OEM Release Notes ================= 3.50.43(05-27-05) ================= 1. Installation - Environment variable PATH now has OmniPass folder. Uninstallation removes it from PATH. Also, atdiag.exe is copied to all systems where authntec.dll plugin is installed 2. Added one more file opintc.dll to be copied to OmniPass folder in the target system FOR OEM 32 3. Added UI customisation to autheng.dll module For OEM 25: 4. Installation modified to install on all systems FOR OEM 29 : 5. Updated redistributables files from 1.0.1.2c for OEM 29 . receieved on 24thmay 2005 6. Added fix for the CAPSLOCK problem during password replacement operation. If the user had pressed the CAPSLOCK key, the the alpha-characters were not getting filled correctly. FOR OEM TOSHIBA: 7. Make a drivers folder in the final image that contains specific FP device drivers used by the OEM FOR OEM 29 : 8. Added code to support mulitple sensor at a time and pull down menu implemented FOR OEM 32 9.changed capture parameters for better enrollment and verification in oem 32 dll. FOR OEM 24: 10. Installation - Fix sensor software not installing properly 3.50.42(05-24-05) ================= For OEM 29: 1. Checked in new version 1.0.1.2b of OEM 29 setup. This has license crash fix. Receieved on 23 may 2005. 2. In password replacement tab from OmniPass control panel, deleting a page shows a warning message. When this message is up user can click on other dialog buttons. Fixed this so that user cannot perform any operations when a message window is being shown FOR OEM TOSHIBA: 3. CRITICAL BUG FIXED - If user try to encrypt folder with more then 2GB data, user can lost data because of improper error code handling that occurred due to MS Access 2GB database file limit. For OEM 25: 4. Installation modified to set the Tap speed of sensor to Fast 3.50.41(05-22-05) ================= 1. Fix BioKey Installation problem For OEM 32: 2. Integrate customised japanese help file to OmniPass Installation FOR OEM TOSHIBA: 3. Setting focus on GINA window bug fixed and working without enabling strong-logon. FOR OEM 25 4. Modified Installation to set Tap speed of the FP sensor to Fast or Maximum allowed 3.50.40(05-16-05) ================= 1. Add support for Identify operations for some devices which did not support Identity 2. Fix enroll wizard crash when cancel button is pressed in startup dialog. Noted on some specific systems 3. Fix BioKey Uninstall issue from OmniPass uninstallation 4. During enrollment if a message box shows up, user can still click on dialog buttons. Fixed this 5. Fixed synchronization issue because of sleep for (UPEK) auth device 6. New version of BioKey (ver 1.5) drivers integrated FOR OEM 17 : 7. Fix installation problem during upgrade. FOR OEM TOSHIBA: 8. Add DispStartupMsgBox registry entry for OEM build FOR OEM 18: 9. Added code to launch sensor orientation adjustment executable 3.50.39(05-10-05) ==================== FOR OEM 29: 1. Checked in new version of OEM distributable components v 1.0.0.7c For OEM 25: 2. Installation changes - Make the Tapspeed to max not the scrollwheel sensitivity. FOR OEM 35: 3. Bundle different drivers for OEM build FOR OEM TOSHIBA: 4. TCHINESE Help - Fixed a typo. 3.50.38 (05-06-05) ==================== FOR OEM 23: 1. Fixed issue where the Fingerprint Box flashes a red slashed circle over a faint fingerprint 5 times before the fingerprint in the Auth Bar becomes a red X. 2. Fixed bug when encryting/decrypting file with name more than 256 characters 3. Fix Encrypt/Decrypt bug when dragging an encrypted file to an encrypted folder. The contents of the source folder were incorrect FOR OEM 35: 4. Force the user to export the user profile after enrollment. This is based on registry entry. 5. Added support to allow master password as an authentication device FOR OEM 21: 6. Updated Japanese strings. 7. Show image without minutea FOR OEM 17: 8.Installation changed to differentiate a 1400 from other systems 9.Pkc11drv is not longer avialble as storage device for 25 builds. 3.50.37 (04-26-05) ================== 1. Fix bug in password replacement where credentials were not being filled in the right window. FOR OEM 29: 2.Fix bug associated with installation/uninstallation of OmniPass multiple times 3.50.36 (04-22-05) ================== For OEM 29: 1. Update driver files from latest sdk 1.0.0.4e . 2. Fixed bug where authentication is aborted if a required device is not present. Now a message is displayed indicating device is not present FOR OEM 21: 3. Added code to Improve the Image quality. For OEM 27: 5. Finger animation on the capture finger window now stops after 5 captures and during key generation. 6. Connect during Verify finger operations now display the device probing bitmap and if the connection fails display device not found bitmap. 7. The verify threads are synchronised better to handle connect/disconnect better when user toggles the fingerprint button on the auth bar. 8. The icon on the auth bar would get hidden if a connect for last validate/identify operation is pending. 3.50.35 (04-19-05) ================== 1. Fix bug where user Confirmation dialog displays the user name during user removal 2. Fix a bug in WinXP associated with RDP. The unlock computer dialog will not work when trying to unlock remotely FOR OEM TOSHIBA: 3. Enable strong logon authentication forcefully when user enables Classic logon (if "GinaFGWFix" registry present). 4. Displays a messagebox before displaying the startup page in enrollment wizard. This is controlled by a registry entry 'DispStartupMsgBox'. This is to introduce a delay which fixes a random crash in scurapp.exe associated with 'mlang.dll'. Seen in some asian language systems. 3.50.34 (04-15-05) ==================== 1. File and FOlder encryption - FIXED CRITICAL BUG: If non admin user tries to encrypt a folder in root drive on a NTFS file system, source folder can be deleted and the user can lose data. This issue is introduced 3.50.22 version onwards. 2. Fix removal of some system files during uninstall of OmniPass. This was making some software (Infenion TPM) not work 3. Korean help file - Indentation issues fixed. 3.50.33 (04-13-05) (THIS VERSION IS NOT LABELLED) ==================== FOR OEM 17: 1. GUI Customisation 2. Add support for 1400 tablets in installation 3. Display error message in PIN box if verify fails when using PKC11 drive 3.50.32 (04-11-05) ==================== 1. Add support to connect a machine to OmniPass enterprise server 2. New drivers version 1.0.0.8 of BSP added for UPEK 3.50.31 (04-08-05) ==================== 1. Added support for biokey installation 2. Fix bug in Enterprise edition where the password of super user was getting corrupted in the code because of a race condition 3. PKC11DRV - Fix error messages - Raak's UI is now used to prompt for PIN. 4. Italian language support added. 5. Added support in installation to install scr222 drivers 6. Integreate new Authentec drivers from SDK 6.4.12.0 PCCARD, USBAES and USB2500. 7. Fix logging events not working properly in Enterprise edition FOR OEM 34: 8. Customized Digicert Pages has been added FOR OEM 23: 9. Integrate 1.4.3 files from SDK FOR OEM TOSHIBA: 10. Added/Updated Images to avoid text overlapping in other languages. 11. Fixed typos in TChinese and Schinese help files and Fixed the the highlighting issues in Korean help file. 12. Fixed the Japanese Typo in enroll Wizard 3.50.30 (04-01_05) ================== FOR OEM 21: 1. Changed name of Fingerprint Driver 2. Fixed crash during enrollment practice. 3. Fixed: Gina authentication always fails after enrolling a user and before rebooting when using PKC11 drive 4. Fixed: Error messages are now cleared in the change PIN dialog when the user types again. 5. Enterprise Edition - FIx logging of events not wroking properly FOR OEM 23: 6. Integrate new drivers from sdk 1.4.3 7. Enterprise - Fxed a bug because of which the client system does not come online even when the network & server are up. FOR OEM TOSHIBA: 8. Fixed: Gina window focus problem. Controlled by registry 9. Fixed: An encrypt file and a decrypt file both show up when usercancels decrypt process. 3.50.29 (03-30_05) ================== 1. Fix File and Folder encryption bug for a wrong error message 3.50.28 ================== FOR OEM 29: 1 checked in version 1.0.0.3c of 123id drivers 3.50.27 ================== FOR OEM 29: 1. Added new installation files from the OEM. FOR OEM 24: 3. Revert back to older installation files for FP sensor dated Jul/28/04 FOR OEM PRIVARIS: 4. Library files now being copied to the system32 directory. A few tweaks to work better with the OEM's library. 3.50.26 ================== FOR OEM UPEK: 1.Updated new BSP. This new BSP support cancel operation Added silient install and uninstall option during setup of BSP. 3.50.25 ================== 1. Fix File and Folder encryption bug where if user starts encrypting more than 1 folder, user sees file overwrite warning. 3.50.24 (03-15-05) ================== FOR OEM 23: 1. Did some GUI changes in plugin. 3.50.23 (03-14-05) ================== 1. Fix OmniPass service taking 100% CPU when using Smart card. 2. Fix File and Folder encryption bug where if user double clicks more then 2 times on an encrypted file, User will lose the file. FOR OEM 23: 3. Integreate new drivers from sdk 1.4.1 4. Added code to implement new enrollment logic. 3.50.22 (03-09-05) ================== 1. Fix bug where if no user is logged to OmniPass, selecting the Remove user would cause the "Permissions denied" page to be displayed. This is fixed now. 2. Fix File and Folder encryption bug where, if user presses 'Cancel' during encryption some files/folders may be lost. 3. Fix Bug - If the user exports the profiles from any version before 3.01.39 and import to any version after 3.01.39, scureapp crashes. 3.50.21 (03-05-05) ================== 1. Fix bug where the trial and lite edition cannot be upgraded to retail version 2. Fixed the string cut off in Japanese. Noted with TPM authentic device 3.50.20 (03-04-05) ================== 1. Bug fix - If system setting is modified to automatically login the user and if the user has some authentication device as required device for logon, system hangs FOR OEM 25: 2. Fixed text cut off in French and German dialogs. FOR OEM TOSHIBA: 3. Hide password wizard and do not support remember password option for dialogs. These are controlled through registry entries. 4. Fixed some overlapping text/tab cutoff etc.in the GUI. 3.50.19 (03-03-05) ================== 1. Modified the PENDRV plugin to use 32 byte Pin size as per customer request. For 25: 2. Added support for French & German 3. Bug fix in PKC11DRV plugin - When PKc11drv is used as storage device, sometimes on reboot the windows user will not be logged in to OmniPass eventhough system settings is set to automatically logon the windows user. FOR OEM 23: 3. Implement new Enroll Algoritham suggested by the OEM. 4. Added customized user interface. 3.50.18 (02-23-05) ================== 1. Bug fix - Where Guest account could not enroll in OmniPass With this fix a GUEST can enroll in OmniPass but will not be able to perform encrypt/decrypt operations 3.50.17 (02-21-05) ==================== 1. Bug fix - OmniPass failed to enroll users with NULL password after repairing the operating system. 2. The PKC11 storage device is modified not to prompt for PIN if the user is not enrolled. 3. Upek related changes 3.50.16 (02-16-05) ==================== FOR OEM TOSHIBA: 1. Added support to build the OEM version. 2. If the 2500 sensor is not present install trial version else install regular version. 3.50.15 (02-10-05) ==================== 1. Bug fixed - In the authentication bar, after successful authentication the red Cross Image is displayed for a short while before displaying the Green checkmark FOR OEM 25: 2. Font changes and color changes 3. FOR OEM : NTRANCE/VALIDITY/ATMELFP/123ID Bug fix - Pressing cancel on finger enrollment erases already enrolled fingers 4. Removed the close button from import/export pages to be consistent with other pages. 3.50.14 (02-03-2005) ==================== 1. Integrated new Authentec NAV service. For OEM 23: 2. Bug fix - The finger window will not disappear when clicking on OEM auth icon. 3.50.13 (02-02-2005) ==================== 1. Added some modifications/bug fix in enterprise edition. 2. Bug fix- Apply button does not get enabled when settings changes. This bug was happening for audio,tootip and startup option setting 3. Bug fix - Trying to enroll a partially enrolled user again gives error in Emrollment wizard 4. Bug fix - Partially enrolled user can still do some operations. 5. Bug fix - In XP home during shutdown the desktop flashes after displaying the shutdown screen for couple of seconds. FOR OEM 23: 6. Integrated new drivers FOR OEM PRIVARIS: 7. Made some design changes 8. OEM GUI customisation FOR OEM 25: 9. Bug fix - "Change Password" Option becomes visible when user logs off from OmniPass. FOR OEM 21: 10. Added one more authetication device support FOR OEM 32: 12. Build new OEM. 3.50.12 (01/25/05) ================== 1. Fix bug - In some systems OutlookExpress hangs after switch identiities if OmniPass is present. For OEM 23: 2. Bug fix - sensor not getting detected when enrollment wizard starts and sensor is connected later FOR OEM 29: 3. Added support for mutiple sensor selection 3.50.11 (01/24/05) ================== 2. Bug fix - During decryption, if destination file already exists,File can not be decrypted from virtual folder view->right click menu ->"Decrypt to". 3. Added Single touch support for 2500 sensors. 4. Bug fix in TPM - Fixed the crash on hitting "Detail" button several times 5. Bug fix - Cut off in Authentication window when Display orientation changes. 7. Integrated the Password Wizard translations in all languages. For OEM 17: 8. Made some modification in the GUI. 9. Setup program is modified to do some customize installation for OEM 3.50.10 ================== FOr OEM 25: 1. Modified OmniPass setup to detect OEM machines. 2. Added WHQled driver for USB2500 from Authntec's 6.4.10.0 SDK. For OEM 23: 3. Added new drivers. 3.50.09 (01-13-05) ================== 1. Made some enhancements in the enterprise edition 2. Improved the perfomance of PKC11DRV drive. 3. Added support for one more deviceDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.