3M Touch Systems, Inc. MicroTouch(tm) MT 7.11 Software for Windows® XP Embedded Version 7.11.0, October 4, 2005 Copyright 1993-2005 3M. All rights reserved. ------------------------------------------------------ PRODUCT SUMMARY ------------------------------------------------------ MT 7 Software, a member of the MicroTouch(tm) Software Suite, provides unified driver support for MicroTouch touch technologies over a wide range of operating systems. This version, 7.11, includes support for the new MicroTouch(tm) IST touch screen technology, as well as EX II and SCx-series controllers on the Microsoft(R) Windows(R) XP Embedded (XPe) operating system. This product includes a Touch Screen Driver, Control Panel, Calibration Tool, and Touch Monitor Tool that provide enhanced touch features on your system. ------------------------------------------------------ FEATURES AND ENHANCEMENTS ------------------------------------------------------ * This is the initial release of the Windows(R) XP Embedded Touch Screen Driver. The driver communicates with the touch screen controller and converts touches to mouse events. * This is the initial release of the Control Panel. This tool allows you to calibrate your touch screen, adjust touch modes, enable the right-click tool, and perform other actions. Consult help from the development machine for details. * This is the initial release of the Calibration Tool. This tool aligns the touch screen with the video display to enhance accuracy. * This is the initial release of the Touch Monitor Tool. This program runs in the background and controls some touch functions, such as the right-click tool and the virtual mouse. * This is the initial release of the Help files. This currently will only install in the development system containing the Target Designer. ------------------------------------------------------ SYSTEM REQUIREMENTS ------------------------------------------------------ Hardware Prerequisites * An Intel(R) i386(tm)-compatible target computer capable of running Microsoft Windows XPe is required. * A development computer running Microsoft Windows 2000 or XP is required. * A MicroTouch EX II-series, SCx-series, or IST touch screen controller, either serial or USB, is required. * Depending on the touch screen, either a serial (COM) port or a USB port is required. Software Prerequisites * MT 7 requires Microsoft Windows XP Embedded on the target machine to run. * Microsoft's Target Designer and Component Database Manager that are compatible with the XPe operating system are required on the development machine. * The development machine must run either Windows 2000 or XP. ------------------------------------------------------ INSTALLATION INSTRUCTIONS ------------------------------------------------------ * Using Windows Explorer, browse to the software distribution and double-click on the Setup program to start the installation. If you downloaded the distribution, unzip the file into another directory beforehand. * Follow the instructions given by the Setup program. The installer loads the Touch Screen Driver and Utilities including On-line Help (optional) files on the development system. * The Installer puts the files in a default directory called C:\MT7_XPe\. You may select a different location if desired. ------------------------------------------------------ LOADING MT 7 INTO THE COMPONENTS DATABASE MANAGER ------------------------------------------------------ Use the Microsoft Component Database Manager (CDM) to add the MT 7 components to your XPe database. In the CDM, go to the Database tab and click on the Import button. In the resulting dialog, browse to C:\MT7_XPe and select the MT7.SLD file. Click the Import button to make the MT 7 components available to Target Designer. ------------------------------------------------------ MT 7 COMPONENT SELECTION IN TARGET DESIGNER ------------------------------------------------------ Use the Microsoft Target Designer to select the specific MT 7 components you want for your target device. Inside the Target Designer, the Component Browser contains the MT 7 components you added with the CDM. Use this Browser to select the MT 7 components for your target image. The only required component is the MT 7 Touch Screen Driver. In the Component Browser, look under "Hardware:Devices:Mice and other pointing devices". Select the 3M Touch Systems MT 7 Touch Screen Driver. Whether you are using a serial or USB controller, the MT 7 touch screen driver requires USB support. You must include the XPe USB support component in your target device. ------------------------------------------------------ MT 7 COMPONENTS ------------------------------------------------------ MT 7 has several additional components, found in the Component Browser under "Software:Application:OEM", that you may select according to the needs of your target system. The "MT 7 Control Panel" component allows the end user to calibrate their touch screen and configure and modify some touch behavior. The "MT 7 Calibration Tool" component allows the user to calibrate their touch screen. The "MT 7 Touch Monitor Tool" component supports some runtime features, such as the right-click tool. Note that you must select one or more of the following controller support components to enable the previous tools. * MT 7 Serial EX II Support * MT 7 Serial IST Support * MT 7 Serial SC Support * MT 7 Touch Pen Support * MT 7 USB EX II Support * MT 7 USB IST Support * MT 7 USB SC Support ------------------------------------------------------ MULTIPLE MONITOR SUPPORT ------------------------------------------------------ This version of the Control Panel does not support multiple monitors. However, the Touch Screen Driver and Calibration Tool can support such systems. Contact your Field Application Engineer or Technical Support representative at 3M Touch Systems, Inc., for additional information. ------------------------------------------------------ KNOWN ISSUES ------------------------------------------------------ * Uninstaller - Issue 174: The uninstall tool may issue an error about being unable to remove a desktop icon, even though there is no such icon. This also leaves a log.txt file. - Issue 444: A custom installation can produce a file InstallErr1.log. * Calibration Tool - Issue 276: The calibration tool beeps after both the second and third targets. * Control Panel Tool - Issue 430: The linearization process does not react to ALT-F4 to close the window. - Issue 500: If a touch pen controller has its defaults restored, it is not set to the proper pen/finger mode until a reboot occurs or a change is made in the control panel. * Touch Monitor Tool - Issue 220: The right-click tool responds only to touches and not to the mouse. --------------------------------- REVISION HISTORY --------------------------------- Version 7.11.0, October 4, 2005 * Initial release ________________________________________________________ MicroTouch and the MicroTouch logo are either registered trademarks or trademarks of 3M in the United States and/or other countries. Microsoft and Microsoft Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. i386 and Intel are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. ________________________________________________________Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.