;; elmegUsb.inf ;--------- Version Section --------------------------------------------------- [Version] Signature="$Windows 95$" Provider=%ProviderName% DriverVer=12/20/2007,1.0.3.7 ; DriverVer=mm/dd/yyyy,x.x.x.x ; If device fits one of the standard classes, use the name and GUID here, ; otherwise create your own device class and GUID as this example shows. Class=%DeviceClassName% ClassGUID={E7987250-78D6-11d4-92C6-005004681409} ;--------- SourceDiskNames and SourceDiskFiles Section ----------------------- ; These sections identify source disks and files for installation. They are ; shown here as an example, but commented out. [SourceDisksNames] 1 = "Install Disk",ElgTaDrv.sys,, [SourceDisksFiles] ElgTaDrv.sys = 1,, ;--------- ClassInstall/ClassInstall32 Section ------------------------------- ; Not necessary if using a standard class ; 9X Style [ClassInstall] Addreg=Class_AddReg ; NT Style [ClassInstall32] Addreg=Class_AddReg [Class_AddReg] HKR,,,,%DeviceClassName% HKR,,Icon,HEX,00,00 ;--------- DestinationDirs Section ------------------------------------------- [DestinationDirs] ElgTaDrv_Files_Driver = 10,System32\Drivers ;--------- Manufacturer and Models Sections ---------------------------------- [Manufacturer] %MfgName%=Mfg0 [Mfg0] ; This VID/PID is used by the elmeg C320 in BOOT Loader Mode %USB\VID_07E2&PID_0300.DeviceDesc%=ElgTaDrv_DDI, USB\VID_07E2&PID_0300 %USB\VID_2018&PID_0300.DeviceDesc%=ElgTaDrv_DDI, USB\VID_2018&PID_0300 ; These devices are bound to the elmeg USB System driver. ; ; D@vos 24/44 %USB\VID_07E2&PID_0201.DeviceDesc%=ElgTaDrv_DDI, USB\VID_07E2&PID_0201 %USB\VID_2018&PID_0201.DeviceDesc%=ElgTaDrv_DDI, USB\VID_2018&PID_0201 ; D@vos net %USB\VID_07E2&PID_0203.DeviceDesc%=ElgTaDrv_DDI, USB\VID_07E2&PID_0203 %USB\VID_2018&PID_0203.DeviceDesc%=ElgTaDrv_DDI, USB\VID_2018&PID_0203 ; CS320. %USB\VID_07E2&PID_0301.DeviceDesc%=ElgTaDrv_DDI, USB\VID_07E2&PID_0301 %USB\VID_2018&PID_0301.DeviceDesc%=ElgTaDrv_DDI, USB\VID_2018&PID_0301 ; CS410. %USB\VID_07E2&PID_0301&Rev_0200.DeviceDesc%=ElgTaDrv_DDI, USB\VID_07E2&PID_0301&Rev_0200 %USB\VID_2018&PID_0301&Rev_0200.DeviceDesc%=ElgTaDrv_DDI, USB\VID_2018&PID_0301&Rev_0200 ; CS410U. %USB\VID_07E2&PID_0301&Rev_0300.DeviceDesc%=ElgTaDrv_DDI, USB\VID_07E2&PID_0301&Rev_0300 %USB\VID_2018&PID_0301&Rev_0300.DeviceDesc%=ElgTaDrv_DDI, USB\VID_2018&PID_0301&Rev_0300 ; elmeg.net %USB\VID_07E2&PID_0401.DeviceDesc%=ElgTaDrv_DDI, USB\VID_07E2&PID_0401 %USB\VID_2018&PID_0401.DeviceDesc%=ElgTaDrv_DDI, USB\VID_2018&PID_0401 ; elmeg.net ;%USB\VID_07E2&PID_0401.DeviceDesc%=ElgTaDrv_DDI, USB\VID_07E2&PID_0401&Rev_0100 ;%USB\VID_2018&PID_0401.DeviceDesc%=ElgTaDrv_DDI, USB\VID_2018&PID_0401&Rev_0100 ; elmeg.ICT boot %USB\VID_07E2&PID_0401&Rev_0101.DeviceDesc%=ElgTaDrv_DDI, USB\VID_07E2&PID_0401&Rev_0101 %USB\VID_2018&PID_0401&Rev_0101.DeviceDesc%=ElgTaDrv_DDI, USB\VID_2018&PID_0401&Rev_0101 ; elmeg.P2001 BOOT elmeg %USB\VID_07E2&PID_0401&Rev_9999.DeviceDesc%=ElgTaDrv_DDI, USB\VID_07E2&PID_0401&Rev_9999 %USB\VID_2018&PID_0401&Rev_9999.DeviceDesc%=ElgTaDrv_DDI, USB\VID_2018&PID_0401&Rev_9999 ;---------- DDInstall Sections ----------------------------------------------- ; --------- Windows 9X ----------------- ; elmeg USB Driver ; [ElgTaDrv_DDI] CopyFiles=ElgTaDrv_Files_Driver AddReg=ElgTaDrv_9X_AddReg [ElgTaDrv_9X_AddReg] HKR,,DevLoader,,*ntkern HKR,,NTMPDriver,,ElgTaDrv.sys HKR, "Parameters", "BreakOnEntry", 0x00010001, 0 ; --------- Windows NT ----------------- ; ; elmeg USB Driver ; [ElgTaDrv_DDI.NT] CopyFiles=ElgTaDrv_Files_Driver AddReg=ElgTaDrv_NT_AddReg [ElgTaDrv_DDI.NT.Services] Addservice = ElgTaDrv, 0x00000002, ElgTaDrv_AddService [ElgTaDrv_AddService] DisplayName = %SvcDesc% ServiceType = 1 ; SERVICE_KERNEL_DRIVER StartType = 3 ; SERVICE_DEMAND_START ErrorControl = 1 ; SERVICE_ERROR_NORMAL ServiceBinary = %10%\System32\Drivers\ElgTaDrv.sys [ElgTaDrv_NT_AddReg] HKLM, "System\CurrentControlSet\Services\ElgTaDrv\Parameters",\ "BreakOnEntry", 0x00010001, 0 ; --------- Files (common) ------------- [ElgTaDrv_Files_Driver] ElgTaDrv.sys ;--------- Strings Section --------------------------------------------------- [Strings] ProviderName="Funkwerk" MfgName="Funkwerk" ; USB\VID_07E2&PID_0300.DeviceDesc="elmeg CS320 BootUp" USB\VID_2018&PID_0300.DeviceDesc="elmeg CS320 BootUp" USB\VID_07E2&PID_0401&Rev_9999.DeviceDesc="elmeg Firmware Update Device" USB\VID_2018&PID_0401&Rev_9999.DeviceDesc="elmeg Firmware Update Device" ; USB\VID_07E2&PID_0201.DeviceDesc="elmeg D@VOS" USB\VID_2018&PID_0201.DeviceDesc="elmeg D@VOS" USB\VID_07E2&PID_0203.DeviceDesc="elmeg D@VOS.net" USB\VID_2018&PID_0203.DeviceDesc="elmeg D@VOS.net" USB\VID_07E2&PID_0301.DeviceDesc="elmeg CS320" USB\VID_2018&PID_0301.DeviceDesc="elmeg CS320" USB\VID_07E2&PID_0301&Rev_0200.DeviceDesc="CS410" USB\VID_2018&PID_0301&Rev_0200.DeviceDesc="CS410" USB\VID_07E2&PID_0301&Rev_0300.DeviceDesc="CS410U" USB\VID_2018&PID_0301&Rev_0300.DeviceDesc="CS410U" USB\VID_07E2&PID_0401.DeviceDesc="elmeg.net" USB\VID_2018&PID_0401.DeviceDesc="elmeg.net" USB\VID_07E2&PID_0401&Rev_0101.DeviceDesc="elmeg ICT" USB\VID_2018&PID_0401&Rev_0101.DeviceDesc="elmeg ICT" USB\VID_07E2&PID_0401&Rev_9999.DeviceDesc="elmeg P2001-Boot" USB\VID_2018&PID_0401&Rev_9999.DeviceDesc="elmeg P2001-Boot" ; DeviceClassName="Funkwerk USB" SvcDesc="Funkwerk USB Device Driver"Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.