EN_HWSetupStr.ini Driver File Contents (sp105tutilsx.exe)

ÿþ[Message]

BOOT_1234=FDD->HDD->CD/DVD->LAN

BOOT_1243=FDD->HDD->LAN->CD/DVD

BOOT_1324=FDD->CD/DVD->HDD->LAN

BOOT_1342=FDD->CD/DVD->LAN->HDD

BOOT_1423=FDD->LAN->HDD->CD/DVD

BOOT_1432=FDD->LAN->CD/DVD->HDD

BOOT_2134=HDD->FDD->CD/DVD->LAN

BOOT_2143=HDD->FDD->LAN->CD/DVD

BOOT_2314=HDD->CD/DVD->FDD->LAN

BOOT_2341=HDD->CD/DVD->LAN->FDD

BOOT_2413=HDD->LAN->FDD->CD/DVD

BOOT_2431=HDD->LAN->CD/DVD->FDD

BOOT_3124=CD/DVD->FDD->HDD->LAN

BOOT_3142=CD/DVD->FDD->LAN->HDD

BOOT_3214=CD/DVD->HDD->FDD->LAN

BOOT_3241=CD/DVD->HDD->LAN->FDD

BOOT_3412=CD/DVD->LAN->FDD->HDD

BOOT_3421=CD/DVD->LAN->HDD->FDD

BOOT_4123=LAN->FDD->HDD->CD/DVD

BOOT_4132=LAN->FDD->CD/DVD->HDD

BOOT_4213=LAN->HDD->FDD->CD/DVD

BOOT_4231=LAN->HDD->CD/DVD->FDD

BOOT_4312=LAN->CD/DVD->FDD->HDD

BOOT_4321=LAN->CD/DVD->HDD->FDD



APPNAME_HWSETUP=hwsetup

TITLE_HWSETUP=TOSHIBA HWSetup

ADMIN_AUTHORITY=You do not have Administrator authority.



IDOK=Closes the dialog box and saves any changes you have made.

IDCANCEL=Closes the dialog box without saving any changes you have made.

ID_APPLY_NOW=Saves all the changes you have made without closing the dialog box.

CPL_NAME=TOSHIBA HWSetup

CPL_DESCRIPTION=Provides configuration Hardware settings



PW_REGISTERED1=The password was registered.

PW_REGISTERED2=Even if you push the Cancel button, the setting is not restored.

PW_NOTREGISTERED1=The password was deleted.

PW_NOTREGISTERED2=Even if you push the Cancel button, the setting is not restored.

PW_ENTRY_ERR=Entry Error!!!

PW_INCORRECT_PASSWD=Incorrect Password.

PW_OVER_COUNT=Sorry, access denied!!! Powering off your machine then powering it back on again are required to regain access.



SHT_RESTRICTION=Wrong Supervisor Password! HWSetup starts with restriction.

SHT_ASKREBOOT=The changes will take effect next time the machine is rebooted. Reboot the machine now?

IDC_EDIT_ENTER=The character string you enter is displayed as a string of asterisks.

IDC_EDIT_VERIFY=The character string you enter is displayed as a string of asterisks.



IDC_BTN_GN_DEFAULT=Returns all options to the factory settings.

IDC_BTN_GN_ABOUT=Displays information about TOSHIBA Hardware Setup Utility.

IDC_GN_VERSION_RESULT=Displays the current version and date of the computer's Basic Input/Output System (BIOS). This information is useful if you have to call for troubleshooting assistance.



IDC_PW_RDO_COMMON_NO=Resets the user password for power on.

IDC_PW_RDO_COMMON_YES=Sets the user password for power on.

IDC_PW_EDIT_OWNER=Define your owner string which is displayed at power-up time along with the "Enter Password [     ]" prompt when there is a registered password. The maximum length of the owner string is 512 characters long.



IDC_DP_RDO_AUTO=If an external monitor is connected to the computer during a hard boot, the Auto-Selected option will select the external monitor while turning off the internal LCD.

IDC_DP_RDO_BOTH=Uses both the internal LCD and external monitor for simultaneous display.



IDC_BT_COMBO_PRIORITY=The computer looks for bootable files in the selected order.

IDC_BT_RDO_PXE=Use PXE protocol when booting from network.

IDC_BT_RDO_RPL=Use RPL protocol when booting from network.



IDC_KB_RDO_ENABLED=Enables the Wake-up on Keyboard. This function effects only for the built-in keyboard and only from standby mode.

IDC_KB_RDO_DISABLED=Disables the Wake-up on Keyboard.



IDC_USB_RDO_ENABLED=Enables the KB/Mouse/FDD Legacy Emulation. If your operating system does not support USB, you can still use a USB mouse and keyboard and FDD.

IDC_USB_RDO_DISABLED=Disables the KB/Mouse/FDD Legacy Emulation.



IDC_LAN_RDO_ENABLED=Enables the Built-in LAN.

IDC_LAN_RDO_DISABLED=Disables the Built-in LAN.



[Tab]

General=General

Password=Password

Display=Display

Boot Priority=Boot Priority

Keyboard=Keyboard

USB=USB

LAN=LAN



[Window]

IDC_GN_VERSION=BIOS Version:

IDC_GN_SETUP=Setup

IDC_BTN_GN_DEFAULT=Default

IDC_BTN_GN_ABOUT=About

IDC_GN_TAB=TOSHIBA HW Setup program allows you to configure your computer.



IDC_DP_POWER=Power On Display

IDC_DP_TAB=This tab lets you select the internal LCD and/or external monitor when the computer boots up.

IDC_DP_RDO_AUTO=Auto-Selected

IDC_DP_RDO_BOTH=LCD + Analog RGB



IDC_BT_PRIORITY=Boot Priority Options

IDC_BT_NETWORK=Network Boot Protocol

IDC_BT_TAB=This tab sets the Boot Priority of the device.

IDC_BT_RDO_PXE=PXE

IDC_BT_RDO_RPL=RPL



IDC_KEYBOARD_TAB=This tab lets you set conditions for the Keyboard.

IDC_KB_WAKE=Wake-up on Keyboard

IDC_KB_RDO_ENABLED=Enabled

IDC_KB_RDO_DISABLED=Disabled



IDC_USB_USB=USB KB/Mouse/FDD Legacy Emulation

IDC_USB_TAB=This tab lets you set conditions for USB. You can select to enable or disable USB Keyboard / Mouse / FDD Legacy Emulation.

IDC_USB_RDO_ENABLED=Enabled

IDC_USB_RDO_DISABLED=Disabled



IDC_LAN_TAB=This tab lets you set conditions for LAN.

IDC_LAN_BUILT=Built-in LAN

IDC_LAN_RDO_ENABLED=Enabled

IDC_LAN_RDO_DISABLED=Disabled



IDC_PW_TAB=This tab allows you to set or reset the user password for power on.

IDC_PW_OWNER=Owner String

IDC_PW_COMMON=User Password

IDC_PW_RDO_COMMON_NO=Not Registered

IDC_PW_RDO_COMMON_YES=Registered



IDD_ABOUTBOX=Version

IDC_AB_VERSION=TOSHIBA HWSetup V1.5.8.1

IDC_AB_COPYRIGHT=Copyright 2005 TOSHIBA Corporation. All rights reserved.



IDD_DLG_PASSWD_ENTER=Password

IDC_ET_ENTER=Enter Password:

IDD_DLG_PASSWD_VERIFY=Password Verification

IDC_VR_VERIFY=Verify Password:

IDD_DLG_PASSWD_ENTER_SUPER=Supervisor Password



IDOK=OK

ID_APPLY_NOW=Apply

IDCANCEL=Cancel

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 2.63