1. C200data-Modemtreiber.zip Driver
  2. mdmec200.inf File Contents

mdmec200.inf Driver File Contents (C200data-Modemtreiber.zip)

; Windows Modem Setup File
; Copyright (c) 1993-1995 Microsoft Corporation
; Manufacturer:   Elmeg
; Date:           11.05.99

[Version]
Signature="$CHICAGO$"
Class=Modem
Provider=%Mfg%

[ControlFlags]
ExcludeFromSelect=DummyModem
ExcludeFromSelect=612PnPModeX75
ExcludeFromSelect=612PnPModePPP
ExcludeFromSelect=612PnPModeV120
ExcludeFromSelect=612PnPModeAB

[Manufacturer]
%Mfg% = Models

[Modem1.NoResDup]
UNIMODEM17FFE726

[Modem2.NoResDup]
UNIMODEM17FFE726

[Modem3.NoResDup]
UNIMODEM17FFE726

[Modem4.NoResDup]
UNIMODEM17FFE726


; Modem models

[Models]
%ModemDummy% = ModemDummy,               DummyModem       ; DummyModem für automatische Modeminstallation

%Modem1%    = Modem1, 612ModeX75,      UNIMODEM17FFE726 ; ELINK 612          X.75
%Modem1PnP% = Modem1, 612PnPModeX75,   SERENUM\EEH3612  ; ELINK 612          X.75
%Modem2%    = Modem2, 612ModePPP,      UNIMODEM17FFE726 ; ELINK 612          PPP/HDLC
%Modem2PnP% = Modem2, 612PnPModePPP,   SERENUM\EEH3612  ; ELINK 612          PPP/HDLC
%Modem3%    = Modem3, 612ModeV120,     UNIMODEM17FFE726 ; ELINK 612          V.120
%Modem3PnP% = Modem3, 612PnPModeV120,  SERENUM\EEH3612  ; ELINK 612          V.120
%Modem4%    = Modem4, 612ModeAB,       UNIMODEM17FFE726 ; ELINK 612          Wahlhilfe
%Modem4PnP% = Modem4, 612PnPModeAB,    SERENUM\EEH3612  ; ELINK 612          Wahlhilfe



; Installation sections

[ModemDummy] ; DummyModem
AddReg=All, MfgAddReg, Modem1.AddReg

[Modem1]	; ELINK 612 X.75
AddReg=All, MfgAddReg, Modem1.AddReg, ModeX75

[Modem2]	; ELINK 612 PPP/HDLC
AddReg=All, MfgAddReg, Modem1.AddReg, ModePPP

[Modem3]	; ELINK 612 V.120
AddReg=All, MfgAddReg, Modem1.AddReg, ModeV120

[Modem4]	; ELINK 612 Wahlhilfe
AddReg=All, MfgAddReg, Modem2.AddReg


; AddReg sections

[Modem1.AddReg]	; ELINK 612 ISDN TA
HKR,, DeviceType, 1, 01      ; External
HKR,, Properties, 1, c0,01,00,00, 64,00,00,00, ff,00,00,00, 07,00,00,00, 0f,00,00,00, 37,01,00,00, 00,c2,01,00, 00,fa,00,00
HKR, Init,      4,, "AT V1 \V1 X2 &D2<cr>"
HKR, Settings, ErrorControl_On,, "&B49"
HKR, Settings, ErrorControl_Off,, "&B49"
HKR, Settings, ErrorControl_Forced,, "&B49"
HKR, Settings, CallSetupFailTimer,, "S7=<#>"
HKR, Settings, InactivityTimeout,, "S30=<#>"
HKR, Settings, Compression_On,, "%%C1"
HKR, Settings, Compression_Off,, "%%C0"

[Modem2.AddReg] ; ELINK 612 Wahlhilfe
HKR,, DeviceType, 1, 01      ; External
HKR,, Properties, 1, 00,00,00,00, 00,00,00,00, 00,00,00,00, 00,00,00,00, 00,00,00,00, 00,00,00,00, 00,C2,01,00, 00,FA,00,00
HKR, Init,      3,, "AT &B30 X0<cr>"
HKR, Settings, ErrorControl_On,,
HKR, Settings, ErrorControl_Off,,
HKR, Settings, ErrorControl_Forced,,
HKR, Settings, FlowControl_Off,,
HKR, Settings, FlowControl_Hard,,
HKR, Settings, FlowControl_Soft,,
HKR, Settings, SpeakerMode_Off,,
HKR, Settings, SpeakerMode_Dial,,
HKR, Settings, SpeakerMode_On,,
HKR, Settings, SpeakerMode_Setup,,

; User visible strings

[Strings]
ClassName = "Modem"
Mfg = "elmeg Kommunikationstechnik"

; Model strings
ModemDummy ="ElmegC200Dummy100"
Modem1 ="elmeg C200  X.75"
Modem2 ="elmeg C200  PPP"
Modem3 ="elmeg C200  V.120"
Modem4 ="elmeg C200  Wahlhilfe"

; Plug & Play
Modem1PnP ="elmeg C200  Plug&Play X.75"
Modem2PnP ="elmeg C200  Plug&Play PPP"
Modem3PnP ="elmeg C200  Plug&Play V.120"
Modem4PnP ="elmeg C200  Plug&Play Wahlhilfe"


[All]
HKR,,FriendlyDriver,,unimodem.vxd
HKR,,DevLoader,,*vcomm
HKR,,PortSubClass,1,02
HKR,,ConfigDialog,,modemui.dll
HKR,,EnumPropPages,,"modemui.dll,EnumPropPages"
HKR, Init,      1,, "AT<cr>"
HKR, Responses, "<cr><lf>OK<cr><lf>", 1, 00, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>ERROR<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00
HKR,, "InfVersion",, "1.00"


[ModeX75]
HKR,, "UserInit",, "&B49"

[ModePPP]
HKR,, "UserInit",, "&B54\P1"

[ModeV120]
HKR,, "UserInit",, "&B55"


[EXTERNAL]
HKR,, DeviceType, 1, 01

[MfgAddReg]
HKR,, InactivityScale, 01,00,00,00
HKR, Init,      2,, "AT &F<cr>"
HKR, Monitor,   1,, "None"
HKR, Hangup,    1,, "ATH<cr>"
HKR, Answer,    1,, "ATA<cr>"
HKR,, Reset,, "ATZ<cr>"
HKR, Settings, Prefix,, "AT"
HKR, Settings, Terminator,, "<cr>"
HKR, Settings, DialPrefix,, "D"
HKR, Settings, DialSuffix,, 
HKR, Settings, SpeakerVolume_Low,, 
HKR, Settings, SpeakerVolume_Med,, 
HKR, Settings, SpeakerVolume_High,, 
HKR, Settings, SpeakerMode_Off,, "M0"
HKR, Settings, SpeakerMode_Dial,, "M1"
HKR, Settings, SpeakerMode_On,, "M2"
HKR, Settings, SpeakerMode_Setup,, "M3"
HKR, Settings, FlowControl_Off,, "\Q0"
HKR, Settings, FlowControl_Hard,, "\Q3"
HKR, Settings, FlowControl_Soft,, "\Q1"
HKR, Settings, Modulation_CCITT,, 
HKR, Settings, Modulation_Bell,, 
HKR, Settings, SpeedNegotiation_Off,, 
HKR, Settings, SpeedNegotiation_On,, 
HKR, Settings, Pulse,, 
HKR, Settings, Tone,, 
HKR, Settings, Blind_Off,, 
HKR, Settings, Blind_On,, 
HKR, Settings, CallSetupFailTimer,, 
HKR, Settings, InactivityTimeout,, 
HKR, Fax, Class1DTESpeed,, "AUTO"

HKR, Responses, "<cr><lf>OK<cr><lf>",          1, 00, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>RING<cr><lf>",        1, 08, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>NO CARRIER<cr><lf>",  1, 04, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>ERROR<cr><lf>",       1, 03, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>NO DIALTONE<cr><lf>", 1, 05, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>BUSY<cr><lf>",        1, 06, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>NO ANSWER<cr><lf>",   1, 07, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>NO USER RESPONDING<cr><lf>", 1, 03, 00, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT<cr><lf>", 1, 02, 02, 00,00,00,00, 00,00,00,00

HKR, Responses, "<cr><lf>CONNECT 19200<cr><lf>", 1, 02, 02, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 38400<cr><lf>", 1, 02, 02, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 57600<cr><lf>", 1, 02, 02, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 64000<cr><lf>", 1, 02, 02, 00,00,00,00, 00,00,00,00
HKR, Responses, "<cr><lf>CONNECT 115200<cr><lf>", 1, 02, 02, 00,00,00,00, 00,00,00,00
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

Copyright © 1996 - 2024 DriverGuide is an iCentric Corporation Company.    All rights reserved.
Privacy Policy
server: web4, load: 0.66