Intel(R) DIAGS Release Notes ============================ May 12, 2003 DISCLAIMER ========== This software is furnished under license and may only be used or copied in accordance with the terms of the license. The information in this manual is furnished for informational use only, is subject to change without notice, and should not be construed as a commitment by Intel Corporation. Intel Corporation assumes no responsibility or liability for any errors or inaccuracies that may appear in this document or any software that may be provided in association with this document. Except as permitted by such license, no part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means without the express written consent of Intel Corporation. Contents ======== - OVERVIEW - RUNNING THE UTILITY - CUSTOMER SUPPORT OVERVIEW ======== Intel's diagnostic software lets you test the adapter to see if there are any problems with the adapter hardware, the cabling, or the network connection. You can also use diagnostics to isolate problems during troubleshooting. There are two test programs documented here. Both test Intel® adapters, and operate identically. These utilities are designed to test hardware operation and confirm the adapter's ability to communicate with another adapter in the same network, primarily confirming cabling. They should not be used to judge performance. They can test the adapter whether or not there is a responder on the network. In order to do a thorough test, however, you should set-up a second system on the network as a responder prior to starting a test. RUNNING THE UTILITY =================== - DIAGS.EXE runs under MS-DOS* v6.22 or later. (It will not run from a DOS window in IBM OS/2* or a Microsoft* Windows* product.) - DIAGS32.EFI runs in a 32 bit EFI system. - DIAGS64.EFI runs in a 64 bit EFI system (Intel® Itaniumô-based system). 1. Boot to DOS or EFI. 2. Switch the active volume to this disk. 3. From the command prompt, type the following and press <Enter> "DIAGS" for DOS "DIAGS32" for EFI32 "DIAGS64" for EFI64 CUSTOMER SUPPORT ================ - Main Intel web support site: http://support.intel.com - Network products information: http://www.intel.com/network - Worldwide access: Intel has technical support centers worldwide. Many of the centers are staffed by technicians who speak the local languages. For a list of all Intel support centers, the telephone numbers, and the times they are open, visit http://www.intel.com/support/9089.htm. - Telephone support: US and Canada: 1-916-377-7000 (7:00 - 17:00 M-F Pacific Time) Legal / Disclaimers =================== Copyright (C) 2003, Intel Corporation. All rights reserved. Intel Corporation assumes no responsibility for errors or omissions in this document. Nor does Intel make any commitment to update the information contained herein. * Other product and corporate names may be trademarks of other companies and are used only for explanation and to the owners' benefit, without intent to infringe.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.