1. jaz.exe Driver
2. GUEST.INF File Contents

GUEST.INF Driver File Contents (jaz.exe)

; GUEST.INF  -- This file install descriptions for Iomega adapters
; Copyright (c) 1995 Iomega Corporation

[Version]
signature="$CHICAGO$"
Class=SCSIAdapter
Provider=%Iomega%

[Manufacturer]
%Iomega%=Iomega

;****************************
;Iomega-manufacturer device list
[Iomega]
%*isaPPA3.DeviceDesc%=*isaPPA3.drv,*isaPPA3
%*isaZOOM.DeviceDesc%=*isaZOOM.drv,*isaZOOM
%PCI\VEN_9004&DEV_5078.DeviceDesc%= AIC78XX,PCI\VEN_9004&DEV_5078
%*isa1616.DeviceDesc%=*isa1616.drv,*isa1616
%*isaB703.DeviceDesc%=*isaB703.drv,*isaB703
%*isaB701.DeviceDesc%=*isaB701.drv,*isaB701
%*isaB702.DeviceDesc%=*isaB702.drv,*isaB702     ;IOMEGA Cards
;***************************************************************************
;End of manufacturer device lists

;******************************** Iomega Driver Installation Sections
;

[*isaB701.drv]          ;Iomega installation
Copyfiles=@PC2X.mpd
AddReg=IOS,Poll,PC2XReg
LogConfig=*isaB701.LogConfig

[*isaB702.drv]          ;Iomega installation
Copyfiles=@PC2X.mpd
AddReg=IOS,Poll,PC2XReg
LogConfig=*isaB702.LogConfig

[*isaB701.det]          ; Iomega installation
addreg=ForceMPCopy

[pc2xReg]
HKR,,PortDriver,,pc2x.mpd

[*isaB701.LogConfig]
ConfigPriority=HARDRECONFIG
IOConfig=4@340-373%fff0(3ff::)
IRQConfig=5
DMAConfig=1,3

[*isaB702.det]          ; Iomega installation
addreg=ForceMPCopy

[*isaB702.LogConfig]
ConfigPriority=HARDRECONFIG
IOConfig=4@340-373%fff8(3ff::)
IRQConfig=5,7
DMAConfig=1,3

[*isaB703.drv]
Copyfiles=@PC800.mpd
AddReg=IOS,PC800Reg
LogConfig=Without_IRQ, With_IRQ

[PC800Reg]
HKR,,DevLoader,,*IOS
HKR,,PortDriver,,PC800.mpd

[Without_IRQ]          ;Primary Configuration, Factory default-NO IRQ's
ConfigPriority=HARDRECONFIG
IOConfig=280-28f(3ff::),290-29f(3ff::),300-30f(3ff::),310-31f(3ff::),330-33f(3ff::),340-34f(3ff::),348-357(3ff::),350-35f(3ff::)

[With_IRQ]             ;Secondary Configuration
ConfigPriority=HARDRECONFIG
IOConfig=280-28f(3ff::),290-29f(3ff::),300-30f(3ff::),310-31f(3ff::),330-33f(3ff::),340-34f(3ff::),348-357(3ff::),350-35f(3ff::)
IRQConfig = 7,3,4,5

[*isa1616.drv]
Copyfiles=@PC1616.MPD
AddReg=IOS,NCR406Areg
LogConfig = NormalOp

[NCR406Areg]
HKR,,DevLoader,,*IOS
HKR,,PortDriver,,PC1616.MPD

[NormalOp]
; Primary Configuration
ConfigPriority = HARDRECONFIG
IOConfig=330-33F(3ff::),230-23f(3ff::)
IRQConfig = 11,10,12,15

[*isaPPA3.drv]
Copyfiles=@ppa3.mpd
AddReg=IOS,Poll,ppa3Reg

[ppa3Reg]
HKR,,DevLoader,,*IOS
HKR,,PortDriver,,ppa3.mpd

[*isaZOOM.drv]
CopyFiles=@SPARROW.MPD
AddReg=IOS,AHA152x.Reg
DelFiles=ASPIDEV
LogConfig=*ADP6360.LogConfig,6x60.lc2

[AHA152x.Reg]
HKR,,DevLoader,,*IOS
HKR,,PortDriver,,SPARROW.MPD

[ASPIDEV]
VASPID.VXD

[*ADP6360.LogConfig]
ConfigPriority=HARDRECONFIG
IOConfig=140-15F,340-35F
IRQConfig=11,12,9,10

[6x60.LC2]
ConfigPriority=HARDRECONFIG
IOConfig=140-15F,340-35F
IRQConfig=11,12,15,9,10

[AIC78XX]
CopyFiles=@AIC78XX.MPD
AddReg=IOS,AIC78XX.Reg
DelFiles=ASPIDEV
UpdateInis=DoubleBuffer

[AIC78XX.Reg]
HKR,,PortDriver,,AIC78XX.MPD




;********************************IOS common section
[IOS]
HKR,,DevLoader,,*IOS
HKR,,DontLoadIfConflict,,"Y"

[IOSMCA]
HKR,,ConfigFlags,1,00,02,00,00

[Poll]   
HKR,,Polling,,1

[ForceMPCopy]
HKR,,NoSetupUI,,1

[DoubleBuffer]
%31%\msdos.sys,Options,,"DoubleBuffer=1"

;*****************************************************************
[DestinationDirs]
ASPIDEV = 11                    ; delete from SYSTEM dir if exists
DefaultDestDir = 12             ; IOSubsys directory

[SourceDisksNames]
1="Iomega Windows 95 Tools","",0

[SourceDisksFiles]
ppa3.mpd=1
sparrow.mpd=1
AIC78XX.MPD=1
PC1616.MPD=1
PC800.MPD=1
PC2X.MPD=1

[Strings]
SCSIClassName="SCSI controllers"

Iomega="Iomega"
*isaPPA3.DeviceDesc="Iomega Parallel Port Zip Interface"
*isaZOOM.DeviceDesc="Iomega Zip Zoom SCSI Host Adapters or PC1600"
PCI\VEN_9004&DEV_5078.DeviceDesc="Iomega Jet PCI SCSI Controller"
*isa1616.DeviceDesc="Iomega PC1616 16-bit SCSI Host Adapter"
*isaB703.DeviceDesc="Iomega PC800 8-bit SCSI Host Adapter"
*isaB701.DeviceDesc="Iomega 8-bit PC2x SCSI Host Adapters except PC2F"
*isaB702.DeviceDesc="Iomega PC2F 8-bit SCSI Host Adapters"

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.