D-Link DMF-560TXD DirectPort PC Card Award Cardware Installation Contents ÄÄÄÄÄÄÄÄ Introduction Getting Started Support Options Copyrights, Trademarks, and Disclaimers Introduction ÄÄÄÄÄÄÄÄÄÄÄÄ The Cardware utilities are supplied by Award and Ventura. When the card is inserted it will beep. Use CARDCHEK.EXE to check the card has been configured correctly (look at the "PCMCIA Hardware" option). Getting Started ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Older versions (dated before 1/7/93) ÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Run the 'PC Card Control for Windows' program under Windows. If Windows is not installed, edit the CARDWARE.INI file as indicated at the end of this section. Make sure the LanModem card is inserted into one of your PC's sockets. Run 'PC Card Control for Windows' from the Cardware sub-directory. Press 'OK' buttons on any card detect errors until you get to the main menu. Select the 'Cards' option and choose 'Edit'. Select Socket A (or wherever the PC Card is located) and press Enter. If you already have a device in the Defined box called LanModem then skip the next 7 steps. Select 'New Device' under the 'Defined' devices box. Edit the new device to be named 'LanModem'. Select IO range 1 Base(Hex) = 300, Length = 32 (16 bit). Select IO range 2 Base(Hex) = 2F8, Length = 8 (8 bit). Do not alter Mem range 1 or 2. Select IRQ level 3. And OK to make changes. Back on the 'Edit card' screen, highlight the 'LanModem' device in the defined devices box. Transfer the LanModem to the 'Associated' box with the 'Include' command. Select OK to complete editting and return to main screen. If the LanModem card is not graphically depicted, choose 'Card' and 'Reconfigure' the socket which contains the LanModem card. If the card is still not configured exit Windows and check the CARDWARE.INI file in the CARDWARE sub-directory has had the following changes made: CARDWARE.INI ÄÄÄÄÄÄÄÄÄÄÄÄ [Cards] NumberOfRecords=1 1=Intelligent LanModem, 13, 6, -1,PCMCIAs, LanModem [SpecificAssociations] NumberOfRecords=1 1=6 [LogicalDevices] NumberOfRecords=6 ;name, memBase, memSize, IOBase, IOSize, IRQ, IO2Base, IO2Size, Type, mem2Base, mem2Size, flags 6=LanModem, 0X0, 0X0, 0X300, 0X20, 0X3, 0X2F8, 0X8, 0X0, 0X0, 0X0, 0X0 ;Note that the 'NumberOfxxx' numbers may vary from those shown here. ;Ensure also that the 'resources' section in the CardWare.ini file has ;requested the system resources for the Gold Card. This should include ;the line as follows: [Resources] I/O=0X300,0X20,E,10 Then whenever you insert the LanModem Card it will automatically be configured by the Award software. If you still have problems with CARDWARE software try replacing your CARDWARE.INI file with the one supplied on the LanModem Card Drivers Disk. Support Options ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ We are consistently improving and upgrading our drivers. you are welcomed at any time to browse through our BBS, and download any drivers, utilities and help files. If you still cannot get the LanModem working properly, our technical experts are always ready to help. Please be at your computer, have your LanModem, Drivers Disk, and the following information available: * Version number of CARDEN.EXE and any drivers you are running * The extact text of any error message displayed on your screen * The type of computer * The type of network Copyrights, Trademarks, and Disclaimers ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ All references to MS, Windows, Win95, Windows 95, Windows NT, WinNT are rights reserved by Microsoft Corporation All references to Nvl., ODI, Netware, NW, IPX, IPXODI, and LSL are rights reserved by Novell Corporation Further rights reserved to their respective corporationsDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.