Install.ini Driver File Contents (MBD001185_Audio_XP_5-12-01-3581.exe)

[5.0]
;***Windows 2000***
TopText=Drivers for this operating system are not supported by this driver installation.  Please go to http://support.buympc.com for supported drivers.

[4.0]
***Windows NT 4.0***
TopText=Drivers for this operating system are not available at this time.
SideText=

[4.10]
;***Windows 98***
TopText=Drivers for this operating system are not available at this time.
SideText=

[5.1]
;***Windows XP***
TopText=All drivers are pre-installed on your computer when it leaves the MPC factory.  You do not need to re-install them unless you re-load your operating system or are experiencing technical difficulties. You must exit all other programs before installing these drivers.
SideText=NOTE: Only the devices that are detected in your system should appear.  If you do not see your device listed, please click on the 'Help' button below. //This installation may take several minutes to complete.  //Do not disturb the system during this time!

Driver1=Intel Audio Controller
Icon1=6
command1=Setup.exe -S -L0009 -F2c:\sound.log
Detect1=PCI\VEN_8086&DEV_24D5
SetupFolder1=.\
Reboot1=YES

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 0.79