; Installation inf for the RK28USB Device
;
; (c) Copyright 2008 FuZhou Rockchip
;
;
; 1.00.1001 ÐÞ¸ÄÁËWriteµÄ³¬Ê±Ê±¼ä£¬(200ms => 2000ms)
;--------- Version Section ---------------------------------------------------
[Version]
Signature="$CHICAGO$"
Class=RK28USB
ClassGUID={79DFC2A8-2574-493C-AE71-52958E41AA67}
Provider=%Provider%
DriverVer=04/08/2009,1.00.1003
;CatalogFile=RK28USB.cat
[ControlFlags]
; Pnp drivers should not be installable via non-PnP hardware dialogs
ExcludeFromSelect = *
;--------- ClassInstall/ClassInstall32 Section -------------------------------
; Not necessary if using a standard class
; 9X Style
[ClassInstall]
Addreg=RK28USBClassAddReg
; NT Style
[ClassInstall32]
Addreg=RK28USBClassAddReg
[RK28USBClassAddReg]
;reg-root,[subkey],[value-entry-name],[flags],[value]
HKR,,,%REG_SZ%,%DeviceClassName%
HKR,,Icon,,"1"
HKR,,DeviceCharacteristics,%REG_DWORD%,0x100 ; FILE_DEVICE_SECURE_OPEN
HKR,,Security,,"D:P(A;;GR;;;WD)(A;;GA;;;SY)(A;;GA;;;BA)" ; generic read - everybody
; generic all access - system and admin
;--------- DestinationDirs Section -------------------------------------------
[DestinationDirs]
DefaultDestDir = 10
RK28USB_Files_Driver = 12
;--------- SourceDiskNames and SourceDiskFiles Section -----------------------
; These sections identify source disks and files for installation.
[SourceDisksNames]
1 = %DiskId1%,,,""
[SourceDisksFiles]
rk28usb.sys = 1,,
;--------- Manufacturer and Models Sections ----------------------------------
[Manufacturer]
%MfgName% = RK28USB_Mfg,NTx86,NTia64, NTamd64
[RK28USB_Mfg]
; DisplayName Section DeviceId
%RK28USB_DeviceDesc%=RK28USB_DDI, USB\VID_071b&PID_3228
[RK28USB_Mfg.NTx86]
%RK28USB_DeviceDesc%=RK28USB_DDI, USB\VID_071b&PID_3228
[RK28USB_Mfg.NTia64]
%RK28USB_DeviceDesc%=RK28USB_DDI, USB\VID_071b&PID_3228
[RK28USB_Mfg.NTamd64]
%RK28USB_DeviceDesc%=RK28USB_DDI, USB\VID_071b&PID_3228
;---------- DDInstall Sections -----------------------------------------------
; --------- Windows 98 -----------------
; Experimentation has shown that DDInstall root names greater than 19 characters
; cause problems in Windows 98
[RK28USB_DDI]
CopyFiles=RK28USB_Files_Driver
AddReg=RK28USB_9X_AddReg
[RK28USB_9X_AddReg]
HKR,,DevLoader,,*ntkern
HKR,,NTMPDriver,,rk28usb.sys
HKR,,Description,,%RK28USB_DeviceDesc%
; --------- Windows NT -----------------
[RK28USB_DDI.NT]
CopyFiles=RK28USB_Files_Driver
AddReg=RK28USB_NT_AddReg
[RK28USB_DDI.NT.Services]
Addservice = RK28USB, %FLG_ADDREG_NOCLOBBER%, RK28USB_Service
; --------- Registry ----------------------
[RK28USB_NT_AddReg]
;reg-root,[subkey],[value-entry-name],[flags],[value]
HKR,rockchip,Key0,%REG_DWORD%,0
; --------- Service ----------------------
[RK28USB_Service]
DisplayName = %RK28USB_SvcDesc%
ServiceType = %SERVICE_KERNEL_DRIVER%
StartType = %SERVICE_DEMAND_START%
ErrorControl = %SERVICE_ERROR_NORMAL%
ServiceBinary = %12%\rk28usb.sys
LoadOrderGroup = Extended Base
; --------- Files ----------------------
[RK28USB_Files_Driver]
rk28usb.sys,,,2
;--------- Strings Section ---------------------------------------------------
[Strings]
Provider = "Fuzhou Rockchip"
MfgName = "Fuzhou Rockchip"
RK28USB_DeviceDesc = "RK28USB Device"
DeviceClassName="Class for RK28USB devices"
RK28USB_SvcDesc = "Driver for RK28USB Device"
DiskId1 = "RK28USB Device Installation Disk #1"
REG_SZ = 0x00000000
REG_MULTI_SZ = 0x00010000
REG_EXPAND_SZ = 0x00020000
REG_BINARY = 0x00000001
REG_DWORD = 0x00010001
REG_NONE = 0x00020001
SERVICE_KERNEL_DRIVER = 0x00000001
SERVICE_FILE_SYSTEM_DRIVER = 0x00000002
SERVICE_ADAPTER = 0x00000004
SERVICE_RECOGNIZER_DRIVER = 0x00000008
SERVICE_BOOT_START = 0x0
SERVICE_SYSTEM_START = 0x1
SERVICE_AUTO_START = 0x2
SERVICE_DEMAND_START = 0x3
SERVICE_DISABLED = 0x4
SERVICE_ERROR_IGNORE = 0x00000000
SERVICE_ERROR_NORMAL = 0x00000001
SERVICE_ERROR_SEVERE = 0x00000002
SERVICE_ERROR_CRITICAL = 0x00000003
FLG_ADDREG_NOCLOBBER = 0x00000002
FLG_ADDREG_DELVAL = 0x00000004
FLG_ADDREG_APPEND = 0x00000008
FLG_ADDREG_KEYONLY = 0x00000010
FLG_ADDREG_OVERWRITEONLY = 0x00000020
FLG_ADDREG_64BITKEY = 0x00001000
FLG_ADDREG_KEYONLY_COMMON = 0x00002000
FLG_ADDREG_32BITKEY = 0x00004000
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.