1. pro110b.exe Driver
2. INSTALL.TXT File Contents

INSTALL.TXT Driver File Contents (pro110b.exe)

=====================================================
=     PRO110(B) PCI-BUS FAST ETHERNET ADAPTER       =
=     Driver Installation Procedure                 =
= >>> SCO UNIX v3.2.4X LLI Driver                   =
=====================================================

The SCO UNIX v3.2.4X driver files are in the \SCO_UNIX\4.X subdirectory of
this diskette.

1. Login as root user. (On maintenance mode)

2. Put network driver diskette to floppy A: and use doscp command
   to copy the file "setup" for installing SCO UNIX Network Driver
   into UNIX's directory.

   # cd /
   # doscp A:/sco_unix/4.x/setup /setup
   # chmod +x /setup
   # ./setup

3. Use netconfig utility, available options :

       # netconfig

       The screen will display the following messages, and Select
       item (1) to Add a chain  :

       1) Add a chain
       2) Remove a chain
       3) Reconfigure an element in a chain
       4) Quit

4. After the above option completed, the screen display next option
   messages :

   Select item ( ) : sco_tcp   SCO TCP/IP for UNIX

5. When the user completed the above option, then various adapter
   drivers in SCO UNIX occur and select "PRO110(B) PCI Fast Ethernet Adapter
   , board 0" item.

6. Add chain sco_tcp -> A40X0 (y/n),   TYPE 'y'

7. Enter the internet Address of this interface,
   for example : 192.72.53.55

8. Enter the netmask for this interface (default 255.255.255.0).

9. Does the interface use a broadcast address of all 1's (y/n),
   default : y

10. Enter the boardcast address for this interface,
    default : xxx.xx.x.255             press ENTER

11. Are these values correct ? (y/n)   TYPE 'y'

12. Pseudo ttys are currently configured, do you want to:

       1) Add Pseudo ttys
       2) Remove Pseudo ttys
       Select an option or enter q to quit [q]   TYPE 'q'

    TCP connections currently configured, do you want to:

       1) Add TCP Connections
       2) Remove TCP Connections
       Select an option or enter q to quit [q]   TYPE 'q'

13. Available options:

       1) Add a chain
       2) Remove a chain
       3) Reconfigure a element in a chain
       q. Quit

    Select option: q

14. Do you want to relink to kernel now ?               y

15. Do you want this kernel to boot by default (y/n)    y

16. Do you want the kernel environment rebuilt (y/n)    y

17. Reboot unix.

        # shutdown -y -g0