[Version]
Signature="$CHICAGO$"
Class=HIDClass
ClassGuid={745a17a0-74d3-11d0-b6fe-00a0c90f57da}
Provider=%strSMSC%
CatalogFile=hidsmsc.cat
;LayoutFile=layout.inf
DriverVer=01/17/2006,5.3.2600.3
;
; Layout.inf (etc.) list all files shipped with the operating system so the
; source description sections are only needed if other files are needed.
;
; In order to use IHV drivers, the SourceDisksNames section must list the
; disk(s) containing the drivers and the SourceDisksFiles section must list
; which disk number each file to be copied is found on.
; Disk number 99 is used to avoid a conflict with the disk numbers defined
; in layout.inf
;
; Files used in a driver installation need to be digitally signed otherwise
; installation may fail. See documentation elsewhere in the DDK regarding
; driver signing.
;
; [SourceDisksNames]
; 99=%DiskId%,,
;
; [SourceDisksFiles]
; vhidmini.sys = 99
[DestinationDirs]
SysCopyFiles = 12 ; should it be 10 to take care of 98 stuff??????
[Manufacturer]
%strSMSC%=SMSC_CIR
[SMSC_CIR]
%*SMCB000.DeviceDesc%=*SMCB000.ndi, *SMCB000
[ControlFlags]
ExcludeFromSelect = *SMCB000
[*SMCB000.ndi]
;BusType=14 ; ISAPNP Bus
;Characteristics = 0x84 ; NCF_PHYSICAL, NCF_HAS_UI
CopyFiles=SysCopyFiles
DriverVer=01/17/2006,5.3.2600.3
;LogConfig = SMCB000.LC0, SMCB000.LC1
[*SMCB000.ndi.Services]
AddService=SMCB000,2,SMCB000.AddService,
[*SMCB000.ndi]
AddReg = SMCB000_Parameters.AddReg
[SMCB000.AddService]
DisplayName=%*SMCB000.ServiceDesc%
ServiceType=1 ; SERVICE_KERNEL_DRIVER
StartType=3 ; SERVICE_DEMAND_START
ErrorControl=1 ; SERVICE_ERROR_NORMAL
ServiceBinary=%12%\hidsmsc.sys ; where the driver is
; Note: the same bin can not be used
; in multiple services
[SysCopyFiles]
hidsmsc.sys,,,2
[SMCB000_Parameters.AddReg]
HKR,,"ReadFromRegistry",%REG_DWORD%, 0x00000001
HKR,,"MyReportDescriptor",%REG_BINARY%,\
\ ; Keyboard
0x05, 0x01, \ ; Usage Page (Generic Desktop),
0x09, 0x06, \ ; Usage (Keyboard),
0xA1, 0x01, \ ; Collection (Application),
0x85, 0x01, \ ; Report Id (1)
0x05, 0x07, \ ; usage page key codes
0x19, 0xe0, \ ; usage min left control
0x29, 0xe8, \ ; usage max keyboard right gui
0x75, 0x01, \ ; report size 1
0x95, 0x08, \ ; report count 8
0x81, 0x02, \ ; input (Variable)
0x19, 0x00, \ ; usage min 0
0x29, 0x90, \ ; usage max 91
0x26, 0xff, 0x00, \ ; logical max 0xff
0x75, 0x08, \ ; report size 8
0x95, 0x01, \ ; report count 1
0x81, 0x00, \ ; Input (Data, Array),
0xC0 \ ; End Collection
[SourceDisksNames]
1=%strDiskName%,,,
[SourceDisksFiles]
hidsmsc.sys = 1
;================================================================
[Strings]
; *******Localizable Strings*******
strSMSC = "SMSC"
*SMCB000.DeviceDesc="SMSC HID CIR - Consumer IR"
*SMCB000.ServiceDesc="SMSC CIR HID Miniport Device Driver"
strDiskName="SMSC CIR"
; *******Non Localizable Strings*******
SERVICE_BOOT_START = 0x0
SERVICE_SYSTEM_START = 0x1
SERVICE_AUTO_START = 0x2
SERVICE_DEMAND_START = 0x3
SERVICE_DISABLED = 0x4
SERVICE_KERNEL_DRIVER = 0x1
SERVICE_ERROR_IGNORE = 0x0
SERVICE_ERROR_NORMAL = 0x1
SERVICE_ERROR_SEVERE = 0x2
SERVICE_ERROR_CRITICAL = 0x3
REG_EXPAND_SZ = 0x00020000
REG_DWORD = 0x00010001
REG_MULTI_SZ = 0x00010000
REG_BINARY = 0x00000001
REG_SZ = 0x00000000
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.