame, adjust event to digital out"
TOOLTIP_STORAGE_DESC = "Adjust DVR storage system. Create or delete storage system"
TOOLTIP_MISC_DESC ="Set lineout channel, adjust alert system (to client, to email)"
TOOLTIP_SETUPQUIT_DESC ="When save DVR Information, Restart DVR"

TOOLTIP_ERROR_TITLE = "Dvr Error!"
TOOLTIP_SERIOUS_ERROR_TITLE = "Dvr Serious Error!"
TOOLTIP_ERROR_SYSTEM = "System Error (maybe system not stable state)"
TOOLTIP_ERROR_VIDEODEVICE = "Video Capture Device Error (Check Capture Driver or Device Card)"
TOOLTIP_ERROR_AUDIODEVICE = "Audio Capture Device Error (Check Capture Driver or Device Card)"
TOOLTIP_ERROR_OVERLAYDEVICE = "Overlay Device Error (Check Overlay Driver or Device Card)"
TOOLTIP_ERROR_STORAGE = "Storage Media Error (maybe not create storage media)"
TOOLTIP_ERROR_GRAPHICDEVICE = "Graphic Device Error (Check VGA Driver or Display Property)"
TOOLTIP_ERROR_DIRECTX = "Direct X Error (Check Install Direct 8.0 over or check VGA driver)"
TOOLTIP_ERROR_SOUNDDEVICE = "Sound Device Error (maybe not install sound device)"
TOOLTIP_ERROR_CODEC = "Codec Error (maybe not install codec)"
TOOLTIP_ERROR_PTZ = "PTZ Device Error (maybe fail initial PTZ Port)"
TOOLTIP_ERROR_COMMUNICATION = "Communication Device Error (Check LAN, MODEM device)"
TOOLTIP_ERROR_UNKNOW = "Unknown Error"

TOOLTIP_ALERT_TITLE = "DVR ALERT!"
TOOLTIP_ALERT_CAMERALOSS = "Alert camera loss singal"
TOOLTIP_ALERT_MOTION = "Alert motion detection"
TOOLTIP_ALERT_SENSOR = "Alert sensor detection"
TOOLTIP_ALERT_REMOTE = "Alert client command"
TOOLTIP_ALERT_STORAGE = "Alert storage media"
TOOLTIP_ALERT_UNKNOW = "Unknown alert"

[VIEWER]
LOGIN_USER="User login"
LOGOUT_USER="User logout"
RUN = "Run"
EXIT="Exit"
DEVICE_ON=" On"
DEVICE_OFF=" Off"
REMOTE_SETUP="Remote Setup"
PTZ_CONTROL="PTZ Control"
CHECK_ALIVE="DVR Running"
SYSTEM_REBOOT="System Reboot"
RECORDING_START="Recording Start"
RECORDGING_STOP="Recording Stop"
REGISTERWEBSERVER="Register Web Server"

REMOTESETUP_GENERAL=" [Changed On General Tab]"
REMOTESETUP_SENSORALARM="[Changed On Sensor Alarm Tab]"
REMOTESETUP_CAMERAMOTION="[Changed On Camera-Motion Tab]"
REMOTESETUP_AUDIO = "[Changed On Audio Tab]"
REMOTESETUP_SCHEDULE = "[Changed On Schedule Tab]"
REMOTESETUP_SCHEDULE_DETAIL ="[Changed On Detail-Schedule Tab]"
REMOTESETUP_STORAGE = "[Changed On Storage Tab]"
REMOTESETUP_MISC ="[Changed On Misc Tab]"

PTZ_LEFT = "PTZ[LEFT]"
PTZ_RIGHT = "PTZ[RIGHT]"
PTZ_UP = "PTZ[UP]"
PTZ_DOWN = "PTZ[DOWN]"
PTZ_ZOOMIN = "PTZ[ZOOM IN]"
PTZ_ZOOMOUT = "PTZ[ZOOM OUT]"
PTZ_FOCUSIN = "PTZ[FOCUS IN]"
PTZ_FOCUSOUT = "PTZ[FOCUS OUT]"
PTZ_AUX = "PTZ[AUX]"

ERR_SYSTEM="System Error"
ERR_CAPTURECARD="Capture Card Error"
ERR_AUDIO_DEVICE = "Audio Device Error"
ERR_STORAGE="Storage Error"
ERR_SOUND_DEVICE = "Sound Output Device Error"
ERR_GRAPHICDEVICE = "Graphic Device Error"
ERR_CODEC_INIT="Video Compress Initial Error"
ERR_CLIENT = "Client Error"
ERR_SOCKET = "Socket Error"
ERR_SERIALDEVICE = "Serial Device Error"
ERR_PTZ = "PTZ Error"
ERR_ETC = "Etc. Error"
ERR_STORAGE = "STORAGE ERROR"
ERR_STORAGE_NOT_FOUND = "-NOT FOUND"
ERR_DMAPFILE = "-DMAPFILE"
ERR_DATFILE = "-DATFILE"

LIST_TIME_COLUMN = "Time"
LIST_EVENT_COLUMN = "Object"
LIST_DESCP_COLUMN = "Description"

TODAY_EVENT = "Today Event"
DAYUNIT_EVENT ="Day unit Event"
SEARCH_EVENT ="Search special Event"

USE_PERIOD = "Use Period"
DATE_PERIOD ="Date Preiod"
SORT_BY_OBJECT ="DVR Object :"
SORT_BY_OPERATION ="DVR Operation :"
OK="OK"
CANCEL="CANCEL"

[SETUP]
OK="OK"
CANCEL="CANCEL"
APPLY = "APPLY"

;Setup General Page
SETUP_GENERAL = "General"
INPUT_SIGNAL = "Input Signal"
DISPLAY_DEVICE = "Display Device"
RECORD_COMPRESSOR_TYPE = "Video Record Compressor"
VIN_METHOD =" Video Input Method"
CON_METHOD = "Connection Method"
COMMUNICATION = "Communication"
USE_TCPIP = "Use TCP/IP"
TCPIP_PORTSETTING = "Port Setting"
TCPIP_PORTCHANGE = "Change Port"
USE_SERIAL = "Use Serial Device"
USE_MODEM = "Is Modem Device"
TRANS_RATE = "Transfer Rate"
SAVE_QUALITY = "Save Image Quality"
COMPRESS_LOW = "Low Quality"
COMPRESS_HIGH = "High Quality"
COMPRESS_RATE = "Image Quality"
KEYFRAME_TERM = "Key Frame Term"
KEYFRAME_FRAME = "Frame"
COM_PORT = "Communication Port"
FONT = "Font"
FONT_CHANGE = "Font Setup"
FONT_NAME ="Microsoft sans Serif"
PTZ_SETUP = "PTZ Setup"
PTZ_PORT = "PTZ Port"
PTZ_PORTSETTING = "Port Detial Setting"
RS_485_PARITYBIT= "ParityBit"
SITE_NAME = "Site Name :"
SITE_NAME_APPLY = "Apply"
USE_PASSWD = "Use Password"
CHECK_REBOOT = "Check Daily Reboot"
USE_FULL_SCREEN = "Use Full Screen Mode"
REGISTER_WINDOW_SHELL = "Register Window Shell"
UPDATESHELL_REBOOT = "Update Windows Shell, System reboot!"

DEFAULT_CAM_NAME="Camera #"
DEFAULT_SENSOR_NAME ="Sensor #"
CURRENT_FONT="Selected Font"
ALREADY_EXIST="Identical Name Already Exists"

CHANGE_MODE ="Change display mode. System reboot now."
FAIL_CHANGE_MODE ="Fail to change display mode."

CREATE ="Create / Add"
DELETE ="Delete"
START ="Run"
LIST_DRIVE ="Drive stage list"
DRIVE_NAME ="Drive"
NUM_STORAGE ="Total Stage"
MANAGER_USER="User Add/Del"
LIST_USER="User List"
ERR_VERIFY_IDPASS = "User ID consist of 32 character. User password consists of 5 - 8 character. Not allow specific character"
NEW_ID="New ID :"
NEW_PASSWD="New Password :"
IDENTYFY_PASSWD="Confirm Password :"

ADD_USER="Add General User"
DEL_USER="Delete user"
MODY_IDPASS="Change Administer/User ID and Password"
PRIVILIGE_SETUP = "Privilege Setup"
DVR_RUN_EXIT	= "DVR Run / Exit"
RUN_SETUP	= "Run Setup"
RUN_SEARCH = "Run Search"
ACCESS_REMOTE = "Access Remote"
MULTIPLE_ACCESS = "Allow multiple access"
CAMERA_RESTRICTION = "Camera restriction"

FIND_MODEM = "Find Modem"
START_MODEM_FIND = "Start to find Modem Device"
SUCESS_MODEM_FIND = "Success to find Modem Device."
FAIL_MODEM_FIND = "Fail to find Modem Device"
SCANING_MODEM_FIND = "Com Port Scanning : "
CHECK_WEBSERVER = "Web Registration"
REGISTER_WEB = "Register Web Server"
WEBSERVER_NAME = "Web Server :  http://"
WEBSERVER_REGISTER = "Register"
IP_CONFIGURE = "IP Configuration"
UPDATE_REGISTER_WEB = "Update Web Server registration"
REGISTER_WEB_OK = "Success to register Web Server"
REGISTER_WEB_FAIL = "The site name is already registered!"
REGISTER_WEB_FAIL2 = "Fail! Unknown Message received. Please Check Web server address"
REGISTER_WEB_FAIL3 = "Fail! WebServer loss connection. Please Check Web server address"
ERR_MAINPORT_OPEN = "Fail to open main port!"
ERR_SECONDPORT_OPEN = "Fail to open auxiliary(audio) port!"
USE_HTTPSERVER = "Use Web cam Server"
HTTPSERVER_CONFIG = "Web cam Server Property"
HTTPSERVER_PORT = "Web Cam Server Port"
HTTPSERVER_FRAMERATE = "Web Cam Server FPS"


;Sensor / Alarm Page
SETUP_SENSOR_ALARM =Sensor / Alarm
CANCEL_ALL =Cancel All Selected
CHANGE_SENSOR_NAME = Change Sensor Name

CAMERA="Camera"
SENSOR="Sensor"
ALARM="Alarm"
PRESET="Preset"
LIGHT = "Light"
USER_OPERATION = "User Operation"
DIGITALOUT_DURATION = "Digtial Out Duration"
USE_DIGITALOUT_DURATION = "Use DigitalOut Duration"
SENSOR_NORMAL_CLOSE = "Sensor N/C"
SENSOR_NORMAL_OPEN = "Sensor N/O"


;Camera / Motion Page
SETUP_CAM_MOTION =Camera / Motion Detection
DUPLICATE_CAMNAME =Duplicated Camera Name Exists, current name will not be saved
INPUT_CAM_NAME =Please Input Camera Name

BRIGHTNESS =Brightness
HUE =Hue
CONTRAST =Contrast
SATURATION =Saturation
CAM_SETUP =Camera Setup
MOTION_SETUP =Motion Setup
OVERLAY_SETUP = Overlay Setup
CHANGE_DETECT_POINT=Change Detecting Point
ALL_SAME =All The Same
ALL_AREA =Select All Area
SET_CAM_NAME =Camera Name
DETAIL =Detail
PTZ_SETUP_TEST =PTZ Setup & Test
CAM =Cam#
DEFAULT_COLOR = All color default
CAMERA_DISCONNECT = "Disconnect"
CAMERA_DONTDISPLAY = "Don't Display"
MOTION_DETECTION = "Motion Detection"
MOTION_DETECTING = "Detecting motion"
PTZ RECEIVER = "PTZ Receiver"
SENSITIVE = Sensitive
DULL = Dull
DETECT_SENSIBLITY = Detection Sensitivity

;Schedule Page
SCHEDULE =Schedule
ALL_SETUP_SAME =All The Same Setup

HOURS   ="Hours"
MONDAY	="Mon."
TUESDAY="Tues."
WEDNESDAY ="Wednes."
THURSDAY ="Thurs."
FRIDAY	="Fri."
SATURDAY ="Satur."
SUNDAY	="Sun."
HOLIDAY	="Holi."
	
P4_ONTIME="On-Time (T)"
P4_SENSOR="Sensor (S)"
P4_MOTION="Motion Detection (M)"
P4_AUDIO= "Audio Record (A)"
NOT_SAVE = "Monitor"

;Schedule Detial Page
SETUP_HOLIDAY =Recording frame / Holiday
FPS="Fps"

SET_HOLIDAY ="Holiday Registration"
HOLIDAY =Holiday
HOLIDAY_REG = Holiday Register
MON = Month
DAY = Day
SEC = Sec
MIN = Minute
ADD_HOLIDAY = Register Holiday
DEL_HOLIDAY = Delete Holiday
SETUP_MOTION = Motion Save Setup
BEEP_MOTION = Alarm in Detection
MIN_SAVE_TERM = "Post alarm Interval"
FRAME_SPEED = Recording Speed
TIME_SAVE = On Time Save Setup
BEEP_SAVE = Beep In Save
TIME_INTEVAL ="Recording Interval between Frames"
SETUP_SENSOR = Sensor Save Setup
SENSOR_INTEVAL = "Post Alarm Interval"
BEEP_SENSOR = Alarm When Signal Input

PRESAVE_INTEVAL = "Event Previous Recording Interval Term"
EVENTRECORD_SETTING = "Event Record Setting"

NOR_RECORD_NAME = Apply Normal Recording
MUL_RECORD_NAME = Apply Multiple Recording
ALEADY_HOLIDAY = "Already Exist"

;Storage Media Page
SETUP_STORAGE = Storage Space
SELECT_DRIVE = Drive Select
FREE_SPACE = "Free Space / Data Space"
STOR_SLID_TEXT = "DVR data space / Total available space"
STORAGE_SPACE = Total Storage Space
EMPTY_SPACE = Empty Space (Usable)
STATE_SELECT_DRIVE = Selected Status Over View
DEFAULT = Default
MAKE_STORAGE = Make Storage Media
FINISH_JOB = Job Finish.
NO_SELECT_DRIVE = No select drive.
GRID_DRIVE = "Drive"
GRID_TOTAL_SPACE = "Total Drive Space"
GRID_FREE_SPACE = "Free Drive Space"
GRID_DATA_SPACE = "Data Drive Space"
GRID_DRIVE_CHECK = "Select"
GROUP_NOTICE = "Notice"
STORAGE_NOTICE = "Select, want to store drive where selection check X ,and Create Storage Space. When the store medium is not creating, DVR dosen't execute"

ERR_SAVE_SYSTEM_DISK =The smallest Free space of System is 320MB. Empty storage!
ERR_SPACE_FEEK =Shortage of storage
ERR_DISK_SPACE =Shortage of storage! The very first free Space of system is 320MB. Save this state?
ERR_SPACE_ERROR =Error of storage
ERR_SAVE_DISK = The smallest Free space of System is 96MB. Empty storage!

CHART_TITLE = "Drive Space Status : "
APP_SPACE = "Application Space"
SAVED_DATA = "Already created Data Space"
AVALIABLE_DATA = "Able to create Data Space"
RESERVE_FREE = "Reserved User Free Space"

WARNING_NETDRIVE = "Warning!. If fail network, lost record data. Continue?"
WARNING_CDROM = "Warning!. It's very sensitive to record media. Only support CDRW and Direct acess mode.  Continue?"
WARNING_REMOVABLE = "Warning!. When to record, media must to exist.  Continue?"

;Misc Page
SETUP_ETC = "ETC.. (Line monitor / Alert mode)"
USE_LINE_MONITOR= Using Line Monitor
CHANNEL_SWITCH_ORDER = Order of Channel Switching
CHANNEL_SWITCH_TERM = Channel switching interval
SECOND = Sec.
USE_ALERT = Using Alert Mode
ALERT_STATE = Alert State
IN_SENSOR = In Sensor
DETECT_MOTION = In Motion Detection
CAMERA_LOSS = "Camera Loss"
AUTO_RELEASE_ALERT = "Auto Release Alert Event"
SOUND_SETTING = "Sound Setting"
SPECIFIC_TIME =In Specific Time
IP_ADDRESS = IP Address
TEL = Tel.
CONNECT_ADDRESS = Connect to Host Program
MAIL_PROPERTY = "e-mail Property"
MAIL_SERVER = Out going Mail Server
MAIL_FROM = From e-mail address
MAIL_TO = To e-mail address
NOTIFY_EMAIL = Notify E-Mail
MAIL_DETAIL_SETUP = "Mail Detail Setup"
USE MAIL SERVER = "Use Mail SMTP Server"
USE MAIL AUTHORIZATION = "Use User Authorization"
MAIL ID = "ID"
MAIL PASSWORD = "Password"
MAIL SERVICE INTERVAL = "Mail Service Interval"
USE_TIME_PERIOD = "Use Time Period"

;Audio Page
SETUP_AUDIO_PAGE = "Audio"
DEFAULT_AUDIO_NAME = "Audio"
AUDIO_MATCH_CAMERA = "Match Camera Channel :"
AUDIO_SETTING = "Audio Setting"
AUDIO_VOLUM = "Volume"
AUDIO_VOLUM_HIGH = "High"
AUDIO_VOLUM_LOW = "Low"
AUDIO_TEST = "Audio Test"
SETUP_AUDIO_DETECT = "Setup Audio Detection"
AUDIO_TIME_SAVE = "Setup Audio Time Save"
AUDIO_SESIBILITY = "Audio Detection Sensitivity"
AUDIO_RECORD_METHOD = "Recording Method"
AUDIO_NOTUSE = "Not Use"
ALWAYS_RECORD_AUDIO = "Always Record Audio"

;etc
PAGE1_INTRO= This session is to create, add, delete new storage media.  If you select delete, you'll loose all image data.
PAGE2_ADD_WARNING= Add or create storage media. If free space in drive is less than the space being setup, the process cannot be done.
PAGE2_DELETE_WARNING= Delete storage media in selected drive.
PAGE3_CREATE_END= Finished creating storage media.  If you want to check the storage media, use Windows Explorer, and browse DATA directory.
PAGE3_DELETE_END= Finished deleting storage media.  If you want to check the storage media, use Windows Explorer, and browse DATA directory.  

[SEARCH]
LOCAL_VIEWER_NAME="LOCALVIEWER"

TITLE_CURRENT_SITE="Local Site"
TITLE_DEFAULT_CAM_NAME="Cam #"

SELECT_FOLDER="Select folder to search..."
PRINTER_NONE="No printer defined!"
PRINTER_PREVIEW="Print Preview"

BACKUP_DIALOG="Backup"
BACKUP_CLOSE="Close?"

BACKUP_SAVE_DRV="Selected drive :"
BACKUP_START="Start"
BACKUP_END="Exit"
BACKUP_STOP="Stop"
BACKUP_INFO1="Select backup range and drive. Then click 'Start' button."
BACKUP_INFO2="If you want to stop backup, click 'Stop' button."
BACKUP_INFO3="Backup finished."

BACKUP_CODEC="Default Codec"
BACKUP_QUALITY = "Quality : "
BACKUP_MSG_SELECT_TIME ="Last time not selected!"
BACKUP_MSG_SELECT_PATH ="Backup file path not selected!"
BACKUP_MSG_STOP ="Stop process ?"
BACKUP_MSG_OVERWRITE ="Overwrite backup file?"
BACKUP_MSG_CODEC ="Change compress codec ?"

TOOLTIP_BUTTON_MAIN_HIDE="Minimize Application"
TOOLTIP_BUTTON_MAIN_POWER="Close Application"
TOOLTIP_BUTTON_MAIN_EXIT="Exit Application"

TOOLTIP_BUTTON_MAIN_CALENDAR_YEARLEFT="Year Minus"
TOOLTIP_BUTTON_MAIN_CALENDAR_YEARRIGHT="Year Plus"
TOOLTIP_BUTTON_MAIN_CALENDAR_MONTHLEFT="Month Minus"
TOOLTIP_BUTTON_MAIN_CALENDAR_MONTHRIGHT="Month Plus"

TOOLTIP_BUTTON_MAIN_DATESET="Set Date"

TOOLTIP_BUTTON_MAIN_SLIDER_LEFT="Plus"
TOOLTIP_BUTTON_MAIN_SLIDER_RIGHT="Minus"

TOOLTIP_BUTTON_PLAY_BACKFF="Fast Backward"
TOOLTIP_BUTTON_PLAY_BACKPLAY="Backward"
TOOLTIP_BUTTON_PLAY_BACKFIRST="First"
TOOLTIP_BUTTON_PLAY_BACKFRAME="Prev"
TOOLTIP_BUTTON_PLAY_STOP="Stop"
TOOLTIP_BUTTON_PLAY_PLAY="Play"
TOOLTIP_BUTTON_PLAY_PLAYFF="Fast Forward"
TOOLTIP_BUTTON_PLAY_PLAYFRAME="Next"
TOOLTIP_BUTTON_PLAY_PLAYLAST="Last"

TOOLTIP_BUTTON_EFFECT_SLIDER_PLUS="Plus"
TOOLTIP_BUTTON_EFFECT_SLIDER_MINUS="Minus"

TOOLTIP_BUTTON_EFCT_ZOOM="Zoom"
TOOLTIP_BUTTON_EFCT_BRIGHT="Bright"
TOOLTIP_BUTTON_EFCT_BACKLITE="Backlight"
TOOLTIP_BUTTON_EFCT_SENSITIVE="Sensitive"
TOOLTIP_BUTTON_EFCT_COLOR="Color"

TOOLTIP_BUTTON_MODE_1="1"
TOOLTIP_BUTTON_MODE_4="4"
TOOLTIP_BUTTON_MODE_9="9"
TOOLTIP_BUTTON_MODE_16="16"

TOOLTIP_BUTTON_MODE_FULL="Full screen"
TOOLTIP_BUTTON_MODE_4A="1~4"
TOOLTIP_BUTTON_MODE_4B="5~8"
TOOLTIP_BUTTON_MODE_4C="9~12"
TOOLTIP_BUTTON_MODE_4D="13~16"

TOOLTIP_BUTTON_MODE_9A="1~9"
TOOLTIP_BUTTON_MODE_9B="8~16"

TOOLTIP_BUTTON_MODE_LEFT="Mode Left"
TOOLTIP_BUTTON_MODE_RIGHT="Mode Right"

TOOLTIP_BUTTON_FUNC_SAVE="Save"
TOOLTIP_BUTTON_FUNC_MOTION="Motion"
TOOLTIP_BUTTON_FUNC_PRINT="Print"
TOOLTIP_BUTTON_FUNC_BACKUP="Backup"

TOOLTIP_BUTTON_FUNC_EVENT="Event List"
TOOLTIP_BUTTON_FUNC_BACKUPVIEW="Backup Viewer"

TOOLTIP_BUTTON_CAM_LEFT0="1"
TOOLTIP_BUTTON_CAM_LEFT1="2"
TOOLTIP_BUTTON_CAM_LEFT2="3"
TOOLTIP_BUTTON_CAM_LEFT3="4"
TOOLTIP_BUTTON_CAM_LEFT4="5"
TOOLTIP_BUTTON_CAM_LEFT5="6"
TOOLTIP_BUTTON_CAM_LEFT6="7"
TOOLTIP_BUTTON_CAM_LEFT7="8"
TOOLTIP_BUTTON_CAM_LEFT8="9"
TOOLTIP_BUTTON_CAM_LEFT9="10"
TOOLTIP_BUTTON_CAM_LEFT10="11"
TOOLTIP_BUTTON_CAM_LEFT11="12"
TOOLTIP_BUTTON_CAM_LEFT12="13"
TOOLTIP_BUTTON_CAM_LEFT13="14"
TOOLTIP_BUTTON_CAM_LEFT14="15"
TOOLTIP_BUTTON_CAM_LEFT15="16"

TOOLTIP_BUTTON_CAM_MODE0="1"
TOOLTIP_BUTTON_CAM_MODE1="2"
TOOLTIP_BUTTON_CAM_MODE2="3"
TOOLTIP_BUTTON_CAM_MODE3="4"
TOOLTIP_BUTTON_CAM_MODE4="5"
TOOLTIP_BUTTON_CAM_MODE5="6"
TOOLTIP_BUTTON_CAM_MODE6="7"
TOOLTIP_BUTTON_CAM_MODE7="8"
TOOLTIP_BUTTON_CAM_MODE8="9"
TOOLTIP_BUTTON_CAM_MODE9="10"
TOOLTIP_BUTTON_CAM_MODE10="11"
TOOLTIP_BUTTON_CAM_MODE11="12"
TOOLTIP_BUTTON_CAM_MODE12="13"
TOOLTIP_BUTTON_CAM_MODE13="14"
TOOLTIP_BUTTON_CAM_MODE14="15"
TOOLTIP_BUTTON_CAM_MODE15="16"

TOOLTIP_BUTTON_TIME0="0"
TOOLTIP_BUTTON_TIME1="1"
TOOLTIP_BUTTON_TIME2="2"
TOOLTIP_BUTTON_TIME3="3"
TOOLTIP_BUTTON_TIME4="4"
TOOLTIP_BUTTON_TIME5="5"
TOOLTIP_BUTTON_TIME6="6"
TOOLTIP_BUTTON_TIME7="7"
TOOLTIP_BUTTON_TIME8="8"
TOOLTIP_BUTTON_TIME9="9"
TOOLTIP_BUTTON_TIME10="10"
TOOLTIP_BUTTON_TIME11="11"
TOOLTIP_BUTTON_TIME12="12"
TOOLTIP_BUTTON_TIME13="13"
TOOLTIP_BUTTON_TIME14="14"
TOOLTIP_BUTTON_TIME15="15"
TOOLTIP_BUTTON_TIME16="16"
TOOLTIP_BUTTON_TIME17="17"
TOOLTIP_BUTTON_TIME18="18"
TOOLTIP_BUTTON_TIME19="19"
TOOLTIP_BUTTON_TIME20="20"
TOOLTIP_BUTTON_TIME21="21"
TOOLTIP_BUTTON_TIME22="22"
TOOLTIP_BUTTON_TIME23="23"

TOOLTIP_BUTTON_CAM_LEFT="Left"
TOOLTIP_BUTTON_CAM_MODE="Mode"