1. riovolt_sp250_100-firmware.zip Driver
2. playlist.txt File Contents

playlist.txt Driver File Contents (riovolt_sp250_100-firmware.zip)

Playlist support for the RioVolt portable MP3/WMA CD player.

We support playlists created with the Winamp (http://www.winamp.com) software.  Other software may be used to create playlists, but we will only support those made with Winamp.  Winamp is a free program and may be downloaded from the link above.

Creating a Playlist:  This is the supported method of creating a playlist.  Playlists made any other way might work, but if you run into difficulties, please follow these directions:

1) Create a folder into which you will copy all of the tracks you will burn to the CD.  For simplicity, we’ll call the folder “Volt” and put it on the root of the C:/ drive (C:\Volt).
2) Copy all of the tracks you want to burn onto the CD into this new folder (C:\Volt).  You may use sub-folders if you wish to keep tracks separated by album, artist, genre, etc.
3) Run Winamp and create a playlist using the tracks from C:\Volt, and be sure to save the playlist in the C:\Volt folder.  This is very important.  The tracks and the playlists must be in the same folder.  Please note – we do not support the actual Winamp software, and you will need to use the help menus in the software for assistance in creating playlists.
4) You may use multiple playlists, just repeat step 3 for each one.
5) Burn the contents of the C:\Volt folder the root of your CD.  Ensure that the file structure within the C:\Volt folder remains intact.

Running a Playlist:

1) Put your CD in the RioVolt and turn on the player.
2) The RioVolt will begin playing the first track on the CD.  Press the joypad down to stop laying the track.
3) Press the PROG button on the player.  The first option is PROGRAM, which you would use to program a playlist on the RioVolt.  Below PROGRAM, you will see the playlists that are burnt onto the CD.  Use the joypad to select the playlist you wish to activate, then press the right arrow (FF) on the joypad to activate it.  The RioVolt will load up the information from the playlist and begin playing.