[FONT] STANDARD=Arial,11,ANSI LISTVIEW=Arial,11,ANSI TITLE=Arial,16,ANSI,BOLD INFORMATION=Arial,11,ANSI,BOLD IPADDRESS=Arial,11,ANSI LINK=Arial,11,ANSI,NORMAL,UNDERLINE [BMP] LEFT=.\Files\Left.bmp LEFT_ICON=.\Files\Left_icon.bmp TOP=.\Files\Top.bmp TOP_ICON=.\Files\Top_icon.bmp [TITLE] SETUP=Wireless Adapter Setup NDIS=Select your network interface [BUTTON] OK=OK CANCEL=Cancel NEXT=&Next > PREV=< &Back YES=&Yes NO=N&o NO_=N&o FINISH=&Finish COMMIT=&Execute SEARCH=&Search USEDHCP=&Get IP Address Automatically NOTDHCP=&Assign IP Address SEARCHLIST=&Search CLOSE=&Close WELCOM_SX_01=Setup Wireless Adapter from PC by &wireless LAN WELCOM_SX_02=Setup Wireless Adapter by &USB memory WL_SETUP_N=Detailed &Config >> WL_SETUP_E=<< Easy C&onfig WL_SKIPWISET=S&kip wireless configuration [LABEL] ETHERNET=Ethernet Address IP_ADDRESS=IP Address MACHINE_NAME=Model Name PRINT= SCAN=SX Virtual Link DRIVE=Name TYPE=Type URL=http://www.silexamerica.com/us/support/faq/index.php SSID=SSID WIRELESSMODE=Wireless Mode BSSTYPE=Wireless Standard BSSID=BSSID RSSI=Signal Strength CHANNEL=Channel ACCESSPOINT=Access Point WIMODE_00=802.11a WIMODE_01=TURBO WIMODE_02=802.11b WIMODE_03=802.11g WIMODE_04=108g(MIMO) WIMODE_05=XR(eXtended Range) CODETYPE_00=None CODETYPE_01=WEP CODETYPE_02=WPA AES CODETYPE_03=WPA TKIP CODETYPE_04=WPA2 CODETYPE_05=WPA Auto BSSTYPE_01=Infrastructure BSSTYPE_02=AdHoc BSSTYPE_03=Auto [TEXT] LICENSE=LICENSE.txt [STATIC] WELCOM_01=Welcome to the Wireless Adapter Setup WELCOM_02=The Wireless Adapter Setup will configure the Wireless Adapter network settings.\n\nBefore you can communicate with the Wireless Adapter this computer's wireless settings need to match the settings on the Wireless Adapter. The following settings are the factory default settings for the Wireless Adapter. WELCOM_03=Wireless Mode\nSSID\nChannel\nWEP WELCOM_04=: 802.11 Ad hoc\n: GROUP\n: 11\n: None LICENSE_WIZ_MAIN=User License Agreement LICENSE_WIZ_SUB=Please read the agreement below. LICENSE_01=To read the entire agreement, use the [Page Down] key. LICENSE_02=Do you accept all terms of this agreement?\nIn order to use this Wireless Adapter Setup it is necessary that you accept this agreement. ETHERNET_WIZ_MAIN=Wireless Adapter Search ETHERNET_WIZ_SUB=Select the Wireless Adapter that you want to configure. ETHERNET_01=The Ethernet Ethernet address can be found on the back of the product. ETHERNET_02=&Ethernet Address: ETHERNET_03=Search &result overview: ETHERNET_04=If you can not see the Wireless Adapter in the search result list, please verify the wireless settings on this computer match those on the Wireless Adapter. TCP_WIZ_MAIN=Setting TCP/IP TCP_WIZ_SUB=Configure the desired Wireless Adapter TCP/IP settings. TCPIP_01=&IP Address TCPIP_02=&Subnet Mask TCPIP_03=&Default Gateway TCPIP_MEMO=If you select [Get IP Address Automatically], the DHCP server assigns an IP address to this product. If a DHCP server is not available, please manually assign an IP address. SETCON_WIZ_MAIN=Confirm Configuration Parameters SETCON_WIZ_SUB=The values entered are as follows: SETCON_01=Click [Execute] and the Settings will be sent. WIRELESS_WIZ_MAIN=Setting Wireless WIRELESS_WIZ_SUB=Configure the desired Wireless Adapter wireless settings. WL_MODE=Wireless &Mode: WL_SSID=&SSID: WL_CHANNEL=&Channel: WL_USE_WEP=Use &WEP: WL_WEP_KEY=WEP &Key: WL_AUTH=N&etwork Authentication: WL_KEYSIZE=Key &Size: WL_KEYINDEX=Key &Index: WL_ENC=Enc&ryption Mode: WL_PSK=&Pre-Shared Key: WL_MEMO=OldAdHoc (Ad hoc) is old style mode which is for PC to PC.\nAdHoc (802.11 Ad hoc) is now standard mode which is for PC to PC.\nInfrastructure is the mode using Access Point\nIf you use WEP, please set the WEP key as the hexadecimal code or ASCII string. INSTALL_WIZ_MAIN=The setup is complete INSTALL_WIZ_SUB=The Wireless Adapter wireless network setup is complete. INSTALL_01=The Wireless Adapter Setup is complete. Do you want to install the SX Virtual Link? INSTALL_02=The Wireless Adapter Setup is complete. The next step is to install either the SX Virtual Link. Please select the utility to install. COMPLETE_01=Wireless Adapter Setup is completed COMPLETE_02=The setup is complete. If your computer's wireless settings were changed to configure the Wireless Adapter, you can now restore the computer's wireless computer settings. COMPLETE_03=You may need to restart your computer for changes to take effect. COMPLETE_04=Please restart the computer. COMPLETE_05=All settings are completed. COMPLETE_06=Please restart this product. COMPLETE_07=If you proceed, SX Virtual Link can be installed. COMPLETE_08=Do you want to install SX Virtual Link? WELCOM_WIZ_MAIN=Change the Wireless LAN settings WELCOM_WIZ_SUB=Please change your PC's wireless LAN configuration. WELCOM_SX_01=Welcome to Wireless Adapter Setup WELCOM_SX_02=There are 2 ways for Wireless Adapter configuration, the one is that you can use your PC by wireless LAN to setup Wireless Adapter. The other one is that you can use USB memory to setup Wireless Adapter. WELCOM_SX_03=If a security software has been installed on your PC, the security software settings may need to be changed. For changing the settings, refer to our Support FAQ page in our WEB site for details. SETUSBMEM_WIZ_MAIN=Insert USB memory SETUSBMEM_WIZ_SUB=Please insert the USB memory into your PC. SETUSBMEM_01=It is possible to setup Wireless Adapter by using USB memory.\nIf you do not have USB memory, please back to previous screen by clicking "Back", and then please select "Setup Wireless Adapter from PC by wireless LAN" to setup Wireless Adapter.\n\nPlease insert USB memory into your PC's USB port. DRIVE_WIZ_MAIN=Select Drive DRIVE_WIZ_SUB=Please select the drive which is USB memory. DRIVE_01=&Drive: CHANGEUSB_01_WIZ_MAIN=Wireless Adapter configuration (1/3) CHANGEUSB_01_WIZ_SUB=Please insert your USB memory into the Wireless Adapter. CHANGEUSB_02_WIZ_MAIN=Wireless Adapter configuration (2/3) CHANGEUSB_02_WIZ_SUB=Transferring the data to the Wireless Adapter. CHANGEUSB_03_WIZ_MAIN=Wireless Adapter configuration (3/3) CHANGEUSB_03_WIZ_SUB=Please search the Wireless Adapter which was setup. CHANGEUSB_04_WIZ_MAIN=Wireless Adapter configuration CHANGEUSB_04_WIZ_SUB=The configuration data has been sent to the USB memory.\nFollow the procedures below to write the configuration to the product. CHANGEUSB01_01=The transferring data of USB memory was completed.\nPlease setup Wireless Adapter as follows. CHANGEUSB01_02=Please turn off Wireless Adapter. 3 LEDs are off. Please remove USB memory and insert to the Wireless Adapter. CHANGEUSB02_01=Please turn on Wireless Adapter. 3 LEDs are on when you turn on Wireless Adapter. CHANGEUSB02_02=The data will be transferred automatically into the Wireless Adapter.\nAfter 5 seconds, 3 LEDs are off to reboot the system of Wireless Adapter. CHANGEUSB02_03=And then 3 LEDs are on again, this means the setup was completed. Please remove the USB memory. CHANGEUSB03_01=Please confirm if Wireless Adapter is configured correctly. If the settings are successful, Wireless Adapter's LED is on or off correctly depends on the Wireless mode. CHANGEUSB03_02=If you confirm the Wireless Adapter's setting correctly, please click the "Search" button and confirm whether the Wireless Adapter appears or not. If there is no Wireless Adapter, it maybe not correctly configuration. Please make sure the configuration again. CHANGEUSB03_03=[Infrastructure mode] CHANGEUSB03_04=[Ad Hoc mode] SEARCHLIST=Searching Wireless Adapter CHANGEUSB04_01=Turn off the product. Remove the USB memory from your PC and insert it in the product. CHANGEUSB04_02=Turn on the product. The configuration data will be sent to the product from the USB memory. After about five seconds, all LEDs on the product will turn off. CHANGEUSB04_03=When all LEDs on the product turn on, the setup is complete. Remove the USB memory from the product. CHANGEUSB04_04=Please confirm if the product is configured correctly. Click the "Search" button and confirm whether the product appears or not. If the product does not appear, the product may not be configured correctly. Please try the setup again. NDIS_INFO=Please select your Wireless LAN card. NDIS_INIT=Stopping the WZC service... NDIS_WZCS=Changing the Wireless LAN configuration... NDIS_END=Starting the WZC service... SEARCH_SUPPORT=If the Ethernet Address is not detected, refer to the FAQ on our homepage. WL_APLIST=Select the wireless network (SSID of the access point or network device) that you wish to use. WL_NETKEY=Net&work Key: WL_NETKEY2=Con&firm Network Key: WL_SEARCHAP=Searching for Access Point... [MESSAGEBOX] QUIT_SETUP=Do you want to quit Setup? IP_ERROR=The IP address you entered is incorrect. INPUT=%s of input value is invalid. MAC_ERROR=Please select the Wireless Adapter DRIVE_ERR=Please select the drive DRIVENAME_ERR=Wrong drive name. DRIVE_DONT_WRITE=It failed to create the file to your selected drive. FIREWALL=When using this application, it needs to be added to the exceptions list of the Windows firewall.\nDo you want to add this application to the exceptions list? NOAP=Select the access point or enter the SSID at the Detailed Configuration screen. NETKEYERR=The network keys you entered for "Network Key" and "Confirm Network Key" do not match. Please enter the same network key into both fields. [RESULT] ITEM=Item VALUE=Value ENABLE=Enable DISABLE=Disable TCP=[TCP/IP] TCP_DHCP=DHCP TCP_IPADDR=IP Address TCP_SUBNETMASK=Subnet Mask TCP_GATEWAYADDR=Default Gateway WL=[Wireless] WL_MODE=Wireless Mode WL_SSID=SSID WL_CHANNEL=Channel WL_USE_WEP=WEP WL_WEP=WEP Key WL_AUTH=Network Authentication WL_KEYSIZE=Key Size WL_KEYINDEX=Key Index WL_ENC=Encryption Mode WL_PSK=Pre-Shared Key WL_ENABLE_WEP=Use WEP USBMEM=[USB Memory] DRIVE=Drive [COMBO] MODE_00=OldAdHoc MODE_01=AdHoc MODE_02=Infrastructure WEP_00=None WEP_01=64bits (ASCII string) WEP_02=64bits (16 hexadecimal) WEP_03=128bits (ASCII string) WEP_04=128bits (16 hexadecimal)Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.