AMD Geode(TM) LX Processor and AMD Geode(TM) CS5536 Companion Device Linux ACCESS.bus Controller Driver - Release Notes Version: 01.00.0401, General Release Release Date: June 2, 2005 -------------------------------------------------------------------------------- PRODUCT INFORMATION -------------------------------------------------------------------------------- This driver provides basic support for the AMD Geode(TM) CS5536 companion device ACCESS.bus controller for Linux kernel version 2.6.11. - build_num.h - configure.ac - lx_acb.c - Makefile.in - README.AccessBus.txt (this file) Features -------- The driver provides an acb_adapter driver for the CS5536 companion device ACCESS.bus controller Dependencies ------------ - Linux Kernel 2.6.11 - (recommended) Linux 2.6.11 Kernel Patch for Geode LX/GX processors Patches_Linux2.6.11_Common_02.02.0102.patch Functional Changes ------------------ None Defects Corrected ----------------- None Known Errata ------------ None -------------------------------------------------------------------------------- VALIDATION ENVIRONMENT -------------------------------------------------------------------------------- Validated on AMD Geode(TM) Norwich Development Board - Rev 2 Rework H and Rev 3 Rework E with: Processor: AMD Geode LX processor, silicon rev. C1 @ 433 MHz Chipset: AMD Geode CS5536 companion device, silicon rev. B1 PCI Bus Speed: 66 MHz Memory: 256 MB PC3200 RAM CRT: NEC MultiSync FP2141SB Flat Panel: Samsung LTM213U3-L07 1600x1200 2-channel LVDS, Keyboard/Mouse: PS/2 on Moray 1.1 BIOS: GeodeROM 1.06.06 Operating System: Gentoo 2005.0 Kernel: v2.6.11 Kernel Patch: LX Kernel Patch v02.02.0100 Graphics Driver: LX Xorg Graphics driver v03.00.0100 Audio Driver: CS5536 ALSA Audio driver v01.00.0500 AES Driver: LX AES driver v02.01.0100 ACCESS.bus Driver: LX ACB Driver v01.00.0401 Video4Linux2 Driver: LX Video4Linux2 driver v03.02.0100 Other Software: N/A -------------------------------------------------------------------------------- INSTALLATION INSTRUCTIONS -------------------------------------------------------------------------------- Note that your usage and path names may vary. It is recommmended that users first apply and build the Geode LX processor Linux 2.6.11 Kernel Patch. This requires that the /usr/src/linux is a symbolic link to the patched target kernel. The instructions assume the build is performed on the target system, and that the patched kernel is installed. to build: autoconf ./configure make -C /usr/src/linux SUBDIRS=`pwd` modules make install mknod /dev/i2c-0 c 89 0 on udev systems: mknod /etc/udev/devices/i2c-0 c 89 0 to install (on target platform) modprobe i2c-dev insmod lx_acb.o -------------------------------------------------------------------------------- RELEASE HISTORY (Previous Release) -------------------------------------------------------------------------------- Version: 01.00.0300 Release Date: May 26, 2005 Dependencies ------------ - Linux 2.6.11 from kernel.org - Geode LX processor Linux 2.6.11 Kernel Patch Patches_Linux2.6.11_LX_1.00.0201.patch Functional Changes ------------------ - First release Defects Corrected ----------------- - First release Known Errata ------------ - First release ================================================================================ Copyright --------- Copyright 2005 Advanced Micro Devices, Inc. All rights reserved. The contents of this document are provided in connection with Advanced Micro Devices, Inc. ("AMD") products. AMD makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. No license, whether express, implied, arising by estoppel or otherwise, to any intellectual property rights is granted by this publication. Except as set forth in AMD's Standard Terms and Conditions of Sale, AMD assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. AMD's products are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or in any other application in which the failure of AMD's product could create a situation where personal injury, death, or severe property or environmental damage may occur. AMD reserves the right to discontinue or make changes to its products at any time without notice. Trademarks ---------- AMD, the AMD Arrow logo, and combinations thereof, and Geode are trademarks of Advanced Micro Devices, Inc. Other product names used in this publication are for identification purposes only and may be trademarks of their respective companies. ================================================================================Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.