1. stitchlink_install.zip Driver
2. Message.ini File Contents

Message.ini Driver File Contents (stitchlink_install.zip)

[FONT]
STANDARD=Arial,11,ANSI
LISTVIEW=Arial,11,ANSI
TITLE=Arial,16,ANSI,BOLD
INFORMATION=Arial,11,ANSI,BOLD
IPADDRESS=Arial,11,ANSI
LINK=Arial,11,ANSI,NORMAL,UNDERLINE

[BMP]
LEFT=.\Files\Left.bmp
LEFT_ICON=.\Files\Left_icon.bmp
TOP=.\Files\Top.bmp
TOP_ICON=.\Files\Top_icon.bmp

[TITLE]
SETUP=StitchLink Setup

[BUTTON]
OK=OK
CANCEL=Cancel
NEXT=&Next >
PREV=< &Back
YES=&Yes
NO=N&o
NO_=N&o
FINISH=&Finish
COMMIT=&Execute
SEARCH=&Search
USEDHCP=&Get IP Address Automatically
NOTDHCP=&Assign IP Address
SEARCHLIST=&Search...
CLOSE=&Close
WELCOM_SX_01=Setup StitchLink from PC by &wireless LAN
WELCOM_SX_02=Setup StitchLink by &USB memory

[LABEL]
ETHERNET=Ethernet Address
IP_ADDRESS=IP Address
MACHINE_NAME=Model Name
PRINT=&JC-Print2002
SCAN=&SX Virtual Link
DRIVE=Name
TYPE=Type
URL=http://www.silexamerica.com/us/index.html

[TEXT]
LICENSE=LICENSE.txt

[STATIC]
WELCOM_01=Welcome to the StitchLink Setup
WELCOM_02=The StitchLink Setup will configure the StitchLink network settings.\n\nBefore you can communicate with the StitchLink this computer's wireless settings need to match the settings on the StitchLink. The following settings are the factory default settings for the StitchLink.
WELCOM_03=Wireless Mode\nSSID\nChannel\nWEP
WELCOM_04=: 802.11 Ad hoc\n: GROUP\n: 11\n: None

LICENSE_WIZ_MAIN=User License Agreement
LICENSE_WIZ_SUB=Please read the agreement below.
LICENSE_01=To read the entire agreement, use the [Page Down] key.
LICENSE_02=Do you accept all terms of this agreement?\nIn order to use this StitchLink Setup it is necessary that you accept this agreement.

ETHERNET_WIZ_MAIN=StitchLink Search
ETHERNET_WIZ_SUB=Select the StitchLink that you want to configure.
ETHERNET_01=The Ethernet Ethernet address can be found on the back of the product.
ETHERNET_02=&Ethernet Address:
ETHERNET_03=Search &result overview:
ETHERNET_04=If you can not see the StitchLink in the search result list, please verify the wireless settings on this computer match those on the StitchLink.

TCP_WIZ_MAIN=Setting TCP/IP
TCP_WIZ_SUB=Configure the desired StitchLink TCP/IP settings.
TCPIP_01=&IP Address
TCPIP_02=&Subnet Mask
TCPIP_03=&Default Gateway

SETCON_WIZ_MAIN=Confirm Configuration Parameters
SETCON_WIZ_SUB=The values entered are as follows:
SETCON_01=Click [Execute] and the Settings will be sent.

WIRELESS_WIZ_MAIN=Setting Wireless
WIRELESS_WIZ_SUB=Configure the desired StitchLink wireless settings.
WL_MODE=Wireless &Mode:
WL_SSID=&SSID:
WL_CHANNEL=&Channel:
WL_USE_WEP=Setting &WEP:
WL_WEP_KEY=WEP &Key:
WL_MEMO=OldAdHoc (Ad hoc) is old style mode which is for PC to PC.\nAdHoc (802.11 Ad hoc) is now standard mode which is for PC to PC.\nInfra. (Infrastructure) is the mode using Access Point.\nIf you use WEP, please set the WEP key as the hexadecimal code or ASCII string.

INSTALL_WIZ_MAIN=The setup is complete
INSTALL_WIZ_SUB=The StitchLink wireless network setup is complete.
INSTALL_01=
INSTALL_02=The StitchLink setup is complete. Do you want to install the SX Virtual Link?

COMPLETE_01=StitchLink Setup is complete
COMPLETE_02=The setup is complete.  If your computer's wireless settings were changed to configure the StitchLink, you can now restore the computer's wireless computer settings.
COMPLETE_03=You may need to restart your computer for changes to take effect.
COMPLETE_04=Please restart the computer.
COMPLETE_05=All settings are completed.

WELCOM_WIZ_MAIN=Change the Wireless LAN settings
WELCOM_WIZ_SUB=Please change your PC's wireless LAN configuration.

WELCOM_SX_01=Welcome to StitchLink Setup
WELCOM_SX_02=StitchLink Setup is proceeding for necessary settings to use StitchLink. There are 2 ways for StitchLink configuration, the one is that you can use your PC by wireless LAN to setup StitchLink. The other one is that you can use USB memory to setup StitchLink.
WELCOM_SX_03=If a security software has been installed on your PC, the security software settings may need to be changed. For changing the settings, refer to our Support FAQ page in our WEB site for details.

SETUSBMEM_WIZ_MAIN=Insert USB memory
SETUSBMEM_WIZ_SUB=Please insert the USB memory into your PC.
SETUSBMEM_01=It is possible to setup StitchLink by using USB memory.\nIf you do not have USB memory, please back to previous screen by clicking "Back", and then please select "Setup StitchLink from PC by wireless LAN" to setup StitchLink.\n\nPlease insert USB memory into your PC's USB port.

DRIVE_WIZ_MAIN=Select Drive
DRIVE_WIZ_SUB=Please select the drive which is USB memory.
DRIVE_01=&Drive

CHANGEUSB_01_WIZ_MAIN=StitchLink configuration (1/3)
CHANGEUSB_01_WIZ_SUB=Please insert your USB memory into the StitchLink.

CHANGEUSB_02_WIZ_MAIN=StitchLink configuration (2/3)
CHANGEUSB_02_WIZ_SUB=Transferring the data to the StitchLink.

CHANGEUSB_03_WIZ_MAIN=StitchLink configuration (3/3)
CHANGEUSB_03_WIZ_SUB=Please search the StitchLink which was setup.

CHANGEUSB01_01=The transferring data of USB memory was completed.\nPlease setup StitchLink as follows.
CHANGEUSB01_02=Please turn off StitchLink. 3 LEDs are off. Please remove USB memory and insert to the StitchLink.

CHANGEUSB02_01=Please turn on StitchLink. 3 LEDs are on when you turn on StitchLink.
CHANGEUSB02_02=The data will be transferred automatically into the StitchLink.\nAfter 5 seconds, 3 LEDs are off to reboot the system of StitchLink.
CHANGEUSB02_03=And then 3 LEDs are on again, this means the setup was completed. Please remove the USB memory.

CHANGEUSB03_01=Please confirm if StitchLink is configured correctly. If the settings are successful, StitchLink's LED is on or off correctly depends on the Wireless mode.
CHANGEUSB03_02=If you confirm the StitchLink's setting correctly, please click the "Search" button and confirm whether the StitchLink appears or not. If there is no StitchLink, it maybe not correctly configuration. Please make sure the configuration again.
CHANGEUSB03_03=[Infrastructure mode]
CHANGEUSB03_04=[Ad Hoc mode]
SEARCHLIST=Searching StitchLink

[MESSAGEBOX]
QUIT_SETUP=Do you want to quit Setup?
IP_ERROR=Invalid IP Address.
INPUT=%s of input value is invalid.
MAC_ERROR=Please select the StitchLink
DRIVE_ERR=Please select the drive
DRIVENAME_ERR=Wrong drive name.
DRIVE_DONT_WRITE=It failed to create the file to your selected drive.
USER_CHANGE=Another user is already using StitchLink Setup.\nStitchLink Setup will be closed.
FIREWALL=When using this application, it needs to be added to the exceptions list of the Windows firewall.\nDo you want to add this application to the exceptions list?

[RESULT]
ITEM=Item
VALUE=Value
ENABLE=Enable
DISABLE=Disable
TCP=[TCP/IP]
TCP_DHCP=DHCP
TCP_IPADDR=IP Address
TCP_SUBNETMASK=Subnet Mask
TCP_GATEWAYADDR=Default Gateway
WL=[Wireless]
WL_MODE=Wireless Mode
WL_SSID=SSID
WL_CHANNEL=Channel
WL_USE_WEP=WEP
WL_WEP=WEP Key
USBMEM=[USB Memory]
DRIVE=Drive

[COMBO]
MODE_00=OldAdHoc
MODE_01=AdHoc
MODE_02=Infra.
WEP_00=None
WEP_01=64 bits(ASCII string)
WEP_02=64 bits(16 hexadecimal)
WEP_03=128 bits(ASCII string)
WEP_04=128 bits(16 hexadecimal)