;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; File: IRDASMC.INF
;
; INF to install smcirda.Sys NDIS 5.0 Miniport for SMC IrCC
; on Windows 2000
;
; Copyright 1997 - 1999 Standard Microsystems Corp.
; (nw)
;
;
; 4/21/99 (yo)
; IOConfig for the 3rd IO port (config reg) is added for only
; CAM35C44 EVB use on desktop PC
;
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;
[version]
CatalogFile=irdasmc.cat
;LayoutFile=layout.inf ; should only use this if installing as part of OS
signature="$Windows NT$"
Class = Infrared
ClassGUID = {6bdd1fc5-810f-11d0-BEC7-08002BE2092F}
provider=%strSMC%
DriverVer=12/12/2001, 5.1.2500.0 ; INF date is newer than binary's
[DestinationDirs]
DefaultDestDir=12 ; %windir%\system32\drivers
SysCopyFiles=12
SysDelFiles=12
[Manufacturer]
%strSMC%=SMC_IRCC
%strNEC%=NEC_IRCC
[ControlFlags]
ExcludeFromSelect=*SMCF010
ExcludeFromSelect=*SMCF030
ExcludeFromSelect=*NEC9151
[NEC_IRCC]
%*NEC9151.DeviceDesc%=*NEC9151.ndi, *NEC9151
[SMC_IRCC]
%*SMCF010.DeviceDesc%=*SMCF010.ndi, *SMCF010
%*SMCF030.DeviceDesc%=*SMCF030.ndi, *SMCF030
[*SMCF010.ndi]
SyssetupPnPFlags=1
DeviceID=*SMCF010
DelReg=SMC_DelReg
AddReg=*SMCF010.ndi.reg,*SMCF010.ndi.param
MaxInstance=1
BusType=14 ; ISAPNP Bus
Characteristics=0x4 ; NCF_PHYSICAL
CopyFiles=SysCopyFiles
[SMCF010.ndi.Coinstallers]
DelReg=SMC_DelCoinstallers
[*SMCF030.ndi]
DelReg=SMC_DelReg
AddReg=*SMCF030.ndi.reg,*SMCF030.ndi.param
BusType=14 ; ISAPNP Bus
Characteristics = 0x84 ; NCF_PHYSICAL, NCF_HAS_UI
CopyFiles=SysCopyFiles
DriverVer=12/12/2002, 5.1.2500.0 ; INF date is newer than binary's
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Add Registry Section for Install
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[*SMCF010.ndi.reg]
HKR,Ndi,Service,0,"smcirda"
HKR,Ndi\Interfaces,DefUpper,0,"ndisirda"
HKR,Ndi\Interfaces,UpperRange,0,"ndisirda"
HKR,Ndi\Interfaces,DefLower,0,"nolower"
HKR,Ndi\Interfaces,LowerRange,0,"nolower"
HKR,Ndi,BoardType,0,"3"
HKR,Ndi,RequiredAll,0,"MS_IrDA"
[*SMCF030.ndi.reg]
HKR,Ndi,Service,0,"smcirda"
HKR,Ndi\Interfaces,DefUpper,0,"ndisirda"
HKR,Ndi\Interfaces,UpperRange,0,"ndisirda"
HKR,Ndi\Interfaces,DefLower,0,"nolower"
HKR,Ndi\Interfaces,LowerRange,0,"nolower"
HKR,Ndi,BoardType,0,"3"
HKR,Ndi,RequiredAll,0,"MS_IrDA"
;
; This is the text that shows in the display area at the bottom
; of the Network dialog when this Adapter is selected in the
; scrolling window above.
;
HKR,Ndi,HelpText,,%strsmcirdaHelp%
[SMC_DelReg]
HKR,,EnumPropPages32
[SMC_DelCoinstallers]
HKR,,CoInstallers32
[*SMCF010.ndi.eval.reg]
HKR,,SmcIrdaOptions,0x00010001,1 ; all xceivers except certain HP's
; HKR,,SmcIrdaOptions,0x00010001,2 ; for HP1100/2100 xceivers
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Parameters Section -- part of AddReg on Install
; Key values are adjustable on ADVANCED Property Sheet
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[*SMCF010.ndi.param]
;
; Infrared Transceiver Selection
;
; If AUTO [default], then driver will auto-detect at initialization,
; which will produce a single spurious Tx pulse if HP/Sharp.
; This key can be used to prevent this from happening, if desired.
;
HKR,Ndi\params\RxSel,ParamDesc,,%strRXSEL%
HKR,Ndi\params\RxSel,default,,"0"
HKR,Ndi\params\RxSel,type,,enum
HKR,Ndi\params\RxSel\enum,"0",,%strRXSEL_0%
HKR,Ndi\params\RxSel\enum,"1",,%strRXSEL_1%
HKR,Ndi\params\RxSel\enum,"2",,%strRXSEL_2%
HKR,Ndi\params\RxSel\enum,"3",,%strRXSEL_3%
HKR,Ndi\params\RxSel\enum,"4",,%strRXSEL_4%
HKR,,RxSel,,"0" ; For some reason defaults are not being picked up.
;
; IrDA Minimum Turnaround Time (value in microseconds)
;
HKR,Ndi\params\MinTurnTime,ParamDesc,,%strIRDATURNTIME%
HKR,Ndi\params\MinTurnTime,default,,"1000"
HKR,Ndi\params\MinTurnTime,type,,enum
HKR,Ndi\params\MinTurnTime\enum,"500",,%strMinTurnTime_500%
HKR,Ndi\params\MinTurnTime\enum,"1000",,%strMinTurnTime_1000%
HKR,Ndi\params\MinTurnTime\enum,"5000",,%strMinTurnTime_5000%
HKR,Ndi\params\MinTurnTime\enum,"10000",,%strMinTurnTime_10000%
HKR,,MinTurnTime,,"1000" ; For some reason defaults are not being picked up.
;
; Maximum Speed
;
HKR,Ndi\params\MaxSpeed,ParamDesc,,%strMAXSPEED%
HKR,Ndi\params\MaxSpeed,flag,1,20,00,00,00
HKR,Ndi\params\MaxSpeed,default,,"8"
HKR,Ndi\params\MaxSpeed,type,,enum
HKR,Ndi\params\MaxSpeed\enum,"1",,%strMaxSpeed_1%
HKR,Ndi\params\MaxSpeed\enum,"2",,%strMaxSpeed_2%
HKR,Ndi\params\MaxSpeed\enum,"3",,%strMaxSpeed_3%
HKR,Ndi\params\MaxSpeed\enum,"4",,%strMaxSpeed_4%
HKR,Ndi\params\MaxSpeed\enum,"5",,%strMaxSpeed_5%
HKR,Ndi\params\MaxSpeed\enum,"6",,%strMaxSpeed_6%
HKR,Ndi\params\MaxSpeed\enum,"7",,%strMaxSpeed_7%
HKR,Ndi\params\MaxSpeed\enum,"8",,%strMaxSpeed_8%
HKR,,MaxSpeed,,"8" ; For some reason defaults are not being picked up.
;
; IrDA Speed enables
;
; bit=1 enables corresponding speed, 1FF is all speeds [default])
;
; d0 = 2400 d4 = 57600 d8 = 4000000
; d1 = 9600 d5 = 115200
; d2 = 19200 d6 = 576000
; d3 = 38400 d7 = 1152000
;
; Note: Miniport will always enable 9600,
; no matter what this key says
;
HKR,,SpeedEnable,,"1FF" ; For some reason defaults are not being picked up.
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; SMCF030
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[*SMCF030.ndi.param]
;
; Infrared Transceiver Selection
;
; For SMCF030, just add RxSel reg and select HP,
; do not add params as per a customer's request.
;
HKR,,RxSel,,"2" ; force HP.
;
; IrDA Minimum Turnaround Time (value in microseconds)
;
HKR,Ndi\params\MinTurnTime,ParamDesc,,%strIRDATURNTIME%
HKR,Ndi\params\MinTurnTime,default,,"1000"
HKR,Ndi\params\MinTurnTime,type,,enum
HKR,Ndi\params\MinTurnTime\enum,"500",,%strMinTurnTime_500%
HKR,Ndi\params\MinTurnTime\enum,"1000",,%strMinTurnTime_1000%
HKR,Ndi\params\MinTurnTime\enum,"5000",,%strMinTurnTime_5000%
HKR,Ndi\params\MinTurnTime\enum,"10000",,%strMinTurnTime_10000%
HKR,,MinTurnTime,,"1000" ; For some reason defaults are not being picked up.
;
; Maximum Speed
;
HKR,Ndi\params\MaxSpeed,ParamDesc,,%strMAXSPEED%
HKR,Ndi\params\MaxSpeed,flag,1,20,00,00,00
HKR,Ndi\params\MaxSpeed,default,,"8"
HKR,Ndi\params\MaxSpeed,type,,enum
HKR,Ndi\params\MaxSpeed\enum,"1",,%strMaxSpeed_1%
HKR,Ndi\params\MaxSpeed\enum,"2",,%strMaxSpeed_2%
HKR,Ndi\params\MaxSpeed\enum,"3",,%strMaxSpeed_3%
HKR,Ndi\params\MaxSpeed\enum,"4",,%strMaxSpeed_4%
HKR,Ndi\params\MaxSpeed\enum,"5",,%strMaxSpeed_5%
HKR,Ndi\params\MaxSpeed\enum,"6",,%strMaxSpeed_6%
HKR,Ndi\params\MaxSpeed\enum,"7",,%strMaxSpeed_7%
HKR,Ndi\params\MaxSpeed\enum,"8",,%strMaxSpeed_8%
HKR,,MaxSpeed,,"8" ; For some reason defaults are not being picked up.
;
; IrDA Speed enables
;
; bit=1 enables corresponding speed, 1FF is all speeds [default])
;
; d0 = 2400 d4 = 57600 d8 = 4000000
; d1 = 9600 d5 = 115200
; d2 = 19200 d6 = 576000
; d3 = 38400 d7 = 1152000
;
; Note: Miniport will always enable 9600,
; no matter what this key says
;
HKR,,SpeedEnable,,"1FF" ; For some reason defaults are not being picked up.
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Services Section
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[*SMCF010.ndi.Services]
AddService=SMCIRDA,2,SMCIRDA.AddService, common.EventLog
[*SMCF030.ndi.Services]
AddService=SMCIRDA,2,SMCIRDA.AddService, common.EventLog
[SMCIRDA.AddService]
DisplayName=%*SMCF010.ServiceDesc%
ServiceType=1 ; SERVICE_KERNEL_DRIVER
StartType=3 ; SERVICE_DEMAND_START
ErrorControl=1 ; SERVICE_ERROR_NORMAL
ServiceBinary=%12%\smcirda.sys ; where the driver is
LoadOrderGroup=NDIS
[common.EventLog]
AddReg=common.AddEventLog.reg
[common.AddEventLog.reg]
HKR,,EventMessageFile,0x00020000,"%%SystemRoot%%\System32\netevent.dll;%%SystemRoot%%\System32\Drivers\smcirda.Sys"
HKR,,TypesSupported,0x00010001,7
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; File/Directory Sections
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[SysCopyFiles]
smcirda.sys,,,2 ; Do not skip file
[SysDelFiles]
smcirda.sys
; SourceDisksNames not required if installing as part of OS
[SourceDisksNames]
1=%strDiskName%,,,
; Specifies the location of each file referencing the
; [SourceDisksNames] section
[SourceDisksFiles]
smcirda.sys = 1
irdasmc.cat = 1 ; required by WHQL
[*NEC9151.ndi]
DeviceID=*NEC9151
DelReg=NEC_DelReg
AddReg=*NEC9151.ndi.reg,*NEC9151.ndi.param
MaxInstance=1
BusType=14 ; ISAPNP Bus
Characteristics=0x4 ; NCF_PHYSICAL
CopyFiles=SysCopyFiles
[*NEC9151.ndi.Coinstallers]
DelReg=NEC_DelCoinstallers
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Add Registry Section for Install
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[*NEC9151.ndi.reg]
HKR,Ndi,Service,0,"NECIRDA"
HKR,Ndi\Interfaces,DefUpper,0,"ndisirda"
HKR,Ndi\Interfaces,UpperRange,0,"ndisirda"
HKR,Ndi\Interfaces,DefLower,0,"nolower"
HKR,Ndi\Interfaces,LowerRange,0,"nolower"
HKR,Ndi,BoardType,0,"3"
HKR,Ndi,RequiredAll,0,"MS_IrDA"
;
; This is the text that shows in the display area at the bottom
; of the Network dialog when this Adapter is selected in the
; scrolling window above.
;
HKR,Ndi,HelpText,,%strNECIrdaHelp%
[NEC_DelReg]
HKR,,EnumPropPages32
[NEC_DelCoinstallers]
HKR,,CoInstallers32
[*NEC9151.ndi.eval.reg]
HKR,,NECIrdaOptions,0x00010001,1 ; all xceivers except certain HP's
; HKR,,NECIrdaOptions,0x00010001,2 ; for HP1100/2100 xceivers
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Parameters Section -- part of AddReg on Install
; Key values are adjustable on ADVANCED Property Sheet
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[*NEC9151.ndi.param]
;
; Infrared Transceiver Selection
;
; If AUTO [default], then driver will auto-detect at initialization,
; which will produce a single spurious Tx pulse if HP/Sharp.
; This key can be used to prevent this from happening, if desired.
;
HKR,Ndi\params\RxSel,ParamDesc,,%strRXSEL%
HKR,Ndi\params\RxSel,default,,"0"
HKR,Ndi\params\RxSel,type,,enum
HKR,Ndi\params\RxSel\enum,"0",,%strRXSEL_0%
HKR,Ndi\params\RxSel\enum,"1",,%strRXSEL_1%
HKR,Ndi\params\RxSel\enum,"2",,%strRXSEL_2%
HKR,Ndi\params\RxSel\enum,"3",,%strRXSEL_3%
HKR,Ndi\params\RxSel\enum,"4",,%strRXSEL_4%
HKR,,RxSel,,"0" ; For some reason defaults are not being picked up.
;
; IrDA Minimum Turnaround Time (value in microseconds)
;
HKR,Ndi\params\MinTurnTime,ParamDesc,,%strIRDATURNTIME%
HKR,Ndi\params\MinTurnTime,default,,"1000"
HKR,Ndi\params\MinTurnTime,type,,enum
HKR,Ndi\params\MinTurnTime\enum,"500",,%strMinTurnTime_500%
HKR,Ndi\params\MinTurnTime\enum,"1000",,%strMinTurnTime_1000%
HKR,Ndi\params\MinTurnTime\enum,"5000",,%strMinTurnTime_5000%
HKR,Ndi\params\MinTurnTime\enum,"10000",,%strMinTurnTime_10000%
HKR,,MinTurnTime,,"1000" ; For some reason defaults are not being picked up.
;
; Maximum Speed
;
HKR,Ndi\params\MaxSpeed,ParamDesc,,%strMAXSPEED%
HKR,Ndi\params\MaxSpeed,flag,1,20,00,00,00
HKR,Ndi\params\MaxSpeed,default,,"8"
HKR,Ndi\params\MaxSpeed,type,,enum
HKR,Ndi\params\MaxSpeed\enum,"1",,%strMaxSpeed_1%
HKR,Ndi\params\MaxSpeed\enum,"2",,%strMaxSpeed_2%
HKR,Ndi\params\MaxSpeed\enum,"3",,%strMaxSpeed_3%
HKR,Ndi\params\MaxSpeed\enum,"4",,%strMaxSpeed_4%
HKR,Ndi\params\MaxSpeed\enum,"5",,%strMaxSpeed_5%
HKR,Ndi\params\MaxSpeed\enum,"6",,%strMaxSpeed_6%
HKR,Ndi\params\MaxSpeed\enum,"7",,%strMaxSpeed_7%
HKR,Ndi\params\MaxSpeed\enum,"8",,%strMaxSpeed_8%
HKR,,MaxSpeed,,"8" ; For some reason defaults are not being picked up.
;
; IrDA Speed enables
;
; bit=1 enables corresponding speed, 1FF is all speeds [default])
;
; d0 = 2400 d4 = 57600 d8 = 4000000
; d1 = 9600 d5 = 115200
; d2 = 19200 d6 = 576000
; d3 = 38400 d7 = 1152000
;
; Note: Miniport will always enable 9600,
; no matter what this key says
;
HKR,,SpeedEnable,,"1FF" ; For some reason defaults are not being picked up.
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Services Section
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[*NEC9151.ndi.Services]
AddService=NECIRDA,2,NECIRDA.AddService, common.EventLog
[NECEval.ndi.Services]
AddService=NECIRDA,2,NECIRDA.AddService, common.EventLog
[NECIRDA.AddService]
DisplayName=%*NEC9151.ServiceDesc%
ServiceType=1 ; SERVICE_KERNEL_DRIVER
StartType=3 ; SERVICE_DEMAND_START
ErrorControl=1 ; SERVICE_ERROR_NORMAL
ServiceBinary=%12%\smcirda.sys ; where the driver is
LoadOrderGroup=NDIS
[common.EventLog]
AddReg=common.AddEventLog.reg
[common.AddEventLog.reg]
HKR,,EventMessageFile,0x00020000,"%%SystemRoot%%\System32\netevent.dll;%%SystemRoot%%\System32\Drivers\smcirda.Sys"
HKR,,TypesSupported,0x00010001,7
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
; Localizable Strings
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
[strings]
strSMC="SMC"
*SMCF010.DeviceDesc="SMC IrCC - Fast Infrared Port"
*SMCF030.DeviceDesc="SMC IrCC - Fast Infrared Port(IR module:HP)"
*SMCF010.ServiceDesc="SMC IrCC Miniport Device Driver"
*SMCF030.ServiceDesc="SMC IrCC Miniport Device Driver"
strsmcirdaHelp="The SMC IrCC Device permits wireless communication with other devices conforming to IrDA standards using invisible infrared light."
strDiskName="SMC IR_NDIS"
strNEC="NEC"
*NEC9151.DeviceDesc="NEC IrCC - Fast Infrared Port"
*NEC9151.ServiceDesc="NEC IrCC Miniport Device Driver"
strNECIrdaHelp="The NEC IrCC Device permits wireless communication with other devices conforming to IrDA standards using invisible infrared light."
strRXSEL="Infrared Transceiver Type"
strIRDATURNTIME="Min. Turn-Around Time"
strMAXSPEED="Speed Limit"
strRXSEL_0="AUTO [Default]"
strRXSEL_1="IBM / Infineon / Temic"
strRXSEL_2="HP"
strRXSEL_3="Sharp"
strRXSEL_4="VISHAY Telefunken"
strMinTurnTime_500=" 0.5 mS"
strMinTurnTime_1000=" 1.0 mS [Default]"
strMinTurnTime_5000=" 5.0 mS"
strMinTurnTime_10000="10.0 mS"
strMaxSpeed_1=" 9.6 kbps"
strMaxSpeed_2=" 19.2 kbps"
strMaxSpeed_3=" 38.4 kbps"
strMaxSpeed_4=" 57.6 kbps"
strMaxSpeed_5=" 115.2 kbps"
strMaxSpeed_6=" 576 kbps"
strMaxSpeed_7="1.152 Mbps"
strMaxSpeed_8="4 Mbps"
V_CLASSNAME="Infrared Adapters"
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.