[FONT] STANDARD=Arial,11,ANSI LISTVIEW=Arial,11,ANSI TITLE=Arial,16,ANSI,BOLD INFORMATION=Arial,11,ANSI,BOLD IPADDRESS=Arial,11,ANSI LINK=Arial,11,ANSI,NORMAL,UNDERLINE [BMP] LEFT=.\Files\Left.bmp LEFT_ICON=.\Files\Left_icon.bmp TOP=.\Files\Top.bmp TOP_ICON=.\Files\Top_icon.bmp [TITLE] SETUP=Wireless Dock Setup NDIS=Select your network interface [BUTTON] OK=OK CANCEL=Cancel NEXT=&Next > PREV=< &Back YES=&Yes NO=N&o NO_=N&o FINISH=&Finish COMMIT=&Execute SEARCH=&Search USEDHCP=&Get IP Address Automatically NOTDHCP=&Assign IP Address SEARCHLIST=&Search CLOSE=&Close WELCOM_SX_01=Setup Wireless Dock from PC by &wireless LAN WELCOM_SX_02=Setup Wireless Dock by &USB memory LINKPC_MYPC=&Use this computer LINKPC_PC=&Specify a computer to link [LABEL] ETHERNET=Ethernet Address IP_ADDRESS=IP Address MACHINE_NAME=Model Name PRINT= SCAN=Dock Link DRIVE=Name TYPE=Type [TEXT] LICENSE=LICENSE.txt [STATIC] WELCOM_01=Welcome to the Wireless Dock Setup WELCOM_02=The Wireless Dock Setup will configure the Wireless Dock network settings.\n\nBefore you can communicate with the Wireless Dock this computer's wireless settings need to match the settings on the Wireless Dock. The following settings are the factory default settings for the Wireless Dock. WELCOM_03=Wireless Mode\nSSID\nChannel\nWEP WELCOM_04=: 802.11 Ad hoc\n: GROUP\n: 11\n: None LICENSE_WIZ_MAIN=User License Agreement LICENSE_WIZ_SUB=Please read the agreement below. LICENSE_01=To read the entire agreement, use the [Page Down] key. LICENSE_02=Do you accept all terms of this agreement?\nIn order to use this Wireless Dock Setup it is necessary that you accept this agreement. ETHERNET_WIZ_MAIN=Wireless Dock Search ETHERNET_WIZ_SUB=Select the Wireless Dock that you want to configure. ETHERNET_01=The Ethernet Ethernet address can be found on the back of the product. ETHERNET_02=&Ethernet Address: ETHERNET_03=Search &result overview: ETHERNET_04=If you can not see the Wireless Dock in the search result list, please verify the wireless settings on this computer match those on the Wireless Dock. TCP_WIZ_MAIN=Setting TCP/IP TCP_WIZ_SUB=Configure the desired Wireless Dock TCP/IP settings. TCPIP_01=&IP Address TCPIP_02=&Subnet Mask TCPIP_03=&Default Gateway TCPIP_MEMO=If you select [Get IP Address Automatically], the DHCP server assigns an IP address to this product. If a DHCP server is not available, please manually assign an IP address. SETCON_WIZ_MAIN=Confirm Configuration Parameters SETCON_WIZ_SUB=The values entered are as follows: SETCON_01=Click [Execute] and the Settings will be sent. WIRELESS_WIZ_MAIN=Setting Wireless WIRELESS_WIZ_SUB=Configure the desired Wireless Dock wireless settings. WL_MODE=Wireless &Mode: WL_SSID=&SSID: WL_CHANNEL=&Channel: WL_USE_WEP=Use &WEP: WL_WEP_KEY=WEP &Key: WL_AUTH=N&etwork Authentication: WL_KEYSIZE=Key &Size: WL_KEYINDEX=Key &Index: WL_ENC=Enc&ryption Mode: WL_PSK=&Pre-Shared Key: WL_MEMO=OldAdHoc (Ad hoc) is old style mode which is for PC to PC.\nAdHoc (802.11 Ad hoc) is now standard mode which is for PC to PC.\nInfra. (Infrastructure) is the mode using Access Point\nIf you use WEP, please set the WEP key as the hexadecimal code or ASCII string. LINKPC_WIZ_MAIN=Computer setup LINKPC_WIZ_SUB=Configure the computer that will connect to Wireless Dock for iPod. LINKPC_01=Please set up the computer that will use iPod via the network. The specified computer will be connected when the link button on the Wireless Dock is pushed. LINKPC_02=Your computer name: LINKPC_03=&Computer to link: INSTALL_WIZ_MAIN=The setup is complete INSTALL_WIZ_SUB=The Wireless Dock wireless network setup is complete. INSTALL_01=The Wireless Dock setup is complete. Do you want to install the Dock Link? INSTALL_02=The Wireless Dock setup is complete. The next step is to install either the Dock Link. Please select the utility to install. COMPLETE_01=Wireless Dock Setup is completed COMPLETE_02=The setup is complete. If your computer's wireless settings were changed to configure the Wireless Dock, you can now restore the computer's wireless computer settings. COMPLETE_03=You may need to restart your computer for changes to take effect. COMPLETE_04=Please restart the computer. COMPLETE_05=All settings are completed. COMPLETE_06=All settings are completed. COMPLETE_07=If you proceed, Dock Link can be installed. COMPLETE_08=Do you want to install Dock Link? WELCOM_WIZ_MAIN=Change the Wireless LAN settings WELCOM_WIZ_SUB=Please change your PC's wireless LAN configuration. WELCOM_SX_01=Welcome to Wireless Dock Setup WELCOM_SX_02=Wireless Dock Setup will guide you through the steps necessary to configure your Wireless Dock. Please have your iPod ready, as it will be used for this configuration. WELCOM_SX_03=Wireless Dock can be configured using an iPod. Please connect the iPod to a USB port on your computer.\nYou will need to change the preferences in iTunes to [Enable disk use]. Please refer to iTunes Help for instructions on changing this setting. SETUSBMEM_WIZ_MAIN=Connect iPod SETUSBMEM_WIZ_SUB=Please connect an iPod to the computer. SETUSBMEM_01=Wireless Dock can be configured using an iPod. Please connect the iPod to a USB port on your computer.\n\n*You will need to change the preferences in iTunes to [Enable disk use]. Please refer to iTunes Help for instructions on changing this setting. DRIVE_WIZ_MAIN=Select iPod DRIVE_WIZ_SUB=Please select your iPod. DRIVE_01=&Drive: CHANGEUSB_01_WIZ_MAIN=Wireless Dock configuration (1/3) CHANGEUSB_01_WIZ_SUB=Please insert your USB memory into the Wireless Dock. CHANGEUSB_02_WIZ_MAIN=Wireless Dock configuration (2/3) CHANGEUSB_02_WIZ_SUB=Transferring the data to the Wireless Dock. CHANGEUSB_03_WIZ_MAIN=Wireless Dock configuration (3/3) CHANGEUSB_03_WIZ_SUB=Please search the Wireless Dock which was setup. CHANGEUSB_04_WIZ_MAIN=Configuration upload CHANGEUSB_04_WIZ_SUB=Configuration information was successfully transferred to the iPod.\nPlease upload this information to the Wireless Dock by following the procedure below. CHANGEUSB01_01=The transferring data of USB memory was completed.\nPlease setup Wireless Dock as follows. CHANGEUSB01_02=Please turn off Wireless Dock. 3 LEDs are off. Please remove USB memory and insert to the Wireless Dock. CHANGEUSB02_01=Please turn on Wireless Dock. 3 LEDs are on when you turn on Wireless Dock. CHANGEUSB02_02=The data will be transferred automatically into the Wireless Dock.\nAfter 5 seconds, 3 LEDs are off to reboot the system of Wireless Dock. CHANGEUSB02_03=And then 3 LEDs are on again, this means the setup was completed. Please remove the USB memory. CHANGEUSB03_01=Please confirm if Wireless Dock is configured correctly. If the settings are successful, Wireless Dock's LED is on or off correctly depends on the Wireless mode. CHANGEUSB03_02=If you confirm the Wireless Dock's setting correctly, please click the "Search" button and confirm whether the Wireless Dock appears or not. If there is no Wireless Dock, it maybe not correctly configuration. Please make sure the configuration again. CHANGEUSB03_03=[Infrastructure mode] CHANGEUSB03_04=[Ad Hoc mode] SEARCHLIST=Searching Wireless Dock CHANGEUSB04_01=Turn off the Wireless Dock. Disconnect your iPod from the computer and connect it to the Wireless Dock. CHANGEUSB04_02=Turn on the Wireless Dock. The configuration information will be uploaded from your iPod. When the transfer completes, the Wireless Dock's LED light will turn off. CHANGEUSB04_03=Configuration is complete when LED on Wireless Dock starts flashing. CHANGEUSB04_04=Please confirm if the product is configured correctly. Click the [Search] button and confirm whether the product appears or not. If the product does not appear, the product may not be configured correctly. Please try the setup again. NDIS_INFO=Please select your Wireless LAN card. NDIS_INIT=Stopping the WZC service... NDIS_WZCS=Changing the Wireless LAN configuration... NDIS_END=Starting the WZC service... [MESSAGEBOX] QUIT_SETUP=Do you want to quit Setup? IP_ERROR=The IP address you entered is incorrect. INPUT=%s of input value is invalid. MAC_ERROR=Please select the Wireless Dock DRIVE_ERR=Please select the drive DRIVENAME_ERR=Wrong drive name. DRIVE_DONT_WRITE=It failed to create the file to your selected drive. FIREWALL=When using this application, it needs to be added to the exceptions list of the Windows firewall.\nDo you want to add this application to the exceptions list? [RESULT] ITEM=Item VALUE=Value ENABLE=Enable DISABLE=Disable TCP=[TCP/IP] TCP_DHCP=DHCP TCP_IPADDR=IP Address TCP_SUBNETMASK=Subnet Mask TCP_GATEWAYADDR=Default Gateway WL=[Wireless] WL_MODE=Wireless Mode WL_SSID=SSID WL_CHANNEL=Channel WL_USE_WEP=WEP WL_WEP=WEP Key WL_AUTH=Network Authentication WL_KEYSIZE=Key Size WL_KEYINDEX=Key Index WL_ENC=Encryption Mode WL_PSK=Pre-Shared Key WL_ENABLE_WEP=Use WEP USBMEM=[iPod] DRIVE=Drive LINK=[User settings] LINK_NAME=Computer to link [COMBO] MODE_00=OldAdHoc MODE_01=AdHoc MODE_02=Infra. WEP_00=None WEP_01=64bits (ASCII string) WEP_02=64bits (16 hexadecimal) WEP_03=128bits (ASCII string) WEP_04=128bits (16 hexadecimal)Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.