Realtek RTL8110S/RTL8169S Gigalan Test Program Tools Ver 0.9
History:0.9
1.Client Requirement :(program of name:CLIENT.EXE)
a).Need a external connector with RJ45's pin 1<--> pin 3 , pin 2 <--> pin 6.
pin 4<--> pin 7 , pin 5 <--> pin 8.
b).You could modify the client.cfg file of content to disable/enable
which item will be tested or not.
Test item
num1000=5000 ;1000Mbps send counter
num100=3000 ;100Mbps send counter
num10=1000 ;10Mbps send counter
;if you want test this item
;set true else false
;
1.PG8169 =true/false ;programming EEPROM data for Giga LAN
2.Boot_rom =true/false ;will be developing in future
3.speed1000 =true/false ;force 1000fullMbps
4.speed100 =true/false ;force 100fullMbps
5.speed10 =true/false ;force 10fullMbps
6.debug =true/false ;show some counters for debugging mode.
If all of test items were pass , it will show "ooo " & return 0.
If one of test item was failed , it will stop and show "xxx" & return 1.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.