10/100 FastEthernet PC Card Driver for lna-100n2 model
after RedHat 7.0 or Kernel 2.4.0 Installation How-to:
This card uses the default drivers provided in RedHat 7.0 or Kernel 2.4.0 and no
additional drivers are needed. Please setup the TCP/IP or DHCP according to your needs.
If you can't perform the PING function, please follow the steps below:
1. In /etc/pcmcia/config file modify following lines
Existing lines in document->
device "pcnet_cs"
class "network" module "net/8390, "pcnet_cs"
Add three lines->
card "Billionton LNA-100B"
version "Billionton", "LNA-100B"
bind "pcnet_cs"
2. Restart the cardmgr-
"/etc/rc.d/init.d/pcmcia restart"
Note: If the following error message ("unable to read hardware net address for io bass 0X300") shows up when you insert the card, that means the card is not supported after 2.2.16-22. The source codes can be found in the Linux folder.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.