NETFM.INF Driver File Contents (10304.exe)

; NETFM.INF
;
; Fujitsu FM10304/8 Ethernet Card.
;
; Copyright 1995-, Fujitsu Microelectronics Inc.

[version]
LayoutFile=layout.inf
signature="$CHICAGO$"
Class=Net
provider=%V_MS%

[Manufacturer]
%V_MBH%=MBHAme

[MBHAme]
%*FUJI.DeviceDesc%=*FUJI.ndi, PCMCIA\PCMCIA_LAN_MBH10304-0541
%*FUJI.DeviceDesc%=*FUJI.ndi, PCMCIA\PCMCIA_LAN_MBH10308-DD8E


[*FUJI.ndi]
AddReg=*FUJI.ndi.reg,mbh.ndi.reg,Clone.params.reg

[*FUJI.ndi.reg]
HKR,Ndi,DeviceID,,"PCMCIA\PCMCIA_LAN_MBH10304-0541"
HKR,Ndi,DeviceID,,"PCMCIA\PCMCIA_LAN_MBH10308-DD8E"

; Base section for Fujitsu users
[mbh.ndi.reg]
; key,subkey,valuname,type,value
HKR,,DevLoader,,*ndis
HKR,,DeviceVxDs,,fmwin95.sys
HKR,,EnumPropPages,,"netdi.dll,EnumPropPages"
; NDIS Info
HKR,NDIS,LogDriverName,,"FMWIN95"
HKR,NDIS,MajorNdisVersion,1,03
HKR,NDIS,MinorNdisVersion,1,0A
; Interfaces
HKR,Ndi\Interfaces,DefUpper,,"ndis3"
HKR,Ndi\Interfaces,DefLower,,"ethernet"
HKR,Ndi\Interfaces,UpperRange,,"ndis3"
HKR,Ndi\Interfaces,LowerRange,,"ethernet"
; Install sections
HKR,Ndi\Install,ndis3,,"mbh.ndis3"

; Install NDIS3
[mbh.ndis3]
CopyFiles=mbh.ndis3.CopyFiles
[mbh.ndis3.CopyFiles]
fmwin95.sys

; extra params for MBH Card
[Clone.params.reg]
; Resources
HKR,,InterruptNumber,1,04,00,00,00
HKR,,IOBaseAddress,1,02,00,00,00
HKR,,MemoryMappedBaseAddress,1,01,00,00,00

; OVERRIDE FOR 16K RAM WINDOW
HKR,Override,0000,1,\
;
00,04,00,00, \      ; CONFIGMG_VERSION
00,00,00,00, \      ; PRIORITY
;
; I/O Resource Descriptor
;
24,00,00,00, \      ; Total length of I/O Resource Descriptor
02,00,00,00, \      ; ResType_IO = 0x00000002
01,00, \            ; IOD_Count;
0C,00, \            ; IOD_Type;         // IOType_Range = 0x000C
00,00, \            ; IOD_Alloc_Base;
00,00, \            ; IOD_Alloc_End;
00,00, \            ; IOD_DesFlags;
00, \               ; IOD_Alloc_Alias;
00, \               ; IOD_Alloc_Decode;
E0,FF, \            ; IOR_Align;        // Mask for base alignment
10,00, \            ; IOR_nPorts;       // Number of ports
A0,00, \            ; IOR_Min;          // Min port address
E0,03, \            ; IOR_Max;          // Max port address
00,00, \            ; IOR_RangeFlags;   // Flags
00, \               ; IOR_Alias;        // Alias offset
00, \               ; IOR_Decode;       // Address specified
64,00,00,00, \      ; PCCARD flags, 0x40 = 16-bit port
;
; IRQ Resource Descriptor
;
14,00,00,00, \      ; Total length of IRQ Resource Descriptor
04,00,00,00, \      ; ResType_IRQ = 0x00000004
00,00, \            ; IRQD_Flags;
00,00, \            ; IRQD_Alloc_Num;   // Allocated IRQ number
FF,FF, \            ; IRQD_Req_Mask;    // Mask of possible IRQs
00,00, \            ; IRQD_Reserved;
20,00,00,00, \      ; PCCARD flags, 0x20 = Level mode interrupts
;
; Memory Resource Descriptor
;
34,00,00,00, \      ; Total length of Memory Resource Descriptor
01,00,00,00, \      ; ResType_Mem = 0x00000001
01,00, \            ; MD_Count;
14,00, \            ; MD_Type;          // MType_Range = 0x0014
00,00,00,00, \      ; MD_Alloc_Base;
00,00,00,00, \      ; MD_Alloc_End;
00,00, \            ; MD_Flags;
00,00, \            ; MD_Reserved;
00,F0,FF,FF, \      ; MR_Align;         // Mask for base alignment
00,10,00,00, \      ; MR_nBytes;        // Count of bytes (4K)
00,00,00,00, \      ; MR_Min;           // Min Address
FF,FF,FF,FF, \      ; MR_Max;           // Max Address
00,00, \            ; MR_Flags;         // Flags
00,00, \            ; MR_Reserved;
02,00,00,00, \      ; PCCARD flags, 0x02 = attribute mem, or
                    ;         0x08 = 16-bit common mem
00,00,00,00, \      ; Memory card address

; REQUEST_CONFIG_PKT Descriptor
;
19,00,00,00, \      ; Total length of REQUEST_CONFIG_PKT Descriptor
7C,89,00,00, \      ; (ResType_Ignored_Bit + PCCARD_DEVICE_ID) = 0x897C
00,00, \            ; Socket;
02,00, \            ; Attributes;
32, \               ; Vcc;
32, \               ; Vpp1;
32, \               ; Vpp2;
02, \               ; IntType;
f0,03,00,00, \      ; ConfigBase;
00, \               ; Status;
00, \               ; Pin;
00, \               ; Copy;
60, \               ; ConfigIndex;
03, \               ; Present;
                    ;
00,00,00,00         ; TERMINATOR




;****************************************************************************
; Destination Directories
;****************************************************************************
[DestinationDirs]
DefaultDestDir           =11    ;
mbh.ndis3.CopyFiles      =11

;****************************************************************************
; Localizable Strings
;****************************************************************************
[strings]
; Provider
V_MS="Microsoft"
; Manufacturers
V_MBH="Fujitsu FM10304/8 Ethernet Card"

; PNP MBH
*FUJI.DeviceDesc="Fujitsu FM10304/8 Ethernet Card"

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 2.02