VTTimer.ini Driver File Contents (chrome9_win2kxp.zip)

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
;
; Last Modify Day: 2004/10/19
;
; The Section and Entry Spec are as following
;
;
;  ** The following is for Setting Flags:
;       1. Format:
;	   [SettingFlag]                    ==> This section is used to set the needed functions.
;	       NeedDefaultMode = 1          ==> Need to set default mode if set this flag.
;              NeedDevicePriority = 1       ==> Need to switch device by priority if set this flag.
;              NeedTVPortPriority = 1       ==> Need to switch TV Port by priority if set this flag.
;              NeedHotPlug = 1  	    ==> Need to detect hot-plug. If set this flag, 
;                                               NeedDevicePriority and NeedTVPortPriority must be set, too.
;
;
;  ** The following is for the function - Need Default Mode:
;	1. To use this function, the setting flag NeedDefaultMode should be set to 1.
;
;	2. Format:
;	   [DefaultMode.DeviceName.TVType]
;	       Entry = Value
;
;	3. Section Name:
;          - "DefaultMode" is the prefix section name for this function.
;	   - DeviceName: The name of device, such as TV, CRT, etc.
;          - TVType: TV type (standard), for TV section only.
;
;	4. Entry Key: 
;	   - HResolution: Horizontal resolution.
;	   - VResolution: Vertical resolution.
;	   - Frequency  : Screen refresh rate.
;
;
;  ** The following is for the function - Need to switch device by priority:
;	1. To use this function, the setting flag NeedDevicePriority should be set to 1.
;
;       2. Format:
;	   [DevicePriority]
;	       Entry = Value
;
;	3. Section Name:
;	   - "DevicePriority" is the section name for this function.
;
;	4. Entry key:
;          - Count:  The total number of device.
;          - Device(1,2,...): Display device, the suffix number is added for the priority.
;            The key value must be one of the device name.
;
;
;  ** The following is for the function - Need to switch TV Port by priority:
;	1. To use this function, the setting flag NeedTVPortPriority should be set to 1.
;
;	2. Format:
;	   [TVPortPriority.TVType]
;	       Entry = Value
;
;       3. Section Name:
;	   - "TVPortPriority" is the prefix section name for this function.
;          - TVType: Must be one of the TV type (standard).
;
;       4. Entry key:
;          - Count:  The total number of TV Port.
;	   - Port(1,2,...): TV Port, the suffix number is added for the priority.
;	     The key value must be one of the TV Port name.
;
;
;  ** The following is for the Keyword can be used:
;	1. Device name: 
;          - CRT
;          - DVI
;          - TV
;          - LCD
;
;       2. TV Type:
;          - PAL
;          - PAL_D
;          - PAL_I
;          - NTSC
;          - NTSC_JPN
;
;       3. TV Port name:
;          - Scart
;          - S_Video
;          - Component
;	   - Composite
;	   
;
;  ** The length of every "Section Name" and "Entry" is restricted in 30 chars. Case Insensitive!
;	
;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

;
;******The following is for Setting flags******
;
[SettingFlag]
NeedDefaultMode      	= 1
NeedDevicePriority   	= 1
NeedTVPortPriority 	= 1
NeedHotPlug       	= 1


;
;******The following is for Setting default mode******
;

;For TV
[DefaultMode.TV.PAL]
HResolution = 720
VResolution = 576
Frequency   = 60

[DefaultMode.TV.NTSC]
HResolution = 720
VResolution = 480
Frequency   = 60


;For CRT1
[DefaultMode.CRT1]
SaveCurrentMode = 1
HResolution = 1024
VResolution = 768
Frequency   = 60


;For DVI1
[DefaultMode.DVI1]
SaveCurrentMode = 1
HResolution = 1024
VResolution = 768
Frequency   = 60

;For HDMI1
[DefaultMode.HDMI1]
SaveCurrentMode = 1
HResolution = 1024
VResolution = 768
Frequency   = 60


;
;******The following is for switching device by priority******
;

[DevicePriority]
Count = 15
Device1 = CRT1
Device2 = LCD
Device3 = TV
Device4 = DVI1
Device5 = CRT2
Device6 = HDTV
Device7 = DVI2
Device8 = LCD2
Device9 = HDMI1
Device10 = DVI3
Device11 = DVI4
Device12 = TV2
Device13 = HDMI2
Device14 = HDMI3
Device15 = HDMI4


;
;******The following is for switching TV Port by priority******
;

;For PAL mode
[TVPortPriority.PAL]
Count = 4
Port1 = Scart
Port2 = S_Video
Port3 = Component
Port4 = Composite


;For NTSC mode
[TVPortPriority.NTSC]
Count = 4
Port1 = S_Video
Port2 = Component
Port3 = Composite
Port4 = Scart


Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 1.12