idadapt.txt Driver File Contents (NBK001835_XP_LAN_7_3_13_0.exe)

IDADAPT - Intel PCI NIC Identification Utility
May 12, 2003
====================================================================

DISCLAIMER:
-----------

This IDADAPT.TXT as well as the software described in it is furnished under
license and may only be used or copied in accordance with the terms of the
license. The information in this manual is furnished for informational
use only, is subject to change without notice, and should not be construed
as a commitment by Intel Corporation. Intel Corporation assumes no
responsibility or liability for any errors or inaccuracies that may appear
in this document or any software that may be provided in association with
this document.
Except as permitted by such license, no part of this document may be
reproduced, stored in a retrieval system, or transmitted in any form or
by any means without the express written consent of Intel Corporation.


CONTENTS
--------
- OVERVIEW
- RUNNING THE UTILITY
- USAGE NOTES
- EXAMPLES
- LIMITATIONS
- DRIVER TO PCI ID CROSS REFERENCE


OVERVIEW
--------

The Intel PCI NIC Identification Utility identifies Intel PCI adapters
and provides adapter properties and assigned resources. You can readily
use this information in batch, script and configuration files for
automation purposes.

The utility returns the following values:

- Slot number. PCI slot number reported by the adapter; returned in decimal
  format.
- SLOTX. PCI slot number reported by the adapter; For Gigabit solutions it is
  returned in hexidecimal format.
- PCI device ID. Adapters sharing the same PCI device ID can use the same
  driver. See the table at the end of this document showing the
  relationship between drivers and PCI device IDs.
- SSID - PCI Subsystem ID and the Subvendor ID displayed in hexidecimal.
- MAC address. 12-digit Ethernet ID assigned to the adapter. This number
  is also printed on the adapter label.

RUNNING THE UTILITY
-------------------

To run IDADAPT.EXE, you must start the computer in DOS. This utility
should not be run from a DOS session within any version of Microsoft
Windows*, or in any other non-DOS operating system.

IDADAPT.EXE can be run with no command line options, or with either of the
following command line options:

	/?
	Displays help information

	/B:<filename>
	Creates a file containing the adapter properties with the name
	specified. This file is in the format of a DOS batch file. If this
	file is named with the extension of .BAT, it can be executed as a
	batch file. Executing this batch file will create environment
	variables from the adapter properties.

USAGE NOTES
-----------

Running the utility with no command line parameters displays the adapter
properties on the screen. For example, if you enter IDADAPT in a computer
with 2 Intel PCI adapters installed, the display would resemble the
following:
NIC1 SLOT=43 SLOTX=0068 PCI ID=1229 SSID=10118086 MAC=0002B31FE072
NIC2 SLOT=47 SLOTX=0069 PCI ID=1031 SSID=10118086 MAC=0090270AAF73

In this example, the first adapter has the following properties:
- Logical slot is 43
- SLOTX is 0068
- PCI device ID is 1229
- SSID is 10118086
- MAC address is 0002B31FE072

If the utility does not find any adapters, it reports "No supported
adapters were found" and returns an error level of 1. You can use the
error level for conditional branching in batch files.

If you run the utility using /B:<filename>, it creates a file with the
name you specified. This file contains adapter properties in a batch
file format. This is an example batch file:
SET NIC1_SLOT=43
SET NIC1_SLOTX=0068
SET NIC1_PCIID=1229
SET NIC1_SSID=10118086
SET NIC1_MAC=0002B31FE072
SET NIC2_SLOT=47
SET NIC2_SLOTX=0069
SET NIC2_PCIID=1031
SET NIC2_SSID=10118086
SET NIC2_MAC=0090270AAF73

If the name you assign to the file ends in .BAT, it can be executed in DOS.
Executing the file sets environment variables for each property of each
adapter.

Once the environment variables are created by the batch file, you can
insert the values into configuration files as needed. See examples below.

When using this batch file, remember that about 64 bytes of environment
space will be needed for each adapter found. Insure that you make
sufficient environment space available in your configuration.

EXAMPLES
---------

1
-
To create a startup disk that loads a Packet Driver named PCKTDRVR.COM
on the second found NIC, the AUTOEXEC.BAT file might contain the following:
IDADAPT /B:INTELSET.BAT
IF ERRORLEVEL 1 GOTO NO_NIC
CALL INTELSET.BAT
PCKTDRVR 0x60 %NIC2_SLOT%
GOTO END
:NO_NIC
ECHO NO ADAPTER FOUND!!
PAUSE
:END

2
-
To create a startup disk that automatically detects the adapter model
and loads the proper DOS ODI driver, the AUTOEXEC.BAT file might contain
the following:
IDADAPT /B:INTELSET.BAT
IF ERRORLEVEL 1 GOTO NO_NIC
CALL INTELSET.BAT
LSL
IF "%NIC1_PCIID%" == "1229" GOTO PRO100
IF "%NIC1_PCIID%" == "2449" GOTO PRO100
IF "%NIC1_PCIID%" == "1000" GOTO PRO1000
IF "%NIC1_PCIID%" == "1001" GOTO PRO1000
IF "%NIC1_PCIID%" == "1002" GOTO PRO1000
IF "%NIC1_PCIID%" == "1003" GOTO PRO1000
IF "%NIC1_PCIID%" == "1004" GOTO PRO1000
GOT0 NO_NIC
:PRO100
E100BODI
GOTO CONTINUE
:PRO1000
E1000ODI
GOTO CONTINUE
:CONTINUE
IPXODI
VLM /V4
GOTO END
:NO_NIC
ECHO !! NO SUITABLE ADAPTER FOUND !!
PAUSE
:END


LIMITATIONS
-----------

This utility is designed to work with Intel PCI adapters. It
should work with any modern Intel PCI bus adapter, as well as LAN on
Motherboard designs based on Intel 10/100 and 10/100/1000 silicon.

It does not work with any Intel CardBus, PCMCIA, ISA, EISA or MCA bus
adapters, or obsolete (products released prior to 1996) Intel network
adapters of any architecture.

IDADAPT.EXE will detect and return information on a maximum of sixteen
adapters in a computer.

DRIVER TO PCI ID CROSS REFERENCE
--------------------------------

 ---------------------------------------------------------------
|PCI ID	| ADAPTER FAMILY 	| NDIS 2 driver	| DOS ODI driver|
|----------------------------------------------------------------
| 1000	| PRO/1000		| E1000.DOS	| E1000ODI.COM	|
| 1001	| PRO/1000		| E1000.DOS	| E1000ODI.COM	|
| 1002	| PRO/1000		| E1000.DOS	| E1000ODI.COM	|
| 1003	| PRO/1000		| E1000.DOS	| E1000ODI.COM	|
| 1004	| PRO/1000		| E1000.DOS	| E1000ODI.COM	|
| 1005	| PRO/1000		| E1000.DOS	| E1000ODI.COM	|
| 1006	| PRO/1000		| E1000.DOS	| E1000ODI.COM	|
| 1007	| PRO/1000		| E1000.DOS	| E1000ODI.COM	|
| 1008	| PRO/1000		| E1000.DOS	| E1000ODI.COM	|
| 1009	| PRO/1000		| E1000.DOS	| E1000ODI.COM	|
| 100A	| PRO/1000		| E1000.DOS	| E1000ODI.COM	|
| 100B	| PRO/1000		| E1000.DOS	| E1000ODI.COM	|
| 100C	| PRO/1000		| E1000.DOS	| E1000ODI.COM	|
| 100D	| PRO/1000		| E1000.DOS	| E1000ODI.COM	|
| 100E	| PRO/1000		| E1000.DOS	| E1000ODI.COM	|
| 100F	| PRO/1000		| E1000.DOS	| E1000ODI.COM	|
| 1229	| PRO/100+/S families  	| E100B.DOS	| E100BODI.COM	|
| 1030	| InBusiness 10/100	| D100IB.DOS	| N/A		|
| 1031	| PRO/100 V family    	| E100B.DOS	| E100BODI.COM	|
| 103A	| PRO/100 V family   	| E100B.DOS	| E100BODI.COM	|
| 103B	| PRO/100 V family    	| E100B.DOS	| E100BODI.COM	|
| 103C	| PRO/100 V family    	| E100B.DOS	| E100BODI.COM	|
| 103D	| PRO/100 V family   	| E100B.DOS	| E100BODI.COM	|
| 103E	| PRO/100 V family    	| E100B.DOS	| E100BODI.COM	|
| 2449	| PRO/100 V family    	| E100B.DOS	| E100BODI.COM	|
 ---------------------------------------------------------------


Copyright (C) 2003, Intel Corporation.
All rights reserved.


* Other product and corporate names may be trademarks of other companies
  and are used only for explanation and to the owners' benefit, without
  intent to infringe.

---End of IDADAPT.TXT---

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 1.17