snmp.txt Driver File Contents (LAN.zip)

SNMP Agent Extension -- Implementing the INTEL(R) LAN ADAPTERS MIB
==================================================================

August 17, 2004


Contents
========

- Overview
- Prerequisites
- Installation
- Functionality
- Known Issues
- License


Overview
========

This file describes the Intel SNMP package for Linux* operating systems, 
version 1.8.x. This package supports the 2.4.x kernels. 

The SNMP agent extension extends the UCD-SNMP or NET-SNMP agent for Linux 
via a "pass-through" protocol. It provides information on the Intel(R) PRO 
LAN adapters (10/100/1000/10GbE) through the adapter drivers (e100, e1000, 
ixgb). It also provides information about advanced features, including 
teaming and VLANs, through the Advanced Network Services (ANS) module.

The extension was tested on Red Hat* Enterprise Server 3 with the 
net-snmp-5.0.9 SNMP agent and on Red Hat 9.0 with the net-snmp-5.0.6 SNMP 
agent.


Prerequisites
==============

- An SNMP agent which supports the "pass-through" protocol should 
    be installed on the system.

- libstdc++-libc6.2-2.so.3 package - available in Red Hat* 7.2 and later. 
    Located in either the libstdc++ or compat-libstdc++ package provided 
    with the operating system.
  libstdc++.so.5 package is required for x86_64 architecture.



Installation
============

1.  Copy the inic-snmp-xxx.tar.gz tar file to a directory of your choice.

2.  Untar the archive:

       tar xzf inic-snmp-xxx.tar.gz

    The inic-snmp-x.x.x directory should be created.

3.  Change directories to the inic-snmp-x.x.x directory:

       cd inic-snmp-x.x.x

    The following files should be in the directory:

       INSTALL
       ia32
       ia64
       INTELLAN.txt
       LICENSE
       README
       UNINSTALL
       inic-snmp_rh21.spec
       inic-snmp_rh3.spec
       inic-snmp_rh9.spec
       ldistrib.txt
       x86_64


4.  Enter:

       ./INSTALL [-i <install_directory>][-c <snmpd_config_file>]

    The INSTALL script:
       - detects architecture (<arch>) of the current machine (ia32, x86_64,
         or ia64)
       - copies the following files to the indicated location:

         - <arch>/inic-extension - to <install_directory>
         - <arch>/inic-daemon - to <install_directory>
         - LICENSE and README - to usr/share/doc/inic-snmp-<package_version>
         - INTELLAN.txt - to <mibs_directory>
         
       - adds the following line anywhere in <snmpd_config_file>:

           pass .1.3.6.1.4.1.343.2.7.2 <install_directory>/inic_extension

    NOTES: <install_directory>  is any preferred directory. If option -i is 
           not used, <install_directory> is /usr/local/sbin.

           <snmpd_config_file> is any configuration file for the SNMP agent. 
           If option -c is not used, <snmpd_config_file> is the file 
           specified in the snmpd.conf man page. If this file does not exist,
           INSTALL script creates an empty file in the specified location.

           <mibs_directory> is the MIBS directory specified in the snmpd man
           page.

5.  In order to receive both complete information on counters and SNMP traps,
    run the inic_daemon executable before using the extended agent.

    The inic_daemon executable is used for keeping track of internal counters
    and sending traps to the SNMP clients. The daemon recognizes the 
    directives 'trapsink', 'trap2sink', 'informsink', 'trapcommunity', 
    'agentuser', 'agentaddress', and 'agentgroup' (for more information, see 
    the snmpd.conf man page). These directives are optional and should be
    added manually to <snmpd_config_file> (see previous step, <snmpd_config_file>).

    By default, the inic_daemon reads the trap directives from the 
    configuration file specified in the snmpd.conf man page (see previous 
    step, <snmpd_config_file>). In order to use an alternative configuration
    file, specify the file from the inic_daemon command line using the '-c' 
    option:

       inic_daemon -c <snmpd_config_file>

    Your SNMP agent is now ready to run.

6.  Install the clients. Copy the MIB file (INTELLAN.txt)  to every management 
    station, placing it in the relevant MIBS directory. This varies according 
    to the SNMP MIB browser/application you are using.

For more information concerning the UCD-SNMP (NET-SNMP) package, go to 
http://net-SNMP.sourceforge.net.

    To uninstall enter:
    ------------------
 
	./UNINSTALL [-i <install_directory>][-c <snmpd_config_file>]
	
    The UNINSTALL script will remove all files installed in step 4 (see above). 
    If <install_directory> is not specified, the default is the directory used 
    when running the INSTALL script.

    The UNINSTALL script will remove the line
    
	pass .1.3.6.1.4.1.343.2.7.2 <install_directory>/inic_extension
	
    from <snmpd_config_file>. If <snmpd_config_file> is not specified, the default
    is the file used when running the INSTALL script.
 
    
    To keep all features of UNINSTALL script working properly, it is not 
    recommended to relocate the files installed/edited by INSTALL script. To 
    relocate them run UNINSTALL and then INSTALL with new parameters. 
  
    NOTE: The UNINSTALL script will not remove any directives added manually 
    to <snmpd_config_file>.



Functionality
============

The SNMP extension implements the following MIB branch.
The branch is located under the Intel branch at:

	.intel.products.nic-products.intel-lan-adapters

Full OID: .1.3.6.1.4.1.343.2.7.2

+--intel-lan-adapters(2)
   |
   +--component-description(1)
   |  |
   |  +-- -R-- String    company(1)
   |  |        Textual Convention: DisplayString
   |  |        Size: 0..255
   |  +-- -R-- String    description(2)
   |  |        Textual Convention: DisplayString
   |  |        Size: 0..255
   |  +-- -R-- String    operatingSystem(3)
   |  |        Textual Convention: DisplayString
   |  |        Size: 0..255
   |  +-- -R-- String    mibVersion1-4-3(4)
   |  |        Textual Convention: DisplayString
   |  |        Size: 0..255
   |  +-- -R-- String    mibVersionSupported(5)
   |  |        Textual Convention: DisplayString
   |  |        Size: 0..255
   |  +-- -R-- String    agentExtensionVersion(6)
   |  |        Textual Convention: DisplayString
   |  |        Size: 0..255
   |  +-- -R-- EnumVal   status(7)
   |           Values: baseDriverNotLoadedAnsNotLoaded(0), 
   |                   baseDriverLoadedAnsNotLoaded(1), 
   |                   baseDriverNotLoadedAnsLoaded(2), 
   |                   baseDriverLoadedAnsLoaded(3)
   |
   +--adaptersTables(2)
   |  |
   |  +--genericAdaptersAttrTables(1)
   |  |  |
   |  |  +--genericAdaptersAttrTable(1)
   |  |  |  |
   |  |  |  +--genericAdapterAttrEntry(1)
   |  |  |     |  Index: adapterIndex
   |  |  |     |
   |  |  |     +-- -R-- Integer32 adapterIndex(1)
   |  |  |     |        Textual Convention: InterfaceIndex
   |  |  |     |        Range: 1..2147483647
   |  |  |     +-- -R-- String    adapterName(2)
   |  |  |     |        Textual Convention: DisplayString
   |  |  |     |        Size: 0..255
   |  |  |     +-- -R-- EnumVal   adapterType(3)
   |  |  |     |        Values: standAlone(0), teamMember(1), virtual(2)
   |  |  |     +-- -R-- EnumVal   adapterDriverLoadStatus(4) (***)
   |  |  |              Values: loaded(0), notLoaded(1)
   |  |  |
   |  |  +--genericAdaptersDriversAttrTable(2)
   |  |  |  |
   |  |  |  +--genericAdapterDriverAttrEntry(1)
   |  |  |     |  Index: adapterIndex
   |  |  |     |
   |  |  |     +-- -R-- String    adapterDriverName(1)
   |  |  |     |        Textual Convention: DisplayString
   |  |  |     |        Size: 0..255
   |  |  |     +-- -R-- String    adapterDriverInfo(2)
   |  |  |     |        Textual Convention: DisplayString
   |  |  |     |        Size: 0..255
   |  |  |     +-- -R-- String    adapterDriverVersion(3)
   |  |  |     |        Textual Convention: DisplayString
   |  |  |     |        Size: 0..255
   |  |  |     +-- -R-- String    adapterDriverPath(4) (***)
   |  |  |     |        Textual Convention: DisplayString
   |  |  |     |        Size: 0..255
   |  |  |     +-- -R-- String    adapterDriverDate(5) (***)
   |  |  |     |        Textual Convention: DisplayString
   |  |  |     |        Size: 0..255
   |  |  |     +-- -R-- String    adapterDriverSize(6) (***)
   |  |  |              Textual Convention: DisplayString
   |  |  |              Size: 0..255
   |  |  |
   |  |  +--genericAdaptersTrafficStatsAttrTable(3)
   |  |     |
   |  |     +--genericAdapterTrafficStatsAttrEntry(1)
   |  |        |  Index: adapterIndex
   |  |        |
   |  |        +-- -R-- Counter   adapterRxPackets(1)
   |  |        +-- -R-- Counter   adapterTxPackets(2)
   |  |        +-- -R-- Counter   adapterRxBytes(3)
   |  |        +-- -R-- Counter   adapterTxBytes(4)
   |  |        +-- -R-- Counter   adapterRxErrors(5)
   |  |        +-- -R-- Counter   adapterTxErrors(6)
   |  |        +-- -R-- Counter   adapterRxDropped(7)
   |  |        +-- -R-- Counter   adapterTxDropped(8)
   |  |        +-- -R-- Counter   adapterRxMulticast(9)
   |  |        +-- -R-- Counter   adapterCollisions(10)
   |  |
   |  +--physicalAdaptersAttrTables(2)
   |  |  |
   |  |  +--physicalAdaptersAttrTable(1)
   |  |  |  |
   |  |  |  +--physicalAdapterAttrEntry(1)
   |  |  |     |  Index: physicalAdapterIndex
   |  |  |     |
   |  |  |     +-- -R-- Integer32 physicalAdapterIndex(1)
   |  |  |     |        Textual Convention: InterfaceIndex
   |  |  |     |        Range: 1..2147483647
   |  |  |     +-- -R-- EnumVal   physicalAdapterLinkStatus(2)
   |  |  |     |        Values: not-available(-1), link-up(0), link-down(1)
   |  |  |     +-- -RW- Counter32 physicalAdapterLinkStatusChangesCounter(3)
   |  |  |     +-- -R-- Gauge     physicalAdapterSpeed(4)
   |  |  |     +-- -R-- EnumVal   physicalAdapterDplxMode(5)
   |  |  |     |        Values: not-available(0), half(1), full(2)
   |  |  |     +-- -R-- EnumVal   physicalAdapterAutoNegotiation(6) (***)
   |  |  |     |        Values: on(0), off(1)
   |  |  |     +-- -R-- INTEGER   physicalAdapterPciBus(7)
   |  |  |     +-- -R-- INTEGER   physicalAdapterPciSlot(8)
   |  |  |     +-- -R-- INTEGER   physicalAdapterIrq(9)
   |  |  |     +-- -R-- String    physicalAdapterCurrentNA(10)
   |  |  |     |        Textual Convention: PhysAddress
   |  |  |     +-- -R-- String    physicalAdapterPermanentNA(11)
   |  |  |     |        Textual Convention: PhysAddress
   |  |  |     +-- -R-- INTEGER   physicalAdapterOnlineDiagStatus(12)  
   |  |  |              Values: not-available(-1), failed(0), passed(1)
   |  |  |
   |  |  +--physicalAdaptersAttrChecksumOffloadTable(2)
   |  |     |
   |  |     +--physicalAdapterAttrChecksumOffloadEntry(1)
   |  |        |  Index: physicalAdapterIndex
   |  |        |
   |  |        +-- -R-- EnumVal   physicalAdapterTcpRxChecksumOffLoadEnable(1) (***)
   |  |        |        Values: enabled(0), disabled(1)
   |  |        +-- -R-- Counter   physicalAdapterTcpRxChecksumBad(2) (***)
   |  |        +-- -R-- EnumVal   physicalAdapterTcpTxChecksumOffLoadEnable(3) (***)
   |  |                 Values: enabled(0), disabled(1)
   |  |
   |  +--virtualAdaptersAttrTables(3)
   |  |  |
   |  |  +--virtualAdaptersAttrTable(1)
   |  |  |  |
   |  |  |  +--virtualAdapterAttrEntry(1)
   |  |  |     |  Index: virtualAdapterIndex
   |  |  |     |
   |  |  |     +-- -R-- Integer32 virtualAdapterIndex(1)
   |  |  |     |        Textual Convention: InterfaceIndex
   |  |  |     |        Range: 1..2147483647
   |  |  |     +-- -R-- INTEGER   virtualAdapterAnsId(2)
   |  |  |
   |  |  +--virtualAdaptersVlanAttrTable(2)
   |  |     |
   |  |     +--virtualAdapterVlanAttrEntry(1)
   |  |        |  Index: virtualAdapterIndex
   |  |        |
   |  |        +-- -R-- EnumVal   virtualAdapterVlanId(1)
   |  |                 Values: none(0)
   |  |
   |  +--ansAttrTables(4)
   |  |  |
   |  |  +--ansAttrTable(1)
   |  |  |  |
   |  |  |  +--ansAttrEntry(1)
   |  |  |     |  Index: ansId
   |  |  |     |
   |  |  |     +-- -R-- INTEGER   ansId(1)
   |  |  |     +-- -R-- INTEGER   ansNumberOfMembers(2)
   |  |  |     +-- -R-- INTEGER   ansNumberOfVirtualAdapters(3)
   |  |  |
   |  |  +--ansVlansAttrTable(2)
   |  |  |  |
   |  |  |  +--ansVlanAttrEntry(1)
   |  |  |     |  Index: ansId
   |  |  |     |
   |  |  |     +-- -R-- EnumVal   ansVlanTaggingType(1)
   |  |  |     |        Values: none(0), tag-802-1Q(1), tag-802-1P(2), 
   |  |  |     |                tag-802-3AC(3), tag-iSL(4)
   |  |  |     +-- -R-- EnumVal   ansVlanGvrpSupport(2)
   |  |  |              Values: enabled(0), disabled(1)
   |  |  |
   |  |  +--ansTeamsAttrTable(3)
   |  |     |
   |  |     +--ansTeamAttrEntry(1)
   |  |        |  Index: ansId
   |  |        |
   |  |        +-- -R-- String    ansTeamName(1)
   |  |        |        Textual Convention: DisplayString
   |  |        |        Size: 0..255
   |  |        +-- -R-- EnumVal   ansTeamMode(2)
   |  |        |        Values: none(0),
   |  |        |		adapter-fault-tolerance(1),
   |  |	       |		adaptive-load-balancing(2),
   |  |	       |		static-link-aggregation(3),
   |  |	       |		iEEE-802-3ad(5),
   |  |	       | 		switch-fault-tolerance(6)
   |  |        +-- -R-- EnumVal   ansTeamLinkState(3)
   |  |        |        Values: up(0), down(1)
   |  |        +-- -R-- Gauge     ansTeamSpeed(4)
   |  |        +-- -R-- EnumVal   ansTeamProbesState(5)
   |  |        |        Values: probes-enabled(0), probes-disabled(1)
   |  |        +-- -R-- EnumVal   ansTeamProbesMode(6)
   |  |        |        Values: broadcast(0), multicast(1), not-available(2)
   |  |        +-- -R-- EnumVal   ansTeamLoadBalanceRefresh(7) (***)
   |  |        |        Values: not-available(0)
   |  |        +-- -R-- EnumVal   ansTeamProbesSendTime(8)
   |  |        |        Values: not-available(0)
   |  |        +-- -R-- EnumVal   ansTeamPreferredPrimaryIndex(9) (***)
   |  |        |        Values: not-available(-1)
   |  |        +-- -R-- EnumVal   ansTeamCurrentPrimaryIndex(10)
   |  |        |        Values: not-available(-1)
   |  |        +-- -R-- EnumVal   ansTeamPreviousPrimaryIndex(11)
   |  |        |        Values: not-available(-1)
   |  |        +-- -RW- Counter32 ansTeamFailoverCounter(12)
   |  |        +-- -R-- EnumVal   ansTeamSlaCompatible(13) (***)
   |  |        |        Values: not-available(-1), yes(0), no(1)
   |  |        +-- -R-- EnumVal   ansTeamAggrSelectionMode(14)
   |  |        |        Values: not-available(-1), bandwidth(0), count(1)
   |  |        +-- -R-- EnumVal   ansTeamRlbSupport(15)
   |  |                 Values: not-available(-1), enabled(0), disable(1)
   |  | 
   |  |
   |  +--ansMembersAttrTables(5)
   |     |
   |     +--ansMembersAttrTable(1)
   |     |  |
   |     |  +--ansMemberAttrEntry(1)
   |     |     |  Index: ansMemberIndex
   |     |     |
   |     |     +-- -R-- Integer32 ansMemberIndex(1)
   |     |     |        Textual Convention: InterfaceIndex
   |     |     |        Range: 1..2147483647
   |     |     +-- -R-- INTEGER   ansMemberAnsId(2)
   |     |
   |     +--ansTeamMembersAttrTable(2)
   |        |
   |        +--ansTeamMemberAttrEntry(1)
   |           |  Index: ansMemberIndex
   |           |
   |           +-- -R-- EnumVal   ansTeamMemberState(1)
   |           |        Values: active(0), disabled(1), standby(2), 
   |           |                active-secondary(3)
   |           +-- -RW- Counter32 ansTeamMemberFailureCounter(2)
   |           +-- -R-- EnumVal   ansTeamMemberPriority(3)
   |                    Values: none(0), primary(1), secondary(2)
   |
   +--events(3)
      |
      +--physicalAdaptersEvents(1)
      |  |
      |  +--physicalAdaptersTraps(1)
      |  |  |
      |  |  +--physicalAdapterLinkUpTrap(1)
      |  |  +--physicalAdapterLinkDownTrap(2)
      |  |  +--physicalAdapterAddedTrap(3) (***)
      |  |  +--physicalAdapterRemovedTrap(4) (***)
      |  |  +--physicalAdapterOnlineDiagPassedTrap(5)
      |  |  +--physicalAdapterOnlineDiagFailedTrap(6)
      |  |
      |  +-- -RW- EnumVal   physicalAdapterLinkUpDownTrapEnable(2)
      |  |        Values: disabled(0), enabled(1)
      |  +-- -RW- EnumVal   physicalAdapterAddedRemovedTrapEnable(3) (***)
      |  |        Values: disabled(0), enabled(1)
      |  +-- -RW- EnumVal   physicalAdapterOnlineDiagPassedFailedTrapEnable(4)
      |           Values: disabled(0), enabled(1)
      |
      +--virtualAdaptersEvents(2)
      |  |
      |  +--virtualAdaptersTraps(1)
      |  |  |
      |  |  +--virtualAdapterAddedTrap(1)
      |  |  +--virtualAdapterRemovedTrap(2)
      |  |
      |  +-- -RW- EnumVal   virtualAdaptersTrapEnable(2)
      |           Values: disabled(0), enabled(1)
      |
      +--ansEvents(3)
      |  |
      |  +--ansTraps(1)
      |  |  |
      |  |  +--ansTeamFailoverTrap(1)
      |  |  +--ansAddedTrap(2)
      |  |  +--ansRemovedTrap(3)
      |  |
      |  +-- -RW- EnumVal   ansTrapEnable(2)
      |           Values: disabled(0), enabled(1)
      |
      +--teamMembersEvents(4)
         |
         +--teamMembersTraps(1)
         |  |
         |  +--teamMemberAddedTrap(1)
         |  +--teamMemberRemovedTrap(2)
         |
         +-- -RW- EnumVal   teamMemberTrapEnable(2)
                  Values: disabled(0), enabled(1)


(***) Not Implemented


Known Issues
============

NOTE: For Linux distribution-specific information, see the ldistrib.txt file
      included in the SNMP tar file.

  Possible Memory Leak scenario
  -----------------------------

  When informsink is set to a host that acknowledges the message, there is a 
  memory leak in inic_daemon.  This is due to a memory leak in net-snmp code 
  and is a third party issue.



License
=======

This software program is released under the terms of a license agreement 
between you ('Licensee') and Intel. Do not use or load this software or any 
associated materials (collectively, the 'Software') until you have carefully 
read the full terms and conditions of the LICENSE located in this software 
package. By loading or using the Software, you agree to the terms of this 
Agreement. If you do not agree with the terms of this Agreement, do not 
install or use the Software.

* Other names and brands may be claimed as the property of others.
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 1.29