1. pro110b.exe Driver
2. INSTALL.TXT File Contents

INSTALL.TXT Driver File Contents (pro110b.exe)

=====================================================
=     PRO110(B) PCI-BUS FAST ETHERNET ADAPTER       =
=     Driver Installation Procedure                 =
= >>> SCO OpenServer v5.0 MDI Driver                =
=====================================================

The SCO OpenServer v5.0 driver files are in the \SCO_UNIX\5.X subdirectory of
this diskette.

1. Login as root user. (On maintenance mode)

2. Put network driver diskette to floppy A: and use doscp command
   to copy the file "setup" for installing SCO UNIX Network Driver
   into UNIX's directory.

      # cd /
      # doscp A:/sco_unix/5.x/setup  /setup
      # chmod +x /setup
      # ./setup

3. Use netconfig utility, available options :

      # netconfig

4. To add adapters, select "Add New LAN adapter" from "Hardware".
   The message "The following adapters have been found:" will appear
   and select "PRO110(B) PCI Fast Ethernet Adapter".

5. Select SCO TCP/IP to add protocol.

6. Enter the required information and use [TAB] key to press "OK"

     Local Host Name:  |scosysv_____________|
          IP Address:  |192.72.53.55________|
             Netmask:  |255.255.255.0_______|
   Broadcast Address:  |192.72.53.255_______|
         Domain Name:  |scosysv.com_________|
     TCP connections:  |256_________________|
         Pseudo ttys:  |32__________________|

7. At "Hardware" menu select "Exit" to quit the netconfig utility.

8. Do you want to relink to kernel now ?               y

9. Do you want this kernel to boot by default (y/n)    y

10.Do you want the kernel environment rebuilt (y/n)    y

11.Reboot unix.

       # shutdown -y -g0

12. When the system boots, you should see the following message among the
    other configuration messages:

    %A40X0  I/O port range    IRQ   driver version, speed/mode, node address