TouchChip Biometrics Support
Copyright (c) 2001 STMicroelectronics
All Rights Reserved.
---------------------------------------------------------------------
This Read Me file contains information regarding the drivers for
TouchChip authentication hardware.
The Drivers directory on your installation CD contains driver necessary
for your TouchChip authentication hardware. This driver may be already
present on your computer (imaging devices), or it is installed during
normal Protector Suite Setup with user interface. However, silent
install does not install this driver. If you encounter any problems,
you can install this driver manually.
______________________
INSTALLATION PROCEDURE
To install the driver after silent setup:
1. Run STMInst.exe in Program Files/Common Files/Virtual Token.
2. A prompt to attach or to disconnect and re-attach your device may be displayed,
if you are not using built-in sensor. Perform the required action.
To install the driver completely manually,
if you are using built-in sensor:
1. Open the Device Manager window using the Control panel "System".
Then perform the action "Scan for hardware changes".
2. When prompted for drivers, insert the installation CD.
Depending on your operating system you may be required to enter
the path to the \Drivers directory.
To install the driver completely manually,
if you are not using built-in sensor:
1. Plug in your fingerprint device.
2. If no "Found New Hardware" or similar dialog is displayed,
open the Device Manager window using the Control panel "System".
Then perform the action "Scan for hardware changes".
3. When prompted for drivers, insert the installation CD.
Depending on your operating system you may be required to enter
the path to the \Drivers directory.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.