JMB36X RAID Driver Release Note
---------------------------------------------------------------------------------------------------------------------------------
R1.17.07WHQL (11/28/06')
- Note
- ABIT subsystem vendor ID 0x1082147B was added in inf.
- Changing the disk reporting sequence for Vista. After changing, the scenario should be as followings.
1. Install Vista with a mirror RAID of hard disk A and B.
2. Revert A to non-RAID disk in BIOS.
3. Booting with both A and B connected.
4. Booting with B alone will succeed.
5. Booting with A alone will fail.
- The setup program will overwrite all installed files and start menu items with the newly installed files and items.
(Eg, If the user has installed Gigabyte package first and now install JMicron Package, the setup program will overwrite all Gigabyte files and items with newly installed JMicron package.)
---------------------------------------------------------------------------------------------------------------------------------
R1.17.06WHQL (11/08/06')
- Note
- Add a dialog box for user to select to replace MS MS standard IDE driver with our JMicron driver when detecting single IDE.
(Silent mode will not show this dialog, always install JMicron driver)
- Provide IDE setup program that is embeded in our current JMB36X setup program.
(When setup program detect single IDE controller, it will show a wizard dialog for user to select IDE driver or JMicron SCSI driver.
In other cases (NOT single IDE controller), the wizard dialog will not appear. In silent install mode,
the default is to install JMicron driver for single IDE controller.)
- After installing JMicron SCSI WHQL driver under single mode, users change to Multi-function mode. A program will automatically be launched to detect
if multi-IDE mode is installed with JMicron SCSI driver. If yes, it will call another program to install standard IDE driver.
- Adding JMB369 device ID in jmide.inf.
- MSI subsystem vendor ID 0x72381462 was added in inf.
- Issue Correction
- JM20336 enclosure failed to be detected.
- SATA detection failed sometimes.
- Fix the issues of installing IDE driver when install multi-function mode under win2000/winXP/win2003 Server 32Bit
---------------------------------------------------------------------------------------------------------------------------------
R1.17.05 (10/17/06')
- Issue Correction
- A RAID including 2 IDE HDDs failed in formating.
- It needs more than 2 minutes to resume from hibernation on some platforms.
---------------------------------------------------------------------------------------------------------------------------------
R1.17.04 (10/12/06')
- Note
- MSI subsystem vendor ID 0x72351462 was added in inf.
- Issue Correction
- Failed to burn DVD-RW format.
---------------------------------------------------------------------------------------------------------------------------------
R1.17.03WHQL (10/09/06')
- Note
- Internal revision is R1.17.03.02.
- This revision is a logo driver of Win2000, WinXP 32/64, Win2003 32/64, Vista 32/64.
- ASUS subsystem vendor ID 0x824F1043 was added in inf.
---------------------------------------------------------------------------------------------------------------------------------
R1.17.02 (09/26/06')
- Issue Correction
- SCSI compliance test of DTM failed.
- Fail to install driver on Vista x64 platform.
---------------------------------------------------------------------------------------------------------------------------------
R1.17.01 (09/22/06')
- Note
- Driver is the same as R1.17.00.
- Issue Correction
- In multi-function mode, istalling driver on Vista x32 failed.
---------------------------------------------------------------------------------------------------------------------------------
R1.17.00 (09/20/06')
- Note
- New UI of RAID AP.
- Can install on Windows Vista 32/64.
- Modify readme.txt.
- Add Foxconn subsystem vendor ID 0x0D08105D.
- Issue Correction
- JM20336 enclosure HDD power is on/off several times when enclosure power button is turned on.
- ATAPI device (CDROM/DVDROM) doesn't show in "Safely Remove Hardware" list.
- The "open/close disc" button of WinDVD doesn't work.
---------------------------------------------------------------------------------------------------------------------------------
R1.16.02WHQL (09/06/06')
- Note
- Only setup AP changed. Driver is the same as R1.16.01.
---------------------------------------------------------------------------------------------------------------------------------
R1.16.01 (08/23/06')
- Issue Correction
- Formatting RAID failed in some cases.
- Note
- Adding ECS subsystem/vendor ID E0291631/E02A1631.
---------------------------------------------------------------------------------------------------------------------------------
R1.16.00 (08/18/06')
- Note
- Adding silent install.
- Reduce the CPU utilization and improve the performance.
---------------------------------------------------------------------------------------------------------------------------------
R1.15.02aWHQL (08/30/06')
- Note
- It's a special revision for ASUS notebook.
---------------------------------------------------------------------------------------------------------------------------------
R1.15.02WHQL (08/30/06')
- Note
- Only setup AP changed. Driver is the same as R1.15.01.
---------------------------------------------------------------------------------------------------------------------------------
R1.15.01 (08/10/06')
- Issue Correction
- The burst performance of HdTach of 3G HDD exceeds 2.5G.
---------------------------------------------------------------------------------------------------------------------------------
R1.15.00 (08/09/06')
- Issue Correction
- The resuming time of S1/S3 is too long. (Penalty is IDE device can't be plugged in/out in sleeping mode.)
- The HdTach burst performance of SATA 1.5G HDD is not reasonable after hot plug.
- Note
- Porting from R1.12.07 : To w/r ASUS DVD ROM issue (DVD ROM disappears in the process of copying data).
---------------------------------------------------------------------------------------------------------------------------------
R1.14.00c (07/25/06')
- Note
- W/r express card hot-plug issue of chip rev.2. (like R1.08.00c)
---------------------------------------------------------------------------------------------------------------------------------
R1.14.00 (07/24/06')
- Request
- Adding one special case for JMB360 to support PMP RAID.
- Adding JMB362 chip ID in miniport driver.
- Adding ASUS subsystem/vendor ID 824C1043.
---------------------------------------------------------------------------------------------------------------------------------
R1.13.07 (07/20/06')
- Request
- To w/r h/w issue that sometimes SATA connection failed after S3/hot plug/power off.
---------------------------------------------------------------------------------------------------------------------------------
R1.13.06 (07/18/06')
- Issue Correction
- IDE HDD will be lost when resuming from S3 in 64-bit OS.
---------------------------------------------------------------------------------------------------------------------------------
R1.13.05 (07/12/06')
- Note
- Only AP changed. Driver is the same as R1.13.04.
---------------------------------------------------------------------------------------------------------------------------------
R1.13.04 (07/11/06')
- Request
- AP show disk capacity to 4 decimal digits.
---------------------------------------------------------------------------------------------------------------------------------
R1.13.03 (07/07/06')
- Note
- Enable RAID AP for JMB360.
- Change "JMicron RAID" string into "JMB36x RAID" to avoid the patent issue.
---------------------------------------------------------------------------------------------------------------------------------
R1.13.02 (07/04/06')
- Request
- Show warning message when hot plug happens.
---------------------------------------------------------------------------------------------------------------------------------
R1.13.01 (06/30/06')
- Note
- Porting following items from R1.11.02.
- [ASUS] In multi-AHCI mode and OS is in JMB36x PATA HDD, uninstalling driver makes the system unbootable.
- Porting following items from R1.12.03.
- Eanbling RAID function in single AHCI mode for JMB36x add-on card.
- W/r the issue that the system failed to resume from S3 when OS is in IDE HDD.
- To be able to mix PATA, SATA & PMP HDDs to build a RAID.
---------------------------------------------------------------------------------------------------------------------------------
R1.12.07 (08/04/06')
- Note
- To w/r ASUS DVD ROM issue (DVD ROM disappears in the process of copying data).
---------------------------------------------------------------------------------------------------------------------------------
R1.12.06 (07/30/06')
- Note
- Porting from R1.13.06 to w/r the issue that IDE HDD will be lost when resuming from S3 in 64-bit OS.
---------------------------------------------------------------------------------------------------------------------------------
R1.12.05 /(07/14/06')
- Issue Correction
- resume from S3 when OS is in IDE HDD.
---------------------------------------------------------------------------------------------------------------------------------
R1.12.03 /(06/26/06')
- Request
- Eanbling RAID function in single AHCI mode for JMB36x add-on card.
---------------------------------------------------------------------------------------------------------------------------------
R1.12.02 /(06/22/06')
- Request
- Driver doesn't change class code for JMB360.
---------------------------------------------------------------------------------------------------------------------------------
R1.12.01 /(06/16/06')
- Request
- [ASROCK] Adding subsystem vendor ID 23631849.
---------------------------------------------------------------------------------------------------------------------------------
R1.12.00 /(06/15/06')
- Request
- Adding SCSIOP_IDE_PASS_THROUGH operation code for JMB33x AP.
---------------------------------------------------------------------------------------------------------------------------------
R1.11.00 /(06/12/06')
- Issue Correction
- If changing the HDD channel when system is sleeping, the HDD fails to be detected when system wakes up.
- Failed to detect NEC SATA DVD+/-RW NEC ND-3650A.
---------------------------------------------------------------------------------------------------------------------------------
R1.10.01 / R1.10.01g /(05/29/06')
- Issue Correction
- System crashed after installing driver for JMB360 add-on card.
---------------------------------------------------------------------------------------------------------------------------------
R1.10.00 / R1.10.00g /(05/24/06')
- Request
- Adding single/multi function rules.
----------------------------------------------------------------------------------------------------
v1.09.05
- Issue Fixed: Only modified inf files & txtsetup.oem.
----------------------------------------------------------------------------------------------------
v1.09.04 (WHQL version)
- Issue Fixed: "HCT : Driver Verifier Test" failed.
----------------------------------------------------------------------------------------------------
v1.09.03
- New: Modify some content in oemsetup.txt, inf file and setup program.
----------------------------------------------------------------------------------------------------
v1.09.02
- New: Merging jraid.inf and jahci.inf
----------------------------------------------------------------------------------------------------
v1.09.01
- Issue FIxed: Only modified the setup program for Chinese version
----------------------------------------------------------------------------------------------------
v1.09.00
- New: Support multi-function.
- Issue Fixed: doesn't change class code.
- Issue Fixed: Rebuilding RAID 1 from channel 1 to channel 0 failed.
- Issue Fixed: Some error messages appear when removing driver on Windows server 2003 R2.
- New: Enhance PMP detection when HDDs are connected.
- Issue Fixed: Enable/disable driver makes driver fail to install on JMB360
----------------------------------------------------------------------------------------------------
v1.08.01c (Base on R1.08.00c)
- Issue Fixed: Correcting the issue that system crashed after installing for JMB363 express card on IBM notebook.
----------------------------------------------------------------------------------------------------
v1.08.00c
- New: enhance hot-plug compatibility of Express card of JMB360/363.
- New: change setup program for Express card
----------------------------------------------------------------------------------------------------
v1.08.00
- New: Disable PATA RAID by system BIOS through 4c[4].
- New: add some SSID/SVID for customers
----------------------------------------------------------------------------------------------------
v1.07.01 (WHQL version)
- New: Show 1.5G/3G infomation on the RAID AP
----------------------------------------------------------------------------------------------------
v1.07.00
- Issue Fixed: OS installed in ICH8 disk failed to boot after removing JMB36x software
- Issue Fixed: More than one PMP disk displays in subwindow of AP
- Issue Fixed: Adding ASUS subsystem vendor ID on JMB360
- Issue Fixed: SATA CDROM LTN-48S1S failed to be detected
----------------------------------------------------------------------------------------------------
v1.06.02 (WHQL version)
- Issue Fixed: The RAID still shows not synched after resynching.
----------------------------------------------------------------------------------------------------
v1.06.01
- Issue Fixed: "HCT driver verifier test" failed in 64-bit OS.
- Issue Fixed: "HDTech burst read" is low in first-time test after booting up.
----------------------------------------------------------------------------------------------------
v1.06.00
- Issue Fixed: improve IDE performance on average write test
- Issue Fixed: Not to install RAID AP in JMB360.
----------------------------------------------------------------------------------------------------
v1.05.06
- Issue Fixed: To be able to remove AP even if there is no JMB36x controller.
- Issue Fixed: When booting up, there should be no AP icon in system tray if there is no JMB36x controller.
- Issue Fixed: Burst Performance.
- HDD Patch: FUJITSU MHT2080BH 80G HDD access failed.
- HDD Patch: Seagate ST830011AS HDD has "fail" NCQ behavior.
----------------------------------------------------------------------------------------------------
v1.05.05
- Issue Fixed: partition size is wrong after removing RAID.
- Issue Fixed: partition can't be accessed after removing RAID 0/0+1.
- New: If there is no JMB36x card attached, AP doesn't show any warning message when booting but only show
when user executes it.
----------------------------------------------------------------------------------------------------
v1.05.04
- New: Creating RAID from existing disk for RAID 0/0+1/JBOD.
- New: RAID rebuilding for RAID 0+1.
----------------------------------------------------------------------------------------------------
v1.05.03
- Support: added subsystem ID for customer
- New: To solve special sequence issue on RAID 1 plug.
----------------------------------------------------------------------------------------------------
v1.05.02
- Issue Fixed: Increase the rebuild buffer to 128K to greatly shorten the rebuild time.
- Issue Fixed: Fail to rebuild if the RAID slot index of the source disk is not 0.
- Issue Fixed: To disable rebuilding option when there is only one disk.
----------------------------------------------------------------------------------------------------
v1.05.01
- Issue Fixed: Fix the issue of failing to sleep in S3 on customer platform.
----------------------------------------------------------------------------------------------------
v1.05.00
- Issue Fixed: Removing the pseudo device, thus there is no 2nd installation needed.
----------------------------------------------------------------------------------------------------
v1.04.05 (WHQL version)
- Issue Fixed: Only modify txtsetup.oem.
----------------------------------------------------------------------------------------------------
v1.04.04
- Issue Fixed: Clear HDD data structure when creating RAID.
----------------------------------------------------------------------------------------------------
v1.04.03
- New: show message that the data will be cleared when creating RAID.
¡@- New: show message that the data will be reserved when creating RAID from existing HDD.
----------------------------------------------------------------------------------------------------
v1.04.02
- New: change the default "Yes" to "No" of the pop-up warning dialogue box of removing RAID.
----------------------------------------------------------------------------------------------------
v1.04.01
¡@- New: except the progress bar, also show message of the executing action (rebuilding/resynching).
----------------------------------------------------------------------------------------------------
v1.04.00
- New: Enhance RAID create with the booting system HDD.
----------------------------------------------------------------------------------------------------
v1.03.02
- FIssue Fixecd: Fix RAID 1 re-build on AP.
----------------------------------------------------------------------------------------------------
v1.03.01
- New: Add RAID1 auto-resynching, RAID 1 recovery, creating RAID 1 from existing HDDs
----------------------------------------------------------------------------------------------------
v1.03.00
- Issue Fixed: Only SATA HDD can be removed
- Issue Fixed: Enhance Hot plug issue of single CDROM
----------------------------------------------------------------------------------------------------
v1.02.00
- Issue Fixed: Enhance the IDE performance issue
- Issue Fixed: Enhance HDD identified on specific SATA Port of Port Multiplier (PM) that is 1-to-5 port
- New: Disable "create RAID" function when there is only one HDD connected
- New: Disable RAID 0+1 option when the connected HDDs is less than 4
----------------------------------------------------------------------------------------------------
v1.01.00
- Issue Fixed: Enhance the hot-plug issue
----------------------------------------------------------------------------------------------------
v1.00.00 (WHQL version)
- Issue Fixed: RAID rebuild : finished, about 100G bytes per hour
- Issue Fixed: Reduce the global data area (device extension) size
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.