;
; Purpose: Netcard setup information file for Windows NT 3.51 / NT 4.0
;
; Author: Tevin Chen
;
; Date: Mar, 2005
;
[Identification]
OptionType = NetAdapter
[PlatformsSupported]
PCI
[Options]
FET
;============================================================================
[FileConstants]
UtilityInf = "UTILITY.INF"
subroutineinf = "SUBROUTN.INF"
SoftwareType = "driver"
Exit_Code = 0
NetEventDLL = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll"
Manufacturer = "VIA Technologies, Inc."
; Driver Version info
; VERSION.... 3.44
ProductMajorVersion = "3"
ProductMinorVersion = "44"
ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion)
; DEVICE_ID....
; (0x1106 == 4358)
VendorID = 4358
ProductSoftwareName = "FETNDIS"
ProductSoftwareTitle = "VIA Rhine Family Fast Ethernet Adapter Driver"
NT4Driver = "fetnd4.sys"
NT351Driver = "fetnd3.sys"
ProductSoftwareImagePathNT4 = "\SystemRoot\System32\drivers\"$(NT4Driver)
ProductSoftwareImagePathNT351 = "\SystemRoot\System32\drivers\"$(NT351Driver)
NetRuleSoftwareType = "FETSys ndisDriver FETDriver"
NetRuleSoftwareUse = $(SoftwareType)
NetRuleSoftwareBindForm = """FETSys"" yes no container"
NetRuleSoftwareClass = {"FETDriver basic"}
NetRuleSoftwareSWBindable = {"FETDriver FETAdapter non exclusive 100"}
HelpFileName = "fetndh.hlp"
ProductHardwareName = "FETNDIS"
ProductHardwareFETVT3106STitle = "VIA Rhine III Management Adapter"
ProductHardwareFETVT3106JTitle = "VIA Rhine III Fast Ethernet Adapter"
ProductHardwareFETVT3065Title = "VIA Rhine II Fast Ethernet Adapter"
ProductHardwareFETVT3043Title = "VIA VT86C100A Rhine Fast Ethernet Adapter"
ProductHardwareFETDescription = "VIA Rhine Family Fast Ethernet Adapter"
NetRuleHardwareFETType = "FET FETAdapter"
NetRuleHardwareFETClass = {"FETAdapter basic"}
AdapterFETType = 5 ;; PCI board
HelpFETId = 30
; DEVICE_ID....
; VT3043 (0x30431106 == 809701638)
VT3043CFID = 809701638
; VT3065 (0x30651106 == 811929862)
VT3065CFID = 811929862
; VT3106S (0x30531106 == 810750214)
VT3106SCFID = 810750214
; VT3106J (0x31061106 == 822481158)
VT3106JCFID = 822481158
; SubID....
; VT3106S (0x01061106 == 17174790 )
;VT3106SSubID = 17174790
; VT3106J (0x01051106 == 17109254 )
;VT3106JSubID = 17109254
; VT3065 (0x01021106 == 16912646)
;VT3065SubID = 16912646
; VT3043 (0x01001106 == 16781574)
;VT3043SubID = 16781574
NetRuleHardwareBindForm = " yes yes container"
ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
;ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
VT3106SDefaultParamList = { {ReceiveBuffers,$(NoTitle),$(!REG_VT_DWORD),64},+
{TransmitBuffers,$(NoTitle),$(!REG_VT_DWORD),64},+
{ReceiveBurstIndicate,$(NoTitle),$(!REG_VT_DWORD),64},+
{ReceiveThreshold,$(NoTitle),$(!REG_VT_DWORD),0},+
{TransmitThreshold,$(NoTitle),$(!REG_VT_DWORD),0},+
{BurstLength,$(NoTitle),$(!REG_VT_DWORD),1},+
{MapRegisters,$(NoTitle),$(!REG_VT_DWORD),32},+
{EarlyReceive,$(NoTitle),$(!REG_VT_DWORD),0},+
{EarlyTransmit,$(NoTitle),$(!REG_VT_DWORD),0},+
{ValidatePacketLen,$(NoTitle),$(!REG_VT_DWORD),0},+
{NetworkAddress,$(NoTitle),$(!REG_VT_SZ),"000000000000"},+
{ConnectionType,$(NoTitle),$(!REG_VT_DWORD),0},+
{NwayForce,$(NoTitle),$(!REG_VT_DWORD),1},+
{FlowCtrl,&(NoTitle),$(!REG_VT_DWORD),1},+
{AdaptiveInt,&(NoTitle),$(!REG_VT_DWORD),1},+
{8021pqtag,$(NoTitle),$(!REG_VT_DWORD),0},+
{VLANID,$(NoTitle),$(!REG_VT_DWORD),0} }
VT3106JDefaultParamList = { {ReceiveBuffers,$(NoTitle),$(!REG_VT_DWORD),64},+
{TransmitBuffers,$(NoTitle),$(!REG_VT_DWORD),64},+
{ReceiveBurstIndicate,$(NoTitle),$(!REG_VT_DWORD),64},+
{ReceiveThreshold,$(NoTitle),$(!REG_VT_DWORD),0},+
{TransmitThreshold,$(NoTitle),$(!REG_VT_DWORD),0},+
{BurstLength,$(NoTitle),$(!REG_VT_DWORD),1},+
{MapRegisters,$(NoTitle),$(!REG_VT_DWORD),32},+
{EarlyReceive,$(NoTitle),$(!REG_VT_DWORD),0},+
{EarlyTransmit,$(NoTitle),$(!REG_VT_DWORD),0},+
{ValidatePacketLen,$(NoTitle),$(!REG_VT_DWORD),0},+
{NetworkAddress,$(NoTitle),$(!REG_VT_SZ),"000000000000"},+
{ConnectionType,$(NoTitle),$(!REG_VT_DWORD),0},+
{NwayForce,$(NoTitle),$(!REG_VT_DWORD),1},+
{FlowCtrl,&(NoTitle),$(!REG_VT_DWORD),1}, +
{AdaptiveInt,&(NoTitle),$(!REG_VT_DWORD),1} }
VT3065DefaultParamList = { {ReceiveBuffers,$(NoTitle),$(!REG_VT_DWORD),64},+
{TransmitBuffers,$(NoTitle),$(!REG_VT_DWORD),64},+
{ReceiveBurstIndicate,$(NoTitle),$(!REG_VT_DWORD),64},+
{ReceiveThreshold,$(NoTitle),$(!REG_VT_DWORD),0},+
{TransmitThreshold,$(NoTitle),$(!REG_VT_DWORD),0},+
{BurstLength,$(NoTitle),$(!REG_VT_DWORD),1},+
{MapRegisters,$(NoTitle),$(!REG_VT_DWORD),32},+
{EarlyReceive,$(NoTitle),$(!REG_VT_DWORD),0},+
{EarlyTransmit,$(NoTitle),$(!REG_VT_DWORD),0},+
{ValidatePacketLen,$(NoTitle),$(!REG_VT_DWORD),0},+
{NetworkAddress,$(NoTitle),$(!REG_VT_SZ),"000000000000"},+
{ConnectionType,$(NoTitle),$(!REG_VT_DWORD),0},+
{NwayForce,$(NoTitle),$(!REG_VT_DWORD),1},+
{HWPhyReset,$(NoTitle),$(!REG_VT_DWORD),0},+
{FlowCtrl,&(NoTitle),$(!REG_VT_DWORD),1}, +
{AdaptiveInt,&(NoTitle),$(!REG_VT_DWORD),1} }
VT3043DefaultParamList = { {ReceiveBuffers,$(NoTitle),$(!REG_VT_DWORD),64},+
{TransmitBuffers,$(NoTitle),$(!REG_VT_DWORD),8},+
{ReceiveBurstIndicate,$(NoTitle),$(!REG_VT_DWORD),64},+
{ReceiveThreshold,$(NoTitle),$(!REG_VT_DWORD),0},+
{TransmitThreshold,$(NoTitle),$(!REG_VT_DWORD),0},+
{BurstLength,$(NoTitle),$(!REG_VT_DWORD),1},+
{MapRegisters,$(NoTitle),$(!REG_VT_DWORD),8},+
{EarlyReceive,$(NoTitle),$(!REG_VT_DWORD),0},+
{EarlyTransmit,$(NoTitle),$(!REG_VT_DWORD),0},+
{ValidatePacketLen,$(NoTitle),$(!REG_VT_DWORD),0},+
{NetworkAddress,$(NoTitle),$(!REG_VT_SZ),"000000000000"},+
{ConnectionType, $(NoTitle),$(!REG_VT_DWORD),0} }
ConnectionTypeParamList = { {Type,$(NoTitle),$(!REG_VT_SZ),"enum"},+
{ParamDesc,$(NoTitle),$(!REG_VT_SZ),"Connection Type"} }
ConnectionTypeEnumList = { {0,$(NoTitle),$(!REG_VT_SZ),"Auto-Negotiation"},+
{1,$(NoTitle),$(!REG_VT_SZ),"100BaseTx Half Duplex"},+
{2,$(NoTitle),$(!REG_VT_SZ),"100BaseTx Full Duplex"},+
{3,$(NoTitle),$(!REG_VT_SZ),"10BaseT Half Duplex"},+
{4,$(NoTitle),$(!REG_VT_SZ),"10BaseT Full Duplex"} }
NetworkAddressParamList = { {Type,$(NoTitle),$(!REG_VT_SZ),"edit"},+
{ParamDesc,$(NoTitle),$(!REG_VT_SZ),"Network Address"},+
{LimitText,$(NoTitle),$(!REG_VT_DWORD),12},+
{Optional,$(NoTitle),$(!REG_VT_DWORD),0} }
TransmitBuffersParamList = { {Type,$(NoTitle),$(!REG_VT_SZ),"int"},+
{ParamDesc,$(NoTitle),$(!REG_VT_SZ),"Transmit Buffers"},+
{Max,$(NoTitle),$(!REG_VT_DWORD),128},+
{Min,$(NoTitle),$(!REG_VT_DWORD),48} }
VT3043TransmitBuffersParamList = { {Type,$(NoTitle),$(!REG_VT_SZ),"int"},+
{ParamDesc,$(NoTitle),$(!REG_VT_SZ),"Transmit Buffers"},+
{Max,$(NoTitle),$(!REG_VT_DWORD),64},+
{Min,$(NoTitle),$(!REG_VT_DWORD),4} }
ReceiveBuffersParamList = { {Type,$(NoTitle),$(!REG_VT_SZ),"int"},+
{ParamDesc,$(NoTitle),$(!REG_VT_SZ),"Receive Buffers"},+
{Max,$(NoTitle),$(!REG_VT_DWORD),128},+
{Min,$(NoTitle),$(!REG_VT_DWORD),64} }
FlowCtrlParamList = { {Type,$(NoTitle),$(!REG_VT_SZ),"enum"},+
{ParamDesc,$(NoTitle),$(!REG_VT_SZ),"Flow Control"} }
FlowCtrlEnumList = { {0,$(NoTitle),$(!REG_VT_SZ),"Hardware Default (Auto)"},+
{1,$(NoTitle),$(!REG_VT_SZ),"Disabled"},+
{2,$(NoTitle),$(!REG_VT_SZ),"Enabled"} }
AdaptiveIntParamList = { {Type,$(NoTitle),$(!REG_VT_SZ),"enum"},+
{ParamDesc,$(NoTitle),$(!REG_VT_SZ),"Adaptive Interrupt"} }
8021pqtagParamList = { {Type,$(NoTitle),$(!REG_VT_SZ),"enum"},+
{ParamDesc,$(NoTitle),$(!REG_VT_SZ),"802.1p/Q Tagging"} }
DisableEnableEnumList = { {0,$(NoTitle),$(!REG_VT_SZ),"Disabled"},+
{1,$(NoTitle),$(!REG_VT_SZ),"Enabled"} }
VLANIDParamList = { {Type,$(NoTitle),$(!REG_VT_SZ),"int"},+
{ParamDesc,$(NoTitle),$(!REG_VT_SZ),"VLAN ID"},+
{Max,$(NoTitle),$(!REG_VT_DWORD),4094},+
{Min,$(NoTitle),$(!REG_VT_DWORD),0} }
;============================================================================
[GeneralConstants]
Sub = ""
from = ""
to = ""
ExitCodeOk = 0
ExitCodeCancel = 1
ExitCodeFatal = 2
KeyNull = ""
MAXIMUM_ALLOWED = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct = ""
KeyParameters = ""
TRUE = 1
FALSE = 0
NoTitle = 0
ExitState = "Active"
OldVersionExisted = $(FALSE)
DriverPath = $(!STF_NTPATH)\drivers
NT351Version = "3.51"
NT40Version = "4.0"
;============================================================================
[date]
Now = {} ? $(!LIBHANDLE) GetSystemDate
;============================================================================
[Identify]
read-syms Identification
set Status = STATUS_SUCCESSFUL
set Identifier = $(OptionType)
set Media = #("Source Media Descriptions", 1, 1)
Return $(Status) $(Identifier) $(Media)
;============================================================================
[ReturnOptions]
set Status = STATUS_FAILED
set OptionList = {}
set OptionTextList = {}
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
ifstr(i) $($1) == ""
goto returnoptions
endif
set PlatformList = ^(PlatformsSupported, 1)
Ifcontains(i) $($1) in $(PlatformList)
goto returnoptions
else
set Status = STATUS_NOTSUPPORTED
goto finish_ReturnOptions
endif
else
set Status = STATUS_NOLANGUAGE
goto finish_ReturnOptions
endif
;----------------------------------------------------------------------------
returnoptions = +
set OptionList = ^(Options, 1)
set OptionTextList = ^(OptionsText$($0), 1)
set Status = STATUS_SUCCESSFUL
;----------------------------------------------------------------------------
finish_ReturnOptions = +
Return $(Status) $(OptionList) $(OptionTextList)
;============================================================================
[InstallOption]
set Option = $($1)
set SrcDir = $($2)
set AddCopy = $($3)
set DoCopy = $($4)
set DoConfig = $($5)
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) NOT-IN $(LanguageList)
Return STATUS_NOLANGUAGE
endif
set-subst LF = "\n"
read-syms GeneralConstants
read-syms FileConstants
set NetRuleSoftwareBindable = $($R1)
read-syms DialogConstants$(!STF_LANGUAGE)
ifstr(i) $(!NTN_Origination) == "NCPA"
set Continue = "OK"
endif
read-syms FileConstants$(!STF_LANGUAGE)
detect date
set-title $(Function$(Option)Title)
set to = Begin
set from = Begin
set CommonStatus = STATUS_SUCCESSFUL
EndWait
;----------------------------------------------------------------------------
Begin = +
; Get the version of NT from registry (for NT3.51/NT4.0)
set CurrentVersionValue = ""
OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows NT\CurrentVersion" $(!REG_KEY_READ) KeyNt
ifstr(i) $(KeyNt) != ""
GetRegValue $(KeyNt) "CurrentVersion" CurrentVersionValue
CloseRegKey $(KeyNt)
endif
set TargetVersion = *($(CurrentVersionValue),4)
set TargetOS = ""
ifstr $(TargetVersion) == $(NT351Version)
set TargetOS = "NT351"
else-ifstr $(TargetVersion) == $(NT40Version)
set TargetOS = "NT4"
else
set Error = "This driver does not support Windows NT version "*($(CurrentVersionValue),4)" !"
goto fatal
endif
Ifstr(i) $(!NTN_InstallMode) == deinstall
set StartLabel = removeadapter
Else-Ifstr(i) $(!NTN_InstallMode) == Update
set StartLabel = UpgradeSoftware
Else-Ifstr(i) $(!NTN_InstallMode) == bind
set StartLabel = bindingadapter
Else-Ifstr(i) $(!NTN_InstallMode) == configure
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
Endif
set Error = $($R0)
set from = end
set to = end
goto nonfatalinfo
Else
set StartLabel = configureadapter
Endif
Else
set StartLabel = installadapter
set OEM_ABANDON_OPTIONS = {}
set OEM_ABANDON_SOFTWARE = FALSE
set OEM_ABANDON_ON = TRUE
Endif
set from = $(fatal)
set to = $(fatal)
goto $(StartLabel)
;----------------------------------------------------------------------------
installadapter = +
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
CloseRegKey $(KeyProduct)
Ifstr(i) !(NTN_RegBase) == $(ProductKeyName)
Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle), $(ProductVersion)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
goto end
Else
Shell $(UtilityInf), CardExistedDlg
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) != "OK"
set CommonStatus = STATUS_USERCANCEL
goto end
endif
set OldVersionExisted = $(TRUE)
Endif
Endif
ifstr(i) $(DoCopy) == "YES"
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
Set SrcDir = $($R1)
endif
Goto installproduct
;----------------------------------------------------------------------------
configureadapter = +
Ifstr(i) $(KeyProduct) == $(KeyNull)
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) == $(KeyNull)
Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Goto fatalregistry
Endif
Endif
Shell $(UtilityInf) FindService, $(KeyProduct)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Endif
Ifstr(i) $($R0) != NO_ERROR
Goto fatalregistry
endif
set KeyParameters = $($R2)
CloseRegKey $($R1)
Ifstr $(KeyParameters) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
goto fatalregistry
endif
set OldVersionExisted = $(TRUE)
set ValueName = ""
set ValueData = ""
set ValueList = {}
set PropKeyNameList = {}
set PropKeyDescList = {}
set KeyEnumValueList = {}
set KeyEnumDescList = {}
set DispTypeList = {}
OpenRegKey $(KeyParameters) "" "UI" $(MAXIMUM_ALLOWED) H_UI
ifstr $(H_UI) == $(KeyNull)
set RegistryErrorIndex = UNABLE_ACCESS_CONFIGURE_SERVICE
CloseRegKey $(KeyParameters)
goto fatalregistry
endif
set UIKeyList = {}
EnumRegKey $(H_UI) UIKeyList
ForListDo $(UIKeyList)
set UIKeyName = *($($), 1)
set PropKeyNameList = >( $(PropKeyNameList), $(UIKeyName) )
OpenRegKey $(H_UI) "" $(UIKeyName) $(MAXIMUM_ALLOWED) H_UIKey
ifstr $(H_UIKey) == $(KeyNull)
set RegistryErrorIndex = UNABLE_ACCESS_CONFIGURE_SERVICE
CloseRegKey $(H_UI)
goto fatalregistry
endif
EnumRegValue $(H_UIKey) ValueList
ForListDo $(ValueList)
set ValueName = *($($), 1)
set ValueData = *($($), 4)
ifstr(i) $(ValueName) == "Type"
set DisplayType = $(ValueData)
set DispTypeList = >( $(DispTypeList), $(DisplayType) )
endif
ifstr(i) $(ValueName) == "ParamDesc"
set DisplayDesc = $(ValueData)
set PropKeyDescList = >( $(PropKeyDescList), $(DisplayDesc) )
endif
ifstr(i) $(ValueName) == "Max"
set MaxLimit = $(ValueData)
endif
ifstr(i) $(ValueName) == "Min"
set MinLimit = $(ValueData)
endif
EndForListDo
ifstr(i) $(DisplayType) == "int"
set EnumValueStr = $(MinLimit)","$(MaxLimit)
set KeyEnumValueList = >( $(KeyEnumValueList), $(EnumValueStr) )
set KeyEnumDescList = >( $(KeyEnumDescList), "" )
else-ifstr(i) $(DisplayType) == "edit"
set KeyEnumValueList = >( $(KeyEnumValueList), "" )
set KeyEnumDescList = >( $(KeyEnumDescList), "" )
else-ifstr(i) $(DisplayType) == "enum"
OpenRegKey $(H_UIKey) "" "enum" $(!REG_KEY_READ) H_Enum
ifstr $(H_Enum) == $(KeyNull)
set RegistryErrorIndex = UNABLE_ACCESS_CONFIGURE_SERVICE
CloseRegKey $(H_UIKey)
goto fatalregistry
endif
EnumRegValue $(H_Enum) EnumList
set EnumValueStr = ""
set EnumDescStr = ""
set flag = $(FALSE)
ForListDo $(EnumList)
set EnumValue = *($($), 1)
set EnumDesc = *($($), 4)
ifint $(flag) == $(TRUE)
set EnumValueStr = $(EnumValueStr)","$(EnumValue)
set EnumDescStr = $(EnumDescStr)","$(EnumDesc)
else
set EnumValueStr = $(EnumValue)
set EnumDescStr = $(EnumDesc)
set flag = $(TRUE)
endif
EndForListDo
set KeyEnumValueList = >( $(KeyEnumValueList), $(EnumValueStr) )
set KeyEnumDescList = >( $(KeyEnumDescList), $(EnumDescStr) )
else
; Add Error Handling Code Here
endif
EndForListDo
EnumRegValue $(KeyParameters) ValueList
set CurrKeyValueList = {}
ForListDo $(PropKeyNameList)
set KeyName = $($)
ForListDo $(ValueList)
set ValueName = *($($), 1)
set ValueData = *($($), 4)
ifstr $(ValueName) == $(KeyName)
set CurrKeyValueList = >($(CurrKeyValueList), $(ValueData))
endif
EndForListDo
EndForListDo
;shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) STATUS $(CurrKeyValueList)
LoadLibrary "" $(!STF_WINDOWSSYSPATH)"\ntutil.dll" PropHandle
LibraryProcedure SetResult, $(PropHandle), ShowProp, $(PropKeyDescList), +
$(CurrKeyValueList), +
$(KeyEnumValueList), +
$(KeyEnumDescList), +
$(DispTypeList), +
$(HelpFileName)
FreeLibrary $(PropHandle)
ifstr $(SetResult) == "PROPERTY_UI_USER_CANCEL"
set CommonStatus = STATUS_USERCANCEL
goto end
endif
ifstr $(SetResult) == $(CurrKeyValueList)
set CommonStatus = STATUS_USERCANCEL
goto end
endif
ifstr(i) $(!NTN_InstallMode) == configure
goto updateparameters
endif
;----------------------------------------------------------------------------
installproduct =+
StartWait
; DEVICE_ID....
; 65535
; search device ID for 3043/3065/3106J/3106S
set AdapterList65 = {}
set AdapterList43 = {}
set AdapterList106J = {}
set AdapterList106S = {}
set NoAdapter = $(TRUE)
; find 3043 adapters
set-div DeviceID = $(VT3043CFID) 65535
Shell $(UtilityInf), GetPCIInformation, $(VendorID) $(DeviceID)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R0) != {}
set AdapterList43 = $($R0)
set NoAdapter = $(FALSE)
endif
; find 3065 adapters
set-div DeviceID = $(VT3065CFID) 65535
Shell $(UtilityInf), GetPCIInformation, $(VendorID) $(DeviceID)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R0) != {}
set AdapterList65 = $($R0)
set NoAdapter = $(FALSE)
endif
; find 3106J adapters
set-div DeviceID = $(VT3106JCFID) 65535
Shell $(UtilityInf), GetPCIInformation, $(VendorID) $(DeviceID)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R0) != {}
set AdapterList106J = $($R0)
set NoAdapter = $(FALSE)
endif
; find 3106S adapters
set-div DeviceID = $(VT3106SCFID) 65535
Shell $(UtilityInf), GetPCIInformation, $(VendorID) $(DeviceID)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R0) != {}
set AdapterList106S = $($R0)
set NoAdapter = $(FALSE)
endif
; no adapters was found
ifint $(NoAdapter) == $(TRUE)
set Error = $(CANNOT_FIND_ANY_CARD)
set CommonStatus = USER_CANCEL
set from = end
goto nonfatal
endif
Ifstr(i) $(DoCopy) == "YES"
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto successful
Endif
Set SrcDir = $($R1)
Endif
install "Install-Option"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
endif
; Chinghua - setting default values if user re-install the driver
ifint $(OldVersionExisted) == $(TRUE)
; Update InfName and InfOption
;OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Ncpa" $(MAXIMUM_ALLOWED) H_Ncpa
;ifstr $(H_Ncpa) == $(KeyNull)
; Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
; Goto fatalregistry
;endif
;GetRegValue $(H_Ncpa),"InfReturn", InfReturnList
;set InfReturnValue = *( $(InfReturnList), 4 )
;Split-String $(InfReturnValue) "," DestinationList
;set InfFileName = *( $(DestinationList), 1 )
;CloseRegKey $(H_Ncpa)
Shell $(UtilityInf), ReduceInfPath, $(STF_CONTEXTINFNAME)
set InfFileName = $($R0)
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName)"\NetRules" $(MAXIMUM_ALLOWED) H_NetRules
ifstr $(H_NetRules) == $(KeyNull)
Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Goto fatalregistry
endif
SetRegValue $(H_NetRules) {InfName,$(NoTitle),$(!REG_VT_SZ),$(InfFileName)}
SetRegValue $(H_NetRules) {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}
CloseRegKey $(H_NetRules)
; setting default value for 3106S ****************************
ForListDo $(AdapterList106S)
set BusNum = *( $($), 1 )
set DeviceNum = *( $($), 2 )
set Sub = "VT3106S"
set Description = $(ProductHardware$(Option)Description)
set Product = $(ProductHardwareName)
OpenRegKey $(!REG_H_LOCAL) +
"" +
"SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkCards" +
$(!REG_KEY_READ) +
IE_KeyNetcards
EnumRegKey $(IE_KeyNetcards) IE_KeyNameList
ForListDo $(IE_KeyNameList)
set IE_KeyName = *( $($), 1 )
OpenRegKey $(IE_KeyNetcards) "" $(IE_KeyName) $(!REG_KEY_READ) IE_Card
ifstr $(IE_Card) == $(KeyNull)
Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Goto fatalregistry
endif
GetRegValue $(IE_Card),"ProductName", ProductNameInfo
set CardProductName = *( $(ProductNameInfo), 4 )
ifstr(i) $(CardProductName) == $(Product)
GetRegValue $(IE_Card), "ServiceName", ServiceNameInfo
set ServiceName = *( $(ServiceNameInfo), 4 )
OpenRegKey $(!REG_H_LOCAL) +
"" +
$(!NTN_ServiceBase)"\"$(ServiceName)"\Parameters" +
$(!REG_KEY_READWRITE) +
IE_KeyService
ifstr $(IE_KeyService) == $(KeyNull)
Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Goto fatalregistry
endif
GetRegValue $(IE_KeyService), "BusNumber", BusInfo
GetRegValue $(IE_KeyService), "SlotNumber", SlotInfo
set CardBusNum = *( $(BusInfo), 4 )
set CardSlotNum = *( $(SlotInfo), 4 )
ifint $(CardBusNum) == $(BusNum)
ifint $(CardSlotNum) == $(DeviceNum)
; Update InfName and InfOption
OpenRegKey $(IE_Card) "" "NetRules" $(MAXIMUM_ALLOWED) H_NetRules
ifstr $(H_NetRules) == $(KeyNull)
Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Goto fatalregistry
endif
SetRegValue $(H_NetRules) {InfName,$(NoTitle),$(!REG_VT_SZ),$(InfFileName)}
SetRegValue $(H_NetRules) {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}
CloseRegKey $(H_NetRules)
; Set default value
set NewValueList = $($(Sub)DefaultParamList)
set ParamPath = $(!NTN_ServiceBase)"\"$(ServiceName)"\Parameters"
OpenRegKey $(!REG_H_LOCAL) "" $(ParamPath) $(!REG_KEY_WRITE) KeyParam
Shell $(UtilityInf), AddValueList, $(KeyParam), $(NewValueList)
; for 3106S UI registry >>>>>>>>>>>>>>>>>>>>>>>>>>>>
CreateRegKey $(KeyParam) {"UI",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" H_UI
ifstr $(H_UI) == $(KeyNull)
OpenRegKey $(KeyParam) "" "UI" $(MAXIMUM_ALLOWED) H_UI
ifstr $(H_UI) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(KeyParam)
goto fatalregistry
endif
endif
; for 3106S ConnectionType registry >>>>>>>>>>>>>>>>
CreateRegKey $(H_UI) {"ConnectionType",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" H_ConnectionType
ifstr $(H_ConnectionType) == $(KeyNull)
OpenRegKey $(H_UI) "" "ConnectionType" $(MAXIMUM_ALLOWED) H_ConnectionType
ifstr $(H_ConnectionType) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(H_UI)
goto fatalregistry
endif
endif
set NewValueList = $(ConnectionTypeParamList)
Shell $(UtilityInf), AddValueList, $(H_ConnectionType), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
; for 3106S ConnectionType Enum registry
CreateRegKey $(H_ConnectionType) {"enum",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" H_Enum
ifstr $(H_Enum) == $(KeyNull)
OpenRegKey $(H_ConnectionType) "" "enum" $(MAXIMUM_ALLOWED) H_Enum
ifstr $(H_Enum) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(H_ConnectionType)
goto fatalregistry
endif
endif
set NewValueList = $(ConnectionTypeEnumList)
Shell $(UtilityInf), AddValueList, $(H_Enum), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(H_Enum)
CloseRegKey $(H_ConnectionType)
; for 3106S NetworkAddress registry >>>>>>>>>>>>>>>>
CreateRegKey $(H_UI) {"NetworkAddress",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" H_NetworkAddress
ifstr $(H_NetworkAddress) == $(KeyNull)
OpenRegKey $(H_UI) "" "NetworkAddress" $(MAXIMUM_ALLOWED) H_NetworkAddress
ifstr $(H_NetworkAddress) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(H_UI)
goto fatalregistry
endif
endif
set NewValueList = $(NetworkAddressParamList)
Shell $(UtilityInf), AddValueList, $(H_NetworkAddress), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(H_NetworkAddress)
; for 3106S TransmitBuffers registry >>>>>>>>>>>>>>>
CreateRegKey $(H_UI) {"TransmitBuffers",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" H_TransmitBuffers
ifstr $(H_TransmitBuffers) == $(KeyNull)
OpenRegKey $(H_UI) "" "TransmitBuffers" $(MAXIMUM_ALLOWED) H_TransmitBuffers
ifstr $(H_TransmitBuffers) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(H_UI)
goto fatalregistry
endif
endif
set NewValueList = $(TransmitBuffersParamList)
Shell $(UtilityInf), AddValueList, $(H_TransmitBuffers), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(H_TransmitBuffers)
; for 3106S ReceiveBuffers registry >>>>>>>>>>>>>>>>
CreateRegKey $(H_UI) {"ReceiveBuffers",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" H_ReceiveBuffers
ifstr $(H_ReceiveBuffers) == $(KeyNull)
OpenRegKey $(H_UI) "" "ReceiveBuffers" $(MAXIMUM_ALLOWED) H_ReceiveBuffers
ifstr $(H_ReceiveBuffers) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(H_UI)
goto fatalregistry
endif
endif
set NewValueList = $(ReceiveBuffersParamList)
Shell $(UtilityInf), AddValueList, $(H_ReceiveBuffers), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(H_ReceiveBuffers)
; for 3106S FlowCtrl registry >>>>>>>>>>>>>>>>>>>>>>
CreateRegKey $(H_UI) {"FlowCtrl",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" H_FlowCtrl
ifstr $(H_FlowCtrl) == $(KeyNull)
OpenRegKey $(H_UI) "" "FlowCtrl" $(MAXIMUM_ALLOWED) H_FlowCtrl
ifstr $(H_FlowCtrl) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(H_UI)
goto fatalregistry
endif
endif
set NewValueList = $(FlowCtrlParamList)
Shell $(UtilityInf), AddValueList, $(H_FlowCtrl), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
; for 3106S FlowCtrl Enum registry
CreateRegKey $(H_FlowCtrl) {"enum",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" H_Enum
ifstr $(H_Enum) == $(KeyNull)
OpenRegKey $(H_FlowCtrl) "" "enum" $(MAXIMUM_ALLOWED) H_Enum
ifstr $(H_Enum) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(H_FlowCtrl)
goto fatalregistry
endif
endif
set NewValueList = $(FlowCtrlEnumList)
Shell $(UtilityInf), AddValueList, $(H_Enum), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(H_Enum)
CloseRegKey $(H_FlowCtrl)
; for 3106S AdaptiveInt registry >>>>>>>>>>>>>>>>>>>>>>
CreateRegKey $(H_UI) {"AdaptiveInt",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" H_AdaptiveInt
ifstr $(H_AdaptiveInt) == $(KeyNull)
OpenRegKey $(H_UI) "" "AdaptiveInt" $(MAXIMUM_ALLOWED) H_AdaptiveInt
ifstr $(H_AdaptiveInt) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(H_UI)
goto fatalregistry
endif
endif
set NewValueList = $(AdaptiveIntParamList)
Shell $(UtilityInf), AddValueList, $(H_AdaptiveInt), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
; for 3106S AdaptiveInt Enum registry
CreateRegKey $(H_AdaptiveInt) {"enum",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" H_Enum
ifstr $(H_Enum) == $(KeyNull)
OpenRegKey $(H_AdaptiveInt) "" "enum" $(MAXIMUM_ALLOWED) H_Enum
ifstr $(H_Enum) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(H_AdaptiveInt)
goto fatalregistry
endif
endif
set NewValueList = $(DisableEnableEnumList)
Shell $(UtilityInf), AddValueList, $(H_Enum), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(H_Enum)
CloseRegKey $(H_AdaptiveInt)
; for 3106S 8021pqtag registry >>>>>>>>>>>>>>>>>>>>>
CreateRegKey $(H_UI) {"8021pqtag",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" H_8021pqtag
ifstr $(H_8021pqtag) == $(KeyNull)
OpenRegKey $(H_UI) "" "8021pqtag" $(MAXIMUM_ALLOWED) H_8021pqtag
ifstr $(H_8021pqtag) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(H_UI)
goto fatalregistry
endif
endif
set NewValueList = $(8021pqtagParamList)
Shell $(UtilityInf), AddValueList, $(H_8021pqtag), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
; for 3106S 8021pqtag Enum registry
CreateRegKey $(H_8021pqtag) {"enum",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" H_Enum
ifstr $(H_Enum) == $(KeyNull)
OpenRegKey $(H_8021pqtag) "" "enum" $(MAXIMUM_ALLOWED) H_Enum
ifstr $(H_Enum) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(H_8021pqtag)
goto fatalregistry
endif
endif
set NewValueList = $(DisableEnableEnumList)
Shell $(UtilityInf), AddValueList, $(H_Enum), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(H_Enum)
CloseRegKey $(H_8021pqtag)
; for 3106S VLANID registry >>>>>>>>>>>>>>>>>>>>>>>>
CreateRegKey $(H_UI) {"VLANID",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" H_VLANID
ifstr $(H_VLANID) == $(KeyNull)
OpenRegKey $(H_UI) "" "VLANID" $(MAXIMUM_ALLOWED) H_VLANID
ifstr $(H_VLANID) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(H_UI)
goto fatalregistry
endif
endif
set NewValueList = $(VLANIDParamList)
Shell $(UtilityInf), AddValueList, $(H_VLANID), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(H_VLANID)
CloseRegKey $(H_UI)
CloseRegKey $(KeyParam)
; Update Software Title
set ParamPath = "SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$(IE_KeyName)
OpenRegKey $(!REG_H_LOCAL) "" $(ParamPath) $(!REG_KEY_WRITE) KeyParam
SetRegValue $(KeyParam) {Title,$(NoTitle),$(!REG_VT_SZ),"["$(IE_KeyName)"] "$(ProductHardware$(Option)$(Sub)Title)}
CloseRegKey $(KeyParam)
; Update Version Number
set ParamPath = "SOFTWARE\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
OpenRegKey $(!REG_H_LOCAL) "" $(ParamPath) $(!REG_KEY_WRITE) KeyParam
SetRegValue $(KeyParam) {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)}
SetRegValue $(KeyParam) {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)}
CloseRegKey $(KeyParam)
endif
endif
CloseRegKey $(IE_KeyService)
endif
CloseRegKey $(IE_Card)
EndForListDo
CloseRegKey $(IE_KeyNetcards)
EndForListDo
; setting default value for 3106J ****************************
ForListDo $(AdapterList106J)
set BusNum = *( $($), 1 )
set DeviceNum = *( $($), 2 )
set Sub = "VT3106J"
set Description = $(ProductHardware$(Option)Description)
set Product = $(ProductHardwareName)
OpenRegKey $(!REG_H_LOCAL) +
"" +
"SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkCards" +
$(!REG_KEY_READ) +
IE_KeyNetcards
EnumRegKey $(IE_KeyNetcards) IE_KeyNameList
ForListDo $(IE_KeyNameList)
set IE_KeyName = *( $($), 1 )
OpenRegKey $(IE_KeyNetcards) "" $(IE_KeyName) $(!REG_KEY_READ) IE_Card
ifstr $(IE_Card) == $(KeyNull)
Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Goto fatalregistry
endif
GetRegValue $(IE_Card),"ProductName", ProductNameInfo
set CardProductName = *($(ProductNameInfo), 4)
ifstr(i) $(CardProductName) == $(Product)
GetRegValue $(IE_Card), "ServiceName", ServiceNameInfo
set ServiceName = *($(ServiceNameInfo), 4)
OpenRegKey $(!REG_H_LOCAL) +
"" +
$(!NTN_ServiceBase)"\"$(ServiceName)"\Parameters" +
$(!REG_KEY_READWRITE) +
IE_KeyService
ifstr $(IE_KeyService) == $(KeyNull)
Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Goto fatalregistry
endif
GetRegValue $(IE_KeyService), "BusNumber", BusInfo
GetRegValue $(IE_KeyService), "SlotNumber", SlotInfo
set CardBusNum = *( $(BusInfo), 4 )
set CardSlotNum = *( $(SlotInfo), 4 )
ifint $(CardBusNum) == $(BusNum)
ifint $(CardSlotNum) == $(DeviceNum)
; Update InfName and InfOption
OpenRegKey $(IE_Card) "" "NetRules" $(MAXIMUM_ALLOWED) H_NetRules
ifstr $(H_NetRules) == $(KeyNull)
Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Goto fatalregistry
endif
SetRegValue $(H_NetRules) {InfName,$(NoTitle),$(!REG_VT_SZ),$(InfFileName)}
SetRegValue $(H_NetRules) {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}
CloseRegKey $(H_NetRules)
; Set default value
set NewValueList = $($(Sub)DefaultParamList)
set ParamPath = $(!NTN_ServiceBase)"\"$(ServiceName)"\Parameters"
OpenRegKey $(!REG_H_LOCAL) "" $(ParamPath) $(!REG_KEY_WRITE) KeyParam
Shell $(UtilityInf), AddValueList, $(KeyParam), $(NewValueList)
; for 3106J UI registry >>>>>>>>>>>>>>>>>>>>>>>>>>>>
CreateRegKey $(KeyParam) {"UI",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" H_UI
ifstr $(H_UI) == $(KeyNull)
OpenRegKey $(KeyParam) "" "UI" $(MAXIMUM_ALLOWED) H_UI
ifstr $(H_UI) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(KeyParam)
goto fatalregistry
endif
endif
; for 3106J ConnectionType registry >>>>>>>>>>>>>>>>
CreateRegKey $(H_UI) {"ConnectionType",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" H_ConnectionType
ifstr $(H_ConnectionType) == $(KeyNull)
OpenRegKey $(H_UI) "" "ConnectionType" $(MAXIMUM_ALLOWED) H_ConnectionType
ifstr $(H_ConnectionType) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(H_UI)
goto fatalregistry
endif
endif
set NewValueList = $(ConnectionTypeParamList)
Shell $(UtilityInf), AddValueList, $(H_ConnectionType), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
; for 3106J ConnectionType Enum registry
CreateRegKey $(H_ConnectionType) {"enum",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" H_Enum
ifstr $(H_Enum) == $(KeyNull)
OpenRegKey $(H_ConnectionType) "" "enum" $(MAXIMUM_ALLOWED) H_Enum
ifstr $(H_Enum) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(H_ConnectionType)
goto fatalregistry
endif
endif
set NewValueList = $(ConnectionTypeEnumList)
Shell $(UtilityInf), AddValueList, $(H_Enum), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(H_Enum)
CloseRegKey $(H_ConnectionType)
; for 3106J NetworkAddress registry >>>>>>>>>>>>>>>>
CreateRegKey $(H_UI) {"NetworkAddress",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" H_NetworkAddress
ifstr $(H_NetworkAddress) == $(KeyNull)
OpenRegKey $(H_UI) "" "NetworkAddress" $(MAXIMUM_ALLOWED) H_NetworkAddress
ifstr $(H_NetworkAddress) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(H_UI)
goto fatalregistry
endif
endif
set NewValueList = $(NetworkAddressParamList)
Shell $(UtilityInf), AddValueList, $(H_NetworkAddress), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(H_NetworkAddress)
; for 3106J TransmitBuffers registry >>>>>>>>>>>>>>>
CreateRegKey $(H_UI) {"TransmitBuffers",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" H_TransmitBuffers
ifstr $(H_TransmitBuffers) == $(KeyNull)
OpenRegKey $(H_UI) "" "TransmitBuffers" $(MAXIMUM_ALLOWED) H_TransmitBuffers
ifstr $(H_TransmitBuffers) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(H_UI)
goto fatalregistry
endif
endif
set NewValueList = $(TransmitBuffersParamList)
Shell $(UtilityInf), AddValueList, $(H_TransmitBuffers), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(H_TransmitBuffers)
; for 3106J ReceiveBuffers registry >>>>>>>>>>>>>>>>
CreateRegKey $(H_UI) {"ReceiveBuffers",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" H_ReceiveBuffers
ifstr $(H_ReceiveBuffers) == $(KeyNull)
OpenRegKey $(H_UI) "" "ReceiveBuffers" $(MAXIMUM_ALLOWED) H_ReceiveBuffers
ifstr $(H_ReceiveBuffers) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(H_UI)
goto fatalregistry
endif
endif
set NewValueList = $(ReceiveBuffersParamList)
Shell $(UtilityInf), AddValueList, $(H_ReceiveBuffers), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(H_ReceiveBuffers)
; for 3106J FlowCtrl registry >>>>>>>>>>>>>>>>>>>>>>
CreateRegKey $(H_UI) {"FlowCtrl",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" H_FlowCtrl
ifstr $(H_FlowCtrl) == $(KeyNull)
OpenRegKey $(H_UI) "" "FlowCtrl" $(MAXIMUM_ALLOWED) H_FlowCtrl
ifstr $(H_FlowCtrl) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(H_UI)
goto fatalregistry
endif
endif
set NewValueList = $(FlowCtrlParamList)
Shell $(UtilityInf), AddValueList, $(H_FlowCtrl), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
; for 3106J FlowCtrl Enum registry
CreateRegKey $(H_FlowCtrl) {"enum",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" H_Enum
ifstr $(H_Enum) == $(KeyNull)
OpenRegKey $(H_FlowCtrl) "" "enum" $(MAXIMUM_ALLOWED) H_Enum
ifstr $(H_Enum) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(H_FlowCtrl)
goto fatalregistry
endif
endif
set NewValueList = $(FlowCtrlEnumList)
Shell $(UtilityInf), AddValueList, $(H_Enum), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(H_Enum)
CloseRegKey $(H_FlowCtrl)
; for 3106J AdaptiveInt registry >>>>>>>>>>>>>>>>>>>>>>
CreateRegKey $(H_UI) {"AdaptiveInt",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" H_AdaptiveInt
ifstr $(H_AdaptiveInt) == $(KeyNull)
OpenRegKey $(H_UI) "" "AdaptiveInt" $(MAXIMUM_ALLOWED) H_AdaptiveInt
ifstr $(H_AdaptiveInt) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(H_UI)
goto fatalregistry
endif
endif
set NewValueList = $(AdaptiveIntParamList)
Shell $(UtilityInf), AddValueList, $(H_AdaptiveInt), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
; for 3106J AdaptiveInt Enum registry
CreateRegKey $(H_AdaptiveInt) {"enum",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" H_Enum
ifstr $(H_Enum) == $(KeyNull)
OpenRegKey $(H_AdaptiveInt) "" "enum" $(MAXIMUM_ALLOWED) H_Enum
ifstr $(H_Enum) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(H_AdaptiveInt)
goto fatalregistry
endif
endif
set NewValueList = $(DisableEnableEnumList)
Shell $(UtilityInf), AddValueList, $(H_Enum), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(H_Enum)
CloseRegKey $(H_AdaptiveInt)
CloseRegKey $(KeyParam)
; Update Software Title
set ParamPath = "SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$(IE_KeyName)
OpenRegKey $(!REG_H_LOCAL) "" $(ParamPath) $(!REG_KEY_WRITE) KeyParam
SetRegValue $(KeyParam) {Title,$(NoTitle),$(!REG_VT_SZ),"["$(IE_KeyName)"] "$(ProductHardware$(Option)$(Sub)Title)}
CloseRegKey $(KeyParam)
; Update Version Number
set ParamPath = "SOFTWARE\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
OpenRegKey $(!REG_H_LOCAL) "" $(ParamPath) $(!REG_KEY_WRITE) KeyParam
SetRegValue $(KeyParam) {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)}
SetRegValue $(KeyParam) {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)}
CloseRegKey $(KeyParam)
endif
endif
CloseRegKey $(IE_KeyService)
endif
CloseRegKey $(IE_Card)
EndForListDo
CloseRegKey $(IE_KeyNetcards)
EndForListDo
; setting default value for 3065 *****************************
ForListDo $(AdapterList65)
set BusNum = *( $($), 1 )
set DeviceNum = *( $($), 2 )
set Sub = "VT3065"
set Description = $(ProductHardware$(Option)Description)
set Product = $(ProductHardwareName)
OpenRegKey $(!REG_H_LOCAL) +
"" +
"SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkCards" +
$(!REG_KEY_READ) +
IE_KeyNetcards
EnumRegKey $(IE_KeyNetcards) IE_KeyNameList
ForListDo $(IE_KeyNameList)
set IE_KeyName = *( $($), 1 )
OpenRegKey $(IE_KeyNetcards) "" $(IE_KeyName) $(MAXIMUM_ALLOWED) IE_Card
ifstr $(IE_Card) == $(KeyNull)
Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Goto fatalregistry
endif
GetRegValue $(IE_Card), "ProductName", ProductNameInfo
set CardProductName = *( $(ProductNameInfo), 4 )
ifstr(i) $(CardProductName) == $(Product)
GetRegValue $(IE_Card), "ServiceName", ServiceNameInfo
set ServiceName = *( $(ServiceNameInfo), 4 )
OpenRegKey $(!REG_H_LOCAL) +
"" +
$(!NTN_ServiceBase)"\"$(ServiceName)"\Parameters" +
$(!REG_KEY_READWRITE) +
IE_KeyService
ifstr $(IE_KeyService) == $(KeyNull)
Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Goto fatalregistry
endif
GetRegValue $(IE_KeyService), "BusNumber", BusInfo
GetRegValue $(IE_KeyService), "SlotNumber", SlotInfo
set CardBusNum = *( $(BusInfo), 4 )
set CardSlotNum = *( $(SlotInfo), 4 )
ifint $(CardBusNum) == $(BusNum)
ifint $(CardSlotNum) == $(DeviceNum)
; Update InfName and InfOption
OpenRegKey $(IE_Card) "" "NetRules" $(MAXIMUM_ALLOWED) H_NetRules
ifstr $(H_NetRules) == $(KeyNull)
Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Goto fatalregistry
endif
SetRegValue $(H_NetRules) {InfName,$(NoTitle),$(!REG_VT_SZ),$(InfFileName)}
SetRegValue $(H_NetRules) {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}
CloseRegKey $(H_NetRules)
; Set default value
set NewValueList = $($(Sub)DefaultParamList)
set ParamPath = $(!NTN_ServiceBase)"\"$(ServiceName)"\Parameters"
OpenRegKey $(!REG_H_LOCAL) "" $(ParamPath) $(!REG_KEY_WRITE) KeyParam
Shell $(UtilityInf), AddValueList, $(KeyParam), $(NewValueList)
; for 3065 UI registry >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
CreateRegKey $(KeyParam) {"UI",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" H_UI
ifstr $(H_UI) == $(KeyNull)
OpenRegKey $(KeyParam) "" "UI" $(MAXIMUM_ALLOWED) H_UI
ifstr $(H_UI) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(KeyParam)
goto fatalregistry
endif
endif
; for 3065 ConnectionType registry >>>>>>>>>>>>>>>>>
CreateRegKey $(H_UI) {"ConnectionType",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" H_ConnectionType
ifstr $(H_ConnectionType) == $(KeyNull)
OpenRegKey $(H_UI) "" "ConnectionType" $(MAXIMUM_ALLOWED) H_ConnectionType
ifstr $(H_ConnectionType) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(H_UI)
goto fatalregistry
endif
endif
set NewValueList = $(ConnectionTypeParamList)
Shell $(UtilityInf), AddValueList, $(H_ConnectionType), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
; for 3065 ConnectionType Enum registry
CreateRegKey $(H_ConnectionType) {"enum",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" H_Enum
ifstr $(H_Enum) == $(KeyNull)
OpenRegKey $(H_ConnectionType) "" "enum" $(MAXIMUM_ALLOWED) H_Enum
ifstr $(H_Enum) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(H_ConnectionType)
goto fatalregistry
endif
endif
set NewValueList = $(ConnectionTypeEnumList)
Shell $(UtilityInf), AddValueList, $(H_Enum), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(H_Enum)
CloseRegKey $(H_ConnectionType)
; for 3065 NetworkAddress registry >>>>>>>>>>>>>>>>>
CreateRegKey $(H_UI) {"NetworkAddress",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" H_NetworkAddress
ifstr $(H_NetworkAddress) == $(KeyNull)
OpenRegKey $(H_UI) "" "NetworkAddress" $(MAXIMUM_ALLOWED) H_NetworkAddress
ifstr $(H_NetworkAddress) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(H_UI)
goto fatalregistry
endif
endif
set NewValueList = $(NetworkAddressParamList)
Shell $(UtilityInf), AddValueList, $(H_NetworkAddress), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(H_NetworkAddress)
; for 3065 TransmitBuffers registry >>>>>>>>>>>>>>>>
CreateRegKey $(H_UI) {"TransmitBuffers",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" H_TransmitBuffers
ifstr $(H_TransmitBuffers) == $(KeyNull)
OpenRegKey $(H_UI) "" "TransmitBuffers" $(MAXIMUM_ALLOWED) H_TransmitBuffers
ifstr $(H_TransmitBuffers) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(H_UI)
goto fatalregistry
endif
endif
set NewValueList = $(TransmitBuffersParamList)
Shell $(UtilityInf), AddValueList, $(H_TransmitBuffers), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(H_TransmitBuffers)
; for 3065 ReceiveBuffers registry >>>>>>>>>>>>>>>>>
CreateRegKey $(H_UI) {"ReceiveBuffers",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" H_ReceiveBuffers
ifstr $(H_ReceiveBuffers) == $(KeyNull)
OpenRegKey $(H_UI) "" "ReceiveBuffers" $(MAXIMUM_ALLOWED) H_ReceiveBuffers
ifstr $(H_ReceiveBuffers) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(H_UI)
goto fatalregistry
endif
endif
set NewValueList = $(ReceiveBuffersParamList)
Shell $(UtilityInf), AddValueList, $(H_ReceiveBuffers), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(H_ReceiveBuffers)
; for 3065 FlowCtrl registry >>>>>>>>>>>>>>>>>>>>>>>
CreateRegKey $(H_UI) {"FlowCtrl",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" H_FlowCtrl
ifstr $(H_FlowCtrl) == $(KeyNull)
OpenRegKey $(H_UI) "" "FlowCtrl" $(MAXIMUM_ALLOWED) H_FlowCtrl
ifstr $(H_FlowCtrl) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(H_UI)
goto fatalregistry
endif
endif
set NewValueList = $(FlowCtrlParamList)
Shell $(UtilityInf), AddValueList, $(H_FlowCtrl), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
; for 3065 FlowCtrl Enum registry
CreateRegKey $(H_FlowCtrl) {"enum",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" H_Enum
ifstr $(H_Enum) == $(KeyNull)
OpenRegKey $(H_FlowCtrl) "" "enum" $(MAXIMUM_ALLOWED) H_Enum
ifstr $(H_Enum) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(H_FlowCtrl)
goto fatalregistry
endif
endif
set NewValueList = $(FlowCtrlEnumList)
Shell $(UtilityInf), AddValueList, $(H_Enum), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(H_Enum)
CloseRegKey $(H_FlowCtrl)
; for 3065 AdaptiveInt registry >>>>>>>>>>>>>>>>>>>>>>>
CreateRegKey $(H_UI) {"AdaptiveInt",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" H_AdaptiveInt
ifstr $(H_AdaptiveInt) == $(KeyNull)
OpenRegKey $(H_UI) "" "AdaptiveInt" $(MAXIMUM_ALLOWED) H_AdaptiveInt
ifstr $(H_AdaptiveInt) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(H_UI)
goto fatalregistry
endif
endif
set NewValueList = $(AdaptiveIntParamList)
Shell $(UtilityInf), AddValueList, $(H_AdaptiveInt), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
; for 3065 AdaptiveInt Enum registry
CreateRegKey $(H_AdaptiveInt) {"enum",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" H_Enum
ifstr $(H_Enum) == $(KeyNull)
OpenRegKey $(H_AdaptiveInt) "" "enum" $(MAXIMUM_ALLOWED) H_Enum
ifstr $(H_Enum) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(H_AdaptiveInt)
goto fatalregistry
endif
endif
set NewValueList = $(DisableEnableEnumList)
Shell $(UtilityInf), AddValueList, $(H_Enum), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(H_Enum)
CloseRegKey $(H_AdaptiveInt)
CloseRegKey $(KeyParam)
; Update Software Title
set ParamPath = "SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$(IE_KeyName)
OpenRegKey $(!REG_H_LOCAL) "" $(ParamPath) $(!REG_KEY_WRITE) KeyParam
SetRegValue $(KeyParam) {Title,$(NoTitle),$(!REG_VT_SZ),"["$(IE_KeyName)"] "$(ProductHardware$(Option)$(Sub)Title)}
CloseRegKey $(KeyParam)
; Update Version Number
set ParamPath = "SOFTWARE\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
OpenRegKey $(!REG_H_LOCAL) "" $(ParamPath) $(!REG_KEY_WRITE) KeyParam
SetRegValue $(KeyParam) {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)}
SetRegValue $(KeyParam) {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)}
CloseRegKey $(KeyParam)
endif
endif
CloseRegKey $(IE_KeyService)
endif
CloseRegKey $(IE_Card)
EndForListDo
CloseRegKey $(IE_KeyNetcards)
EndForListDo
; setting default value for 3043 *****************************
ForListDo $(AdapterList43)
set BusNum = *( $($), 1 )
set DeviceNum = *( $($), 2 )
set Sub = "VT3043"
set Description = $(ProductHardware$(Option)Description)
set Product = $(ProductHardwareName)
OpenRegKey $(!REG_H_LOCAL) +
"" +
"SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkCards" +
$(!REG_KEY_READ) +
IE_KeyNetcards
EnumRegKey $(IE_KeyNetcards) IE_KeyNameList
ForListDo $(IE_KeyNameList)
set IE_KeyName = *( $($), 1 )
OpenRegKey $(IE_KeyNetcards) "" $(IE_KeyName) $(!REG_KEY_READ) IE_Card
ifstr $(IE_Card) == $(KeyNull)
Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Goto fatalregistry
endif
GetRegValue $(IE_Card),"ProductName", ProductNameInfo
set CardProductName = *( $(ProductNameInfo), 4 )
ifstr(i) $(CardProductName) == $(Product)
GetRegValue $(IE_Card), "ServiceName", ServiceNameInfo
set ServiceName = *( $(ServiceNameInfo), 4 )
OpenRegKey $(!REG_H_LOCAL) +
"" +
$(!NTN_ServiceBase)"\"$(ServiceName)"\Parameters" +
$(!REG_KEY_READWRITE) +
IE_KeyService
ifstr $(IE_KeyService) == $(KeyNull)
Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Goto fatalregistry
endif
GetRegValue $(IE_KeyService), "BusNumber", BusInfo
GetRegValue $(IE_KeyService), "SlotNumber", SlotInfo
set CardBusNum = *( $(BusInfo), 4 )
set CardSlotNum = *( $(SlotInfo), 4 )
ifint $(CardBusNum) == $(BusNum)
ifint $(CardSlotNum) == $(DeviceNum)
; Update InfName and InfOption
OpenRegKey $(IE_Card) "" "NetRules" $(MAXIMUM_ALLOWED) H_NetRules
ifstr $(H_NetRules) == $(KeyNull)
Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Goto fatalregistry
endif
SetRegValue $(H_NetRules) {InfName,$(NoTitle),$(!REG_VT_SZ),$(InfFileName)}
SetRegValue $(H_NetRules) {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}
CloseRegKey $(H_NetRules)
; Set default value
set NewValueList = $($(Sub)DefaultParamList)
set ParamPath = $(!NTN_ServiceBase)"\"$(ServiceName)"\Parameters"
OpenRegKey $(!REG_H_LOCAL) "" $(ParamPath) $(!REG_KEY_WRITE) KeyParam
Shell $(UtilityInf), AddValueList, $(KeyParam), $(NewValueList)
; for 3043 UI registry >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
CreateRegKey $(KeyParam) {"UI",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" H_UI
ifstr $(H_UI) == $(KeyNull)
OpenRegKey $(KeyParam) "" "UI" $(MAXIMUM_ALLOWED) H_UI
ifstr $(H_UI) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(KeyParam)
goto fatalregistry
endif
endif
; for 3043 ConnectionType registry >>>>>>>>>>>>>>>>>
CreateRegKey $(H_UI) {"ConnectionType",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" H_ConnectionType
ifstr $(H_ConnectionType) == $(KeyNull)
OpenRegKey $(H_UI) "" "ConnectionType" $(MAXIMUM_ALLOWED) H_ConnectionType
ifstr $(H_ConnectionType) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(H_UI)
goto fatalregistry
endif
endif
set NewValueList = $(ConnectionTypeParamList)
Shell $(UtilityInf), AddValueList, $(H_ConnectionType), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
; for 3043 ConnectionType Enum registry
CreateRegKey $(H_ConnectionType) {"enum",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" H_Enum
ifstr $(H_Enum) == $(KeyNull)
OpenRegKey $(H_ConnectionType) "" "enum" $(MAXIMUM_ALLOWED) H_Enum
ifstr $(H_Enum) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(H_ConnectionType)
goto fatalregistry
endif
endif
set NewValueList = $(ConnectionTypeEnumList)
Shell $(UtilityInf), AddValueList, $(H_Enum), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(H_Enum)
CloseRegKey $(H_ConnectionType)
; for 3043 NetworkAddress registry >>>>>>>>>>>>>>>>>
CreateRegKey $(H_UI) {"NetworkAddress",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" H_NetworkAddress
ifstr $(H_NetworkAddress) == $(KeyNull)
OpenRegKey $(H_UI) "" "NetworkAddress" $(MAXIMUM_ALLOWED) H_NetworkAddress
ifstr $(H_NetworkAddress) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(H_UI)
goto fatalregistry
endif
endif
set NewValueList = $(NetworkAddressParamList)
Shell $(UtilityInf), AddValueList, $(H_NetworkAddress), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(H_NetworkAddress)
; for 3043 TransmitBuffers registry >>>>>>>>>>>>>>>>
CreateRegKey $(H_UI) {"TransmitBuffers",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" H_TransmitBuffers
ifstr $(H_TransmitBuffers) == $(KeyNull)
OpenRegKey $(H_UI) "" "TransmitBuffers" $(MAXIMUM_ALLOWED) H_TransmitBuffers
ifstr $(H_TransmitBuffers) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(H_UI)
goto fatalregistry
endif
endif
set NewValueList = $($(Sub)TransmitBuffersParamList)
Shell $(UtilityInf), AddValueList, $(H_TransmitBuffers), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(H_TransmitBuffers)
; for 3043 ReceiveBuffers registry >>>>>>>>>>>>>>>>>
CreateRegKey $(H_UI) {"ReceiveBuffers",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" H_ReceiveBuffers
ifstr $(H_ReceiveBuffers) == $(KeyNull)
OpenRegKey $(H_UI) "" "ReceiveBuffers" $(MAXIMUM_ALLOWED) H_ReceiveBuffers
ifstr $(H_ReceiveBuffers) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(H_UI)
goto fatalregistry
endif
endif
set NewValueList = $(ReceiveBuffersParamList)
Shell $(UtilityInf), AddValueList, $(H_ReceiveBuffers), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(H_ReceiveBuffers)
CloseRegKey $(KeyParam)
; Update Software Title
set ParamPath = "SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$(IE_KeyName)
OpenRegKey $(!REG_H_LOCAL) "" $(ParamPath) $(!REG_KEY_WRITE) KeyParam
SetRegValue $(KeyParam) {Title,$(NoTitle),$(!REG_VT_SZ),"["$(IE_KeyName)"] "$(ProductHardware$(Option)$(Sub)Title)}
CloseRegKey $(KeyParam)
; Update Version Number
set ParamPath = "SOFTWARE\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
OpenRegKey $(!REG_H_LOCAL) "" $(ParamPath) $(!REG_KEY_WRITE) KeyParam
SetRegValue $(KeyParam) {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)}
SetRegValue $(KeyParam) {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)}
CloseRegKey $(KeyParam)
endif
endif
CloseRegKey $(IE_KeyService)
endif
CloseRegKey $(IE_Card)
EndForListDo
CloseRegKey $(IE_KeyNetcards)
EndForListDo
endif
; end of setting default values
ifint $(OldVersionExisted) == $(FALSE)
Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), +
$(ProductSoftwareName), +
$(ProductSoftwareTitle), +
$(STF_CONTEXTINFNAME), +
$(ProductSoftwareImagePath$(TargetOS)), +
"kernel", +
"NDIS", +
{}, +
"", +
$(NetEventDLL)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
Set OEM_ABANDON_SOFTWARE = TRUE
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
EndWait
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
CloseRegKey $($R4)
CloseRegKey $($R5)
goto fatalregistry
endif
Set SoftProductKey = $($R1)
Set SoftNetRuleKey = $($R2)
Set SoftServiceKey = $($R3)
Set SoftParameterKey = $($R4)
Set SoftLinkageKey = $($R5)
set NewValueList = { {SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
{MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
{MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
{Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*( $(Now),1 )} }
Shell $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
EndWait
CloseRegKey $(SoftProductKey)
CloseRegKey $(SoftNetRuleKey)
CloseRegKey $(SoftServiceKey)
CloseRegKey $(SoftParameterKey)
CloseRegKey $(SoftLinkageKey)
goto fatalregistry
endif
set NewValueList = { {type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
{use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
{bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
{bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareSWBindable)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)} }
Shell $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
CloseRegKey $(SoftProductKey)
CloseRegKey $(SoftNetRuleKey)
CloseRegKey $(SoftServiceKey)
CloseRegKey $(SoftParameterKey)
CloseRegKey $(SoftLinkageKey)
Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
EndWait
goto fatalregistry
endif
endif
;----------------------------------------------------------------------------
InstallAdapter106S =+
ifstr(i) $(AdapterList106S) == {}
goto InstallAdapter106J
endif
ForListDo $(AdapterList106S)
set BusNum = *($($),1)
set DeviceNum = *($($),2)
set FunctionNum = *($($),3)
set Sub = "VT3106S"
Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(BusNum), +
$(DeviceNum), +
$(ProductHardware$(Option)$(Sub)Title), +
$(ProductHardwareName), +
"YES"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr $($R0) != "NO_ERROR"
set Error = $($R0)
goto fatal
endif
ifstr(i) $($R1) != "YES"
Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName), +
$(STF_CONTEXTINFNAME), +
$(ProductKeyName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifint $($R4) != -1
Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
EndWait
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
goto fatalregistry
endif
; support unattended mode installation under windows NT 4.0 (AJ 03/22/1999)
ifstr $(!STF_GUI_UNATTENDED) != "YES"
ui pop 1
endif
Set HardNetCardKey = $($R1)
Set HardNetRuleKey = $($R2)
Set HardParameterKey = $($R3)
set AdapterNumber = $($R4)
set NewValueList = { {Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)$(Sub)Title)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)} }
Shell $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set BusTypeNum = 5
set NewValueList = { {AdapterType,$(NoTitle),$(!REG_VT_DWORD),$(Adapter$(Option)Type)},+
{MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
{BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+
{AdapterCFID,$(NoTitle),$(!REG_VT_DWORD),$(VT3106SCFID)} }
Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
; for 3106S registery
set NewValueList = $(VT3106SDefaultParamList)
Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
; for 3106S UI registry >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
CreateRegKey $(HardParameterKey) {"UI",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" UIHandle
ifstr $(UIHandle) == $(KeyNull)
OpenRegKey $(HardParameterKey) "" "UI" $(MAXIMUM_ALLOWED) UIHandle
endif
ifstr $(UIHandle) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(HardParameterKey)
goto fatalregistry
endif
; for 3106S ConnectionType registry >>>>>>>>>>>>>>>>>>>>>>>
CreateRegKey $(UIHandle) {"ConnectionType",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" ConnectionTypeHandle
ifstr $(ConnectionTypeHandle) == $(KeyNull)
OpenRegKey $(UIHandle) "" "ConnectionType" $(MAXIMUM_ALLOWED) ConnectionTypeHandle
endif
ifstr $(ConnectionTypeHandle) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(UIHandle)
goto fatalregistry
endif
set NewValueList = $(ConnectionTypeParamList)
Shell $(UtilityInf), AddValueList, $(ConnectionTypeHandle), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
; for 3106S ConnectionType Enum registry
CreateRegKey $(ConnectionTypeHandle) {"enum",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" EnumHandle
ifstr $(EnumHandle) == $(KeyNull)
OpenRegKey $(ConnectionTypeHandle) "" "enum" $(MAXIMUM_ALLOWED) EnumHandle
endif
ifstr $(EnumHandle) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(ConnectionTypeHandle)
goto fatalregistry
endif
set NewValueList = $(ConnectionTypeEnumList)
Shell $(UtilityInf), AddValueList, $(EnumHandle), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(EnumHandle)
CloseRegKey $(ConnectionTypeHandle)
; for 3106S NetworkAddress registry >>>>>>>>>>>>>>>>>>>>>>>
CreateRegKey $(UIHandle) {"NetworkAddress",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" NetworkAddressHandle
ifstr $(NetworkAddressHandle) == $(KeyNull)
OpenRegKey $(UIHandle) "" "NetworkAddress" $(MAXIMUM_ALLOWED) NetworkAddressHandle
endif
ifstr $(NetworkAddressHandle) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(UIHandle)
goto fatalregistry
endif
set NewValueList = $(NetworkAddressParamList)
Shell $(UtilityInf), AddValueList, $(NetworkAddressHandle), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(NetworkAddressHandle)
; for 3106S TransmitBuffers registry >>>>>>>>>>>>>>>>>>>>>>
CreateRegKey $(UIHandle) {"TransmitBuffers",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" TransmitBuffersHandle
ifstr $(TransmitBuffersHandle) == $(KeyNull)
OpenRegKey $(UIHandle) "" "TransmitBuffers" $(MAXIMUM_ALLOWED) TransmitBuffersHandle
endif
ifstr $(TransmitBuffersHandle) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(UIHandle)
goto fatalregistry
endif
set NewValueList = $(TransmitBuffersParamList)
Shell $(UtilityInf), AddValueList, $(TransmitBuffersHandle), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(TransmitBuffersHandle)
; for 3106S ReceiveBuffers registry >>>>>>>>>>>>>>>>>>>>>>>
CreateRegKey $(UIHandle) {"ReceiveBuffers",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" ReceiveBuffersHandle
ifstr $(ReceiveBuffersHandle) == $(KeyNull)
OpenRegKey $(UIHandle) "" "ReceiveBuffers" $(MAXIMUM_ALLOWED) ReceiveBuffersHandle
endif
ifstr $(ReceiveBuffersHandle) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(UIHandle)
goto fatalregistry
endif
set NewValueList = $(ReceiveBuffersParamList)
Shell $(UtilityInf), AddValueList, $(ReceiveBuffersHandle), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(ReceiveBuffersHandle)
; for 3106S FlowCtrl registry >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
CreateRegKey $(UIHandle) {"FlowCtrl",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" FlowCtrlHandle
ifstr $(FlowCtrlHandle) == $(KeyNull)
OpenRegKey $(UIHandle) "" "FlowCtrl" $(MAXIMUM_ALLOWED) FlowCtrlHandle
endif
ifstr $(FlowCtrlHandle) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(UIHandle)
goto fatalregistry
endif
set NewValueList = $(FlowCtrlParamList)
Shell $(UtilityInf), AddValueList, $(FlowCtrlHandle), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
; for 3106S FlowCtrl Enum registry
CreateRegKey $(FlowCtrlHandle) {"enum",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" EnumHandle
ifstr $(EnumHandle) == $(KeyNull)
OpenRegKey $(FlowCtrlHandle) "" "enum" $(MAXIMUM_ALLOWED) EnumHandle
endif
ifstr $(EnumHandle) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(FlowCtrlHandle)
goto fatalregistry
endif
set NewValueList = $(FlowCtrlEnumList)
Shell $(UtilityInf), AddValueList, $(EnumHandle), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(EnumHandle)
CloseRegKey $(FlowCtrlHandle)
; for 3106S AdaptiveInt registry >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
CreateRegKey $(UIHandle) {"AdaptiveInt",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" AdaptiveIntHandle
ifstr $(AdaptiveIntHandle) == $(KeyNull)
OpenRegKey $(UIHandle) "" "AdaptiveInt" $(MAXIMUM_ALLOWED) AdaptiveIntHandle
endif
ifstr $(AdaptiveIntHandle) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(UIHandle)
goto fatalregistry
endif
set NewValueList = $(AdaptiveIntParamList)
Shell $(UtilityInf), AddValueList, $(AdaptiveIntHandle), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
; for 3106S AdaptiveInt Enum registry
CreateRegKey $(AdaptiveIntHandle) {"enum",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" EnumHandle
ifstr $(EnumHandle) == $(KeyNull)
OpenRegKey $(AdaptiveIntHandle) "" "enum" $(MAXIMUM_ALLOWED) EnumHandle
endif
ifstr $(EnumHandle) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(AdaptiveIntHandle)
goto fatalregistry
endif
set NewValueList = $(DisableEnableEnumList)
Shell $(UtilityInf), AddValueList, $(EnumHandle), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(EnumHandle)
CloseRegKey $(AdaptiveIntHandle)
; for 3106S 8021pqtag registry >>>>>>>>>>>>>>>>>>>>>>>>>>>
CreateRegKey $(UIHandle) {"8021pqtag",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" H_8021pqtag
ifstr $(H_8021pqtag) == $(KeyNull)
OpenRegKey $(UIHandle) "" "8021pqtag" $(MAXIMUM_ALLOWED) H_8021pqtag
endif
ifstr $(H_8021pqtag) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(UIHandle)
goto fatalregistry
endif
set NewValueList = $(8021pqtagParamList)
Shell $(UtilityInf), AddValueList, $(H_8021pqtag), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
; for 3106S 8021pqtag Enum registry
CreateRegKey $(H_8021pqtag) {"enum",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" EnumHandle
ifstr $(EnumHandle) == $(KeyNull)
OpenRegKey $(H_8021pqtag) "" "enum" $(MAXIMUM_ALLOWED) EnumHandle
endif
ifstr $(EnumHandle) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(H_8021pqtag)
goto fatalregistry
endif
set NewValueList = $(DisableEnableEnumList)
Shell $(UtilityInf), AddValueList, $(EnumHandle), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(EnumHandle)
CloseRegKey $(H_8021pqtag)
; for 3106S VLANID registry >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
CreateRegKey $(UIHandle) {"VLANID",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" VLANIDHandle
ifstr $(VLANIDHandle) == $(KeyNull)
OpenRegKey $(UIHandle) "" "VLANID" $(MAXIMUM_ALLOWED) VLANIDHandle
endif
ifstr $(VLANIDHandle) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(UIHandle)
goto fatalregistry
endif
set NewValueList = $(VLANIDParamList)
Shell $(UtilityInf), AddValueList, $(VLANIDHandle), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(VLANIDHandle)
CloseRegKey $(UIHandle)
endif
set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
set NewValueList = { {type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardware$(Option)Type)},+
{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardware$(Option)Class)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)} }
Shell $(UtilityInf), AddValueList, $(HardNetRuleKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(HardNetCardKey)
CloseRegKey $(HardNetRuleKey)
set NewValueList = { {BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNum)},+
{SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(DeviceNum)},+
{FunctionNumber,$(NoTitle),$(!REG_VT_DWORD),$(FunctionNum)} }
Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
CloseRegKey $(HardParameterKey)
EndForListDo
;----------------------------------------------------------------------------
InstallAdapter106J =+
ifstr(i) $(AdapterList106J) == {}
goto InstallAdapter65
endif
ForListDo $(AdapterList106J)
set BusNum = *($($),1)
set DeviceNum = *($($),2)
set FunctionNum = *($($),3)
set Sub = "VT3106J"
Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(BusNum), +
$(DeviceNum), +
$(ProductHardware$(Option)$(Sub)Title), +
$(ProductHardwareName), +
"YES"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr $($R0) != "NO_ERROR"
set Error = $($R0)
goto fatal
endif
ifstr(i) $($R1) != "YES"
Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName), +
$(STF_CONTEXTINFNAME), +
$(ProductKeyName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifint $($R4) != -1
Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
EndWait
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
goto fatalregistry
endif
; support unattended mode installation under windows NT 4.0 (AJ 03/22/1999)
ifstr $(!STF_GUI_UNATTENDED) != "YES"
ui pop 1
endif
Set HardNetCardKey = $($R1)
Set HardNetRuleKey = $($R2)
Set HardParameterKey = $($R3)
set AdapterNumber = $($R4)
set NewValueList = { {Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)$(Sub)Title)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)} }
Shell $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set BusTypeNum = 5
set NewValueList = { {AdapterType,$(NoTitle),$(!REG_VT_DWORD),$(Adapter$(Option)Type)},+
{MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
{BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+
{AdapterCFID,$(NoTitle),$(!REG_VT_DWORD),$(VT3106JCFID)} }
Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
; for 3106J registery
set NewValueList = $(VT3106JDefaultParamList)
Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
; for 3106J UI registry >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
CreateRegKey $(HardParameterKey) {"UI",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" UIHandle
ifstr $(UIHandle) == $(KeyNull)
OpenRegKey $(HardParameterKey) "" "UI" $(MAXIMUM_ALLOWED) UIHandle
endif
ifstr $(UIHandle) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(HardParameterKey)
goto fatalregistry
endif
; for 3106J ConnectionType registry >>>>>>>>>>>>>>>>>>>>>>>
CreateRegKey $(UIHandle) {"ConnectionType",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" ConnectionTypeHandle
ifstr $(ConnectionTypeHandle) == $(KeyNull)
OpenRegKey $(UIHandle) "" "ConnectionType" $(MAXIMUM_ALLOWED) ConnectionTypeHandle
endif
ifstr $(ConnectionTypeHandle) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(UIHandle)
goto fatalregistry
endif
set NewValueList = $(ConnectionTypeParamList)
Shell $(UtilityInf), AddValueList, $(ConnectionTypeHandle), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
; for 3106J ConnectionType Enum registry
CreateRegKey $(ConnectionTypeHandle) {"enum",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" EnumHandle
ifstr $(EnumHandle) == $(KeyNull)
OpenRegKey $(ConnectionTypeHandle) "" "enum" $(MAXIMUM_ALLOWED) EnumHandle
endif
ifstr $(EnumHandle) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(ConnectionTypeHandle)
goto fatalregistry
endif
set NewValueList = $(ConnectionTypeEnumList)
Shell $(UtilityInf), AddValueList, $(EnumHandle), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(EnumHandle)
CloseRegKey $(ConnectionTypeHandle)
; for 3106J NetworkAddress registry >>>>>>>>>>>>>>>>>>>>>>>
CreateRegKey $(UIHandle) {"NetworkAddress",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" NetworkAddressHandle
ifstr $(NetworkAddressHandle) == $(KeyNull)
OpenRegKey $(UIHandle) "" "NetworkAddress" $(MAXIMUM_ALLOWED) NetworkAddressHandle
endif
ifstr $(NetworkAddressHandle) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(UIHandle)
goto fatalregistry
endif
set NewValueList = $(NetworkAddressParamList)
Shell $(UtilityInf), AddValueList, $(NetworkAddressHandle), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(NetworkAddressHandle)
; for 3106J TransmitBuffers registry >>>>>>>>>>>>>>>>>>>>>>
CreateRegKey $(UIHandle) {"TransmitBuffers",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" TransmitBuffersHandle
ifstr $(TransmitBuffersHandle) == $(KeyNull)
OpenRegKey $(UIHandle) "" "TransmitBuffers" $(MAXIMUM_ALLOWED) TransmitBuffersHandle
endif
ifstr $(TransmitBuffersHandle) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(UIHandle)
goto fatalregistry
endif
set NewValueList = $(TransmitBuffersParamList)
Shell $(UtilityInf), AddValueList, $(TransmitBuffersHandle), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(TransmitBuffersHandle)
; for 3106J ReceiveBuffers registry >>>>>>>>>>>>>>>>>>>>>>>
CreateRegKey $(UIHandle) {"ReceiveBuffers",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" ReceiveBuffersHandle
ifstr $(ReceiveBuffersHandle) == $(KeyNull)
OpenRegKey $(UIHandle) "" "ReceiveBuffers" $(MAXIMUM_ALLOWED) ReceiveBuffersHandle
endif
ifstr $(ReceiveBuffersHandle) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(UIHandle)
goto fatalregistry
endif
set NewValueList = $(ReceiveBuffersParamList)
Shell $(UtilityInf), AddValueList, $(ReceiveBuffersHandle), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(ReceiveBuffersHandle)
; for 3106J FlowCtrl registry >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
CreateRegKey $(UIHandle) {"FlowCtrl",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" FlowCtrlHandle
ifstr $(FlowCtrlHandle) == $(KeyNull)
OpenRegKey $(UIHandle) "" "FlowCtrl" $(MAXIMUM_ALLOWED) FlowCtrlHandle
endif
ifstr $(FlowCtrlHandle) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(UIHandle)
goto fatalregistry
endif
set NewValueList = $(FlowCtrlParamList)
Shell $(UtilityInf), AddValueList, $(FlowCtrlHandle), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
; for 3106J FlowCtrl Enum registry
CreateRegKey $(FlowCtrlHandle) {"enum",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" EnumHandle
ifstr $(EnumHandle) == $(KeyNull)
OpenRegKey $(FlowCtrlHandle) "" "enum" $(MAXIMUM_ALLOWED) EnumHandle
endif
ifstr $(EnumHandle) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(FlowCtrlHandle)
goto fatalregistry
endif
set NewValueList = $(FlowCtrlEnumList)
Shell $(UtilityInf), AddValueList, $(EnumHandle), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(EnumHandle)
CloseRegKey $(FlowCtrlHandle)
; for 3106J AdaptiveInt registry >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
CreateRegKey $(UIHandle) {"AdaptiveInt",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" AdaptiveIntHandle
ifstr $(AdaptiveIntHandle) == $(KeyNull)
OpenRegKey $(UIHandle) "" "AdaptiveInt" $(MAXIMUM_ALLOWED) AdaptiveIntHandle
endif
ifstr $(AdaptiveIntHandle) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(UIHandle)
goto fatalregistry
endif
set NewValueList = $(AdaptiveIntParamList)
Shell $(UtilityInf), AddValueList, $(AdaptiveIntHandle), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
; for 3106J AdaptiveInt Enum registry
CreateRegKey $(AdaptiveIntHandle) {"enum",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" EnumHandle
ifstr $(EnumHandle) == $(KeyNull)
OpenRegKey $(AdaptiveIntHandle) "" "enum" $(MAXIMUM_ALLOWED) EnumHandle
endif
ifstr $(EnumHandle) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(AdaptiveIntHandle)
goto fatalregistry
endif
set NewValueList = $(DisableEnableEnumList)
Shell $(UtilityInf), AddValueList, $(EnumHandle), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(EnumHandle)
CloseRegKey $(AdaptiveIntHandle)
CloseRegKey $(UIHandle)
endif
set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
set NewValueList = { {type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardware$(Option)Type)},+
{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardware$(Option)Class)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)} }
Shell $(UtilityInf), AddValueList, $(HardNetRuleKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(HardNetCardKey)
CloseRegKey $(HardNetRuleKey)
set NewValueList = { {BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNum)},+
{SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(DeviceNum)},+
{FunctionNumber,$(NoTitle),$(!REG_VT_DWORD),$(FunctionNum)} }
Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
CloseRegKey $(HardParameterKey)
EndForListDo
;----------------------------------------------------------------------------
InstallAdapter65 =+
ifstr(i) $(AdapterList65) == {}
goto InstallAdapter43
endif
ForListDo $(AdapterList65)
set BusNum = *($($),1)
set DeviceNum = *($($),2)
set FunctionNum = *($($),3)
set Sub = "VT3065"
Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(BusNum), +
$(DeviceNum), +
$(ProductHardware$(Option)$(Sub)Title), +
$(ProductHardwareName), +
"YES"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr $($R0) != "NO_ERROR"
set Error = $($R0)
goto fatal
endif
ifstr(i) $($R1) != "YES"
Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName), +
$(STF_CONTEXTINFNAME), +
$(ProductKeyName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifint $($R4) != -1
Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
EndWait
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
goto fatalregistry
endif
; support unattended mode installation under windows NT 4.0 (AJ 03/22/1999)
ifstr $(!STF_GUI_UNATTENDED) != "YES"
ui pop 1
endif
Set HardNetCardKey = $($R1)
Set HardNetRuleKey = $($R2)
Set HardParameterKey = $($R3)
set AdapterNumber = $($R4)
set NewValueList = { {Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)$(Sub)Title)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)} }
Shell $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set BusTypeNum = 5
set NewValueList = { {AdapterType,$(NoTitle),$(!REG_VT_DWORD),$(Adapter$(Option)Type)},+
{MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
{BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+
{AdapterCFID,$(NoTitle),$(!REG_VT_DWORD),$(VT3065CFID)} }
Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
; for 3065 registry
set NewValueList = $(VT3065DefaultParamList)
Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
; for 3065 UI registry >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
CreateRegKey $(HardParameterKey) {"UI",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" UIHandle
ifstr $(UIHandle) == $(KeyNull)
OpenRegKey $(HardParameterKey) "" "UI" $(MAXIMUM_ALLOWED) UIHandle
endif
ifstr $(UIHandle) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(HardParameterKey)
goto fatalregistry
endif
; for 3065 ConnectionType registry >>>>>>>>>>>>>>>>>>>>>>>
CreateRegKey $(UIHandle) {"ConnectionType",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" ConnectionTypeHandle
ifstr $(ConnectionTypeHandle) == $(KeyNull)
OpenRegKey $(UIHandle) "" "ConnectionType" $(MAXIMUM_ALLOWED) ConnectionTypeHandle
endif
ifstr $(ConnectionTypeHandle) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(UIHandle)
goto fatalregistry
endif
set NewValueList = $(ConnectionTypeParamList)
Shell $(UtilityInf), AddValueList, $(ConnectionTypeHandle), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
; for 3065 ConnectionType Enum registry
CreateRegKey $(ConnectionTypeHandle) {"enum",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" EnumHandle
ifstr $(EnumHandle) == $(KeyNull)
OpenRegKey $(ConnectionTypeHandle) "" "enum" $(MAXIMUM_ALLOWED) EnumHandle
endif
ifstr $(EnumHandle) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(ConnectionTypeHandle)
goto fatalregistry
endif
set NewValueList = $(ConnectionTypeEnumList)
Shell $(UtilityInf), AddValueList, $(EnumHandle), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(EnumHandle)
CloseRegKey $(ConnectionTypeHandle)
; for 3065 NetworkAddress registry >>>>>>>>>>>>>>>>>>>>>>>
CreateRegKey $(UIHandle) {"NetworkAddress",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" NetworkAddressHandle
ifstr $(NetworkAddressHandle) == $(KeyNull)
OpenRegKey $(UIHandle) "" "NetworkAddress" $(MAXIMUM_ALLOWED) NetworkAddressHandle
endif
ifstr $(NetworkAddressHandle) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(UIHandle)
goto fatalregistry
endif
set NewValueList = $(NetworkAddressParamList)
Shell $(UtilityInf), AddValueList, $(NetworkAddressHandle), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(NetworkAddressHandle)
; for 3065 TransmitBuffers registry >>>>>>>>>>>>>>>>>>>>>>
CreateRegKey $(UIHandle) {"TransmitBuffers",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" TransmitBuffersHandle
ifstr $(TransmitBuffersHandle) == $(KeyNull)
OpenRegKey $(UIHandle) "" "TransmitBuffers" $(MAXIMUM_ALLOWED) TransmitBuffersHandle
endif
ifstr $(TransmitBuffersHandle) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(UIHandle)
goto fatalregistry
endif
set NewValueList = $(TransmitBuffersParamList)
Shell $(UtilityInf), AddValueList, $(TransmitBuffersHandle), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(TransmitBuffersHandle)
; for 3065 ReceiveBuffers registry >>>>>>>>>>>>>>>>>>>>>>>
CreateRegKey $(UIHandle) {"ReceiveBuffers",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" ReceiveBuffersHandle
ifstr $(ReceiveBuffersHandle) == $(KeyNull)
OpenRegKey $(UIHandle) "" "ReceiveBuffers" $(MAXIMUM_ALLOWED) ReceiveBuffersHandle
endif
ifstr $(ReceiveBuffersHandle) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(UIHandle)
goto fatalregistry
endif
set NewValueList = $(ReceiveBuffersParamList)
Shell $(UtilityInf), AddValueList, $(ReceiveBuffersHandle), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(ReceiveBuffersHandle)
; for 3065 FlowCtrl registry >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
CreateRegKey $(UIHandle) {"FlowCtrl",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" FlowCtrlHandle
ifstr $(FlowCtrlHandle) == $(KeyNull)
OpenRegKey $(UIHandle) "" "FlowCtrl" $(MAXIMUM_ALLOWED) FlowCtrlHandle
endif
ifstr $(FlowCtrlHandle) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(UIHandle)
goto fatalregistry
endif
set NewValueList = $(FlowCtrlParamList)
Shell $(UtilityInf), AddValueList, $(FlowCtrlHandle), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
; for 3065 FlowCtrl Enum registry
CreateRegKey $(FlowCtrlHandle) {"enum",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" EnumHandle
ifstr $(EnumHandle) == $(KeyNull)
OpenRegKey $(FlowCtrlHandle) "" "enum" $(MAXIMUM_ALLOWED) EnumHandle
endif
ifstr $(EnumHandle) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(FlowCtrlHandle)
goto fatalregistry
endif
set NewValueList = $(FlowCtrlEnumList)
Shell $(UtilityInf), AddValueList, $(EnumHandle), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(EnumHandle)
CloseRegKey $(FlowCtrlHandle)
; for 3065 AdaptiveInt registry >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
CreateRegKey $(UIHandle) {"AdaptiveInt",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" AdaptiveIntHandle
ifstr $(AdaptiveIntHandle) == $(KeyNull)
OpenRegKey $(UIHandle) "" "AdaptiveInt" $(MAXIMUM_ALLOWED) AdaptiveIntHandle
endif
ifstr $(AdaptiveIntHandle) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(UIHandle)
goto fatalregistry
endif
set NewValueList = $(AdaptiveIntParamList)
Shell $(UtilityInf), AddValueList, $(AdaptiveIntHandle), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
; for 3065 AdaptiveInt Enum registry
CreateRegKey $(AdaptiveIntHandle) {"enum",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" EnumHandle
ifstr $(EnumHandle) == $(KeyNull)
OpenRegKey $(AdaptiveIntHandle) "" "enum" $(MAXIMUM_ALLOWED) EnumHandle
endif
ifstr $(EnumHandle) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(AdaptiveIntHandle)
goto fatalregistry
endif
set NewValueList = $(DisableEnableEnumList)
Shell $(UtilityInf), AddValueList, $(EnumHandle), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(EnumHandle)
CloseRegKey $(AdaptiveIntHandle)
CloseRegKey $(UIHandle)
endif
set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
set NewValueList = { {type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardware$(Option)Type)},+
{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardware$(Option)Class)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)} }
Shell $(UtilityInf), AddValueList, $(HardNetRuleKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(HardNetCardKey)
CloseRegKey $(HardNetRuleKey)
set NewValueList = { {BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNum)},+
{SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(DeviceNum)},+
{FunctionNumber,$(NoTitle),$(!REG_VT_DWORD),$(FunctionNum)} }
Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
CloseRegKey $(HardParameterKey)
EndForListDo
;----------------------------------------------------------------------------
InstallAdapter43 =+
ForListDo $(AdapterList43)
set BusNum = *($($),1)
set DeviceNum = *($($),2)
set FunctionNum = *($($),3)
set Sub = "VT3043"
Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(BusNum), +
$(DeviceNum), +
$(ProductHardware$(Option)$(Sub)Title), +
$(ProductHardwareName), +
"YES"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr $($R0) != "NO_ERROR"
set Error = $($R0)
goto fatal
endif
ifstr(i) $($R1) != "YES"
Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifint $($R4) != -1
Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != "NO_ERROR"
EndWait
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
goto fatalregistry
endif
; support unattended mode installation under windows NT 4.0 (AJ 03/22/1999)
ifstr $(!STF_GUI_UNATTENDED) != "YES"
ui pop 1
endif
Set HardNetCardKey = $($R1)
Set HardNetRuleKey = $($R2)
Set HardParameterKey = $($R3)
set AdapterNumber = $($R4)
set NewValueList = { {Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardware$(Option)$(Sub)Title)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)},+
{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)} }
Shell $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set BusTypeNum = 5
set NewValueList = { {AdapterType,$(NoTitle),$(!REG_VT_DWORD),$(Adapter$(Option)Type)},+
{MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
{BusType,$(NoTitle),$(!REG_VT_DWORD),$(BusTypeNum)},+
{AdapterCFID,$(NoTitle),$(!REG_VT_DWORD),$(VT3043CFID)} }
Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
; for 3043 registery
set NewValueList = $(VT3043DefaultParamList)
Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
; for 3043 UI registry >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
CreateRegKey $(HardParameterKey) {"UI",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" UIHandle
ifstr $(UIHandle) == $(KeyNull)
OpenRegKey $(HardParameterKey) "" "UI" $(MAXIMUM_ALLOWED) UIHandle
endif
ifstr $(UIHandle) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(HardParameterKey)
goto fatalregistry
endif
; for 3043 ConnectionType registry >>>>>>>>>>>>>>>>>>>>>>>
CreateRegKey $(UIHandle) {"ConnectionType",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" ConnectionTypeHandle
ifstr $(ConnectionTypeHandle) == $(KeyNull)
OpenRegKey $(UIHandle) "" "ConnectionType" $(MAXIMUM_ALLOWED) ConnectionTypeHandle
endif
ifstr $(ConnectionTypeHandle) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(UIHandle)
goto fatalregistry
endif
set NewValueList = $(ConnectionTypeParamList)
Shell $(UtilityInf), AddValueList, $(ConnectionTypeHandle), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
; for 3043 ConnectionType Enum registry
CreateRegKey $(ConnectionTypeHandle) {"enum",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" EnumHandle
ifstr $(EnumHandle) == $(KeyNull)
OpenRegKey $(ConnectionTypeHandle) "" "enum" $(MAXIMUM_ALLOWED) EnumHandle
endif
ifstr $(EnumHandle) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(ConnectionTypeHandle)
goto fatalregistry
endif
set NewValueList = $(ConnectionTypeEnumList)
Shell $(UtilityInf), AddValueList, $(EnumHandle), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(EnumHandle)
CloseRegKey $(ConnectionTypeHandle)
; for 3043 NetworkAddress registry >>>>>>>>>>>>>>>>>>>>>>>
CreateRegKey $(UIHandle) {"NetworkAddress",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" NetworkAddressHandle
ifstr $(NetworkAddressHandle) == $(KeyNull)
OpenRegKey $(UIHandle) "" "NetworkAddress" $(MAXIMUM_ALLOWED) NetworkAddressHandle
endif
ifstr $(NetworkAddressHandle) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(UIHandle)
goto fatalregistry
endif
set NewValueList = $(NetworkAddressParamList)
Shell $(UtilityInf), AddValueList, $(NetworkAddressHandle), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(NetworkAddressHandle)
; for 3043 TransmitBuffers registry >>>>>>>>>>>>>>>>>>>>>>
CreateRegKey $(UIHandle) {"TransmitBuffers",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" TransmitBuffersHandle
ifstr $(TransmitBuffersHandle) == $(KeyNull)
OpenRegKey $(UIHandle) "" "TransmitBuffers" $(MAXIMUM_ALLOWED) TransmitBuffersHandle
endif
ifstr $(TransmitBuffersHandle) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(UIHandle)
goto fatalregistry
endif
set NewValueList = $(VT3043TransmitBuffersParamList)
Shell $(UtilityInf), AddValueList, $(TransmitBuffersHandle), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(TransmitBuffersHandle)
; for 3043 ReceiveBuffers registry >>>>>>>>>>>>>>>>>>>>>>>
CreateRegKey $(UIHandle) {"ReceiveBuffers",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" ReceiveBuffersHandle
ifstr $(ReceiveBuffersHandle) == $(KeyNull)
OpenRegKey $(UIHandle) "" "ReceiveBuffers" $(MAXIMUM_ALLOWED) ReceiveBuffersHandle
endif
ifstr $(ReceiveBuffersHandle) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(UIHandle)
goto fatalregistry
endif
set NewValueList = $(ReceiveBuffersParamList)
Shell $(UtilityInf), AddValueList, $(ReceiveBuffersHandle), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(ReceiveBuffersHandle)
CloseRegKey $(UIHandle)
endif
set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
set NewValueList = { {type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardware$(Option)Type)},+
{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardware$(Option)Class)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)} }
Shell $(UtilityInf), AddValueList, $(HardNetRuleKey), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(HardNetCardKey)
CloseRegKey $(HardNetRuleKey)
set NewValueList = { {BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNum)},+
{SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(DeviceNum)},+
{FunctionNumber,$(NoTitle),$(!REG_VT_DWORD),$(FunctionNum)} }
Shell $(UtilityInf), AddValueList, $(HardParameterKey), $(NewValueList)
CloseRegKey $(HardParameterKey)
EndForListDo
;----------------------------------------------------------------------------
InstallAdapterOK =+
EndWait
goto successful
;----------------------------------------------------------------------------
updateparameters =+
ForListDo $(PropKeyNameList)
set KeyName = $($)
set PropIndex = ~($(PropKeyNameList), $(KeyName))
ifstr *($(SetResult), $(PropIndex)) != *($(CurrKeyValueList), $(PropIndex))
set NewRegValue = *($(SetResult), $(PropIndex))
set DispType = *($(DispTypeList), $(PropIndex))
ifstr(i) $(DispType) == "edit"
set NewValueList = {{$(KeyName),$(NoTitle),$(!REG_VT_SZ),$(NewRegValue)}}
Else
set NewValueList = {{$(KeyName),$(NoTitle),$(!REG_VT_DWORD),$(NewRegValue)}}
Endif
shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
Endif
endif
EndForListDo
goto successful
;----------------------------------------------------------------------------
bindingadapter =+
set Error = "Binding: Sorry, not yet implemented."
goto fatal
;----------------------------------------------------------------------------
removeadapter = +
Ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
Else
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), +
$(!NTN_RegBase)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
Endif
goto end
;----------------------------------------------------------------------------
UpgradeSoftware = +
; Upgrade each adapter
set KeyNetcards = "SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkCards"
OpenRegKey $(!REG_H_LOCAL) "" $(KeyNetcards) $(!REG_KEY_READ) H_Netcards
EnumRegKey $(H_Netcards) AdapterNumList
ForListDo $(AdapterNumList)
set AdapterNum = *( $($), 1 )
set H_Card = ""
OpenRegKey $(H_Netcards) "" $(AdapterNum) $(MAXIMUM_ALLOWED) H_Card
ifstr $(H_Card) == $(KeyNull)
Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Goto fatalregistry
endif
; Get ServiceName to open the registry
GetRegValue $(H_Card) "ServiceName" KeyServiceName
set AdapterServiceName = *( $(KeyServiceName), 4 )
set KeyCardService = $(!NTN_ServiceBase)"\"$(AdapterServiceName)"\parameters"
OpenRegKey $(!REG_H_LOCAL) "" $(KeyCardService) $(MAXIMUM_ALLOWED) H_AdapterService
ifstr $(H_AdapterService) == $(KeyNull)
Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Goto fatalregistry
endif
GetRegValue $(H_AdapterService) "AdapterCFID" ValueList
set AdapterCFID = *( $(ValueList), 4 )
; for UI registry >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
CreateRegKey $(H_AdapterService) {"UI",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" H_UI
ifstr $(H_UI) == $(KeyNull)
OpenRegKey $(H_AdapterService) "" "UI" $(MAXIMUM_ALLOWED) H_UI
ifstr $(H_UI) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(H_AdapterService)
goto fatalregistry
endif
endif
; for ConnectionType registry >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
CreateRegKey $(H_UI) {"ConnectionType",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" H_ConnectionType
ifstr $(H_ConnectionType) == $(KeyNull)
OpenRegKey $(H_UI) "" "ConnectionType" $(MAXIMUM_ALLOWED) H_ConnectionType
ifstr $(H_ConnectionType) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(H_UI)
goto fatalregistry
endif
endif
set NewValueList = $(ConnectionTypeParamList)
Shell $(UtilityInf), AddValueList, $(H_ConnectionType), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
; for ConnectionType Enum registry
CreateRegKey $(H_ConnectionType) {"enum",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" H_Enum
ifstr $(H_Enum) == $(KeyNull)
OpenRegKey $(H_ConnectionType) "" "enum" $(MAXIMUM_ALLOWED) H_Enum
ifstr $(H_Enum) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(H_ConnectionType)
goto fatalregistry
endif
endif
set NewValueList = $(ConnectionTypeEnumList)
Shell $(UtilityInf), AddValueList, $(H_Enum), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(H_Enum)
CloseRegKey $(H_ConnectionType)
; for NetworkAddress registry >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
CreateRegKey $(H_UI) {"NetworkAddress",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" H_NetworkAddress
ifstr $(H_NetworkAddress) == $(KeyNull)
OpenRegKey $(H_UI) "" "NetworkAddress" $(MAXIMUM_ALLOWED) H_NetworkAddress
ifstr $(H_NetworkAddress) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(H_UI)
goto fatalregistry
endif
endif
set NewValueList = $(NetworkAddressParamList)
Shell $(UtilityInf), AddValueList, $(H_NetworkAddress), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(H_NetworkAddress)
; for TransmitBuffers registry >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
CreateRegKey $(H_UI) {"TransmitBuffers",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" H_TransmitBuffers
ifstr $(H_TransmitBuffers) == $(KeyNull)
OpenRegKey $(H_UI) "" "TransmitBuffers" $(MAXIMUM_ALLOWED) H_TransmitBuffers
ifstr $(H_TransmitBuffers) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(H_UI)
goto fatalregistry
endif
endif
; for ReceiveBuffers registry >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
CreateRegKey $(H_UI) {"ReceiveBuffers",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" H_ReceiveBuffers
ifstr $(H_ReceiveBuffers) == $(KeyNull)
OpenRegKey $(H_UI) "" "ReceiveBuffers" $(MAXIMUM_ALLOWED) H_ReceiveBuffers
ifstr $(H_ReceiveBuffers) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(H_UI)
goto fatalregistry
endif
endif
Ifint $(AdapterCFID) == $(VT3106SCFID)
; Set 3106S TransmitBuffers value
set NewValueList = $(TransmitBuffersParamList)
Shell $(UtilityInf), AddValueList, $(H_TransmitBuffers), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(H_TransmitBuffers)
; Set 3106S ReceiveBuffers value
set NewValueList = $(ReceiveBuffersParamList)
Shell $(UtilityInf), AddValueList, $(H_ReceiveBuffers), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(H_ReceiveBuffers)
; for 3106S FlowCtrl registry >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
CreateRegKey $(H_UI) {"FlowCtrl",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" H_FlowCtrl
ifstr $(H_FlowCtrl) == $(KeyNull)
OpenRegKey $(H_UI) "" "FlowCtrl" $(MAXIMUM_ALLOWED) H_FlowCtrl
ifstr $(H_FlowCtrl) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(H_UI)
goto fatalregistry
endif
endif
set NewValueList = $(FlowCtrlParamList)
Shell $(UtilityInf), AddValueList, $(H_FlowCtrl), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
; for 3106S FlowCtrl Enum registry
CreateRegKey $(H_FlowCtrl) {"enum",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" H_Enum
ifstr $(H_Enum) == $(KeyNull)
OpenRegKey $(H_FlowCtrl) "" "enum" $(MAXIMUM_ALLOWED) H_Enum
ifstr $(H_Enum) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(H_FlowCtrl)
goto fatalregistry
endif
endif
set NewValueList = $(FlowCtrlEnumList)
Shell $(UtilityInf), AddValueList, $(H_Enum), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(H_Enum)
CloseRegKey $(H_FlowCtrl)
; for 3106S AdaptiveInt registry >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
CreateRegKey $(H_UI) {"AdaptiveInt",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" H_AdaptiveInt
ifstr $(H_AdaptiveInt) == $(KeyNull)
OpenRegKey $(H_UI) "" "AdaptiveInt" $(MAXIMUM_ALLOWED) H_AdaptiveInt
ifstr $(H_AdaptiveInt) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(H_UI)
goto fatalregistry
endif
endif
set NewValueList = $(AdaptiveIntParamList)
Shell $(UtilityInf), AddValueList, $(H_AdaptiveInt), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
; for 3106S AdaptiveInt Enum registry
CreateRegKey $(H_AdaptiveInt) {"enum",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" H_Enum
ifstr $(H_Enum) == $(KeyNull)
OpenRegKey $(H_AdaptiveInt) "" "enum" $(MAXIMUM_ALLOWED) H_Enum
ifstr $(H_Enum) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(H_AdaptiveInt)
goto fatalregistry
endif
endif
set NewValueList = $(DisableEnableEnumList)
Shell $(UtilityInf), AddValueList, $(H_Enum), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(H_Enum)
CloseRegKey $(H_AdaptiveInt)
; for 3106S 8021pqtag registry >>>>>>>>>>>>>>>>>>>>>>>>>>>
CreateRegKey $(H_UI) {"8021pqtag",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" H_8021pqtag
ifstr $(H_8021pqtag) == $(KeyNull)
OpenRegKey $(H_UI) "" "8021pqtag" $(MAXIMUM_ALLOWED) H_8021pqtag
ifstr $(H_8021pqtag) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(H_UI)
goto fatalregistry
endif
endif
set NewValueList = $(8021pqtagParamList)
Shell $(UtilityInf), AddValueList, $(H_8021pqtag), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
; for 3106S 8021pqtag Enum registry
CreateRegKey $(H_8021pqtag) {"enum",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" H_Enum
ifstr $(H_Enum) == $(KeyNull)
OpenRegKey $(H_8021pqtag) "" "enum" $(MAXIMUM_ALLOWED) H_Enum
ifstr $(H_Enum) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(H_8021pqtag)
goto fatalregistry
endif
endif
set NewValueList = $(DisableEnableEnumList)
Shell $(UtilityInf), AddValueList, $(H_Enum), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(H_Enum)
CloseRegKey $(H_8021pqtag)
; for 3106S VLANID registry >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
CreateRegKey $(H_UI) {"VLANID",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" H_VLANID
ifstr $(H_VLANID) == $(KeyNull)
OpenRegKey $(H_UI) "" "VLANID" $(MAXIMUM_ALLOWED) H_VLANID
ifstr $(H_VLANID) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(H_UI)
goto fatalregistry
endif
endif
set NewValueList = $(VLANIDParamList)
Shell $(UtilityInf), AddValueList, $(H_VLANID), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(H_VLANID)
CloseRegKey $(H_UI)
set NewValueList = $(VT3106SDefaultParamList)
set Sub = "VT3106S"
shell $(UtilityInf), AddValueList, $(H_AdapterService), $(NewValueList)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
Endif
; Update Description, Title, Manufacturer
SetRegValue $(H_Card) {Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)}
SetRegValue $(H_Card) {Title,$(NoTitle),$(!REG_VT_SZ),"["$(AdapterNum)"] "$(ProductHardware$(Option)$(Sub)Title)}
SetRegValue $(H_Card) {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)}
Else-Ifint $(AdapterCFID) == $(VT3106JCFID)
; Set 3106J TransmitBuffers value
set NewValueList = $(TransmitBuffersParamList)
Shell $(UtilityInf), AddValueList, $(H_TransmitBuffers), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(H_TransmitBuffers)
; Set 3106J ReceiveBuffers value
set NewValueList = $(ReceiveBuffersParamList)
Shell $(UtilityInf), AddValueList, $(H_ReceiveBuffers), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(H_ReceiveBuffers)
; for 3106J FlowCtrl registry >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
CreateRegKey $(H_UI) {"FlowCtrl",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" H_FlowCtrl
ifstr $(H_FlowCtrl) == $(KeyNull)
OpenRegKey $(H_UI) "" "FlowCtrl" $(MAXIMUM_ALLOWED) H_FlowCtrl
ifstr $(H_FlowCtrl) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(H_UI)
goto fatalregistry
endif
endif
set NewValueList = $(FlowCtrlParamList)
Shell $(UtilityInf), AddValueList, $(H_FlowCtrl), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
; for 3106J FlowCtrl Enum registry
CreateRegKey $(H_FlowCtrl) {"enum",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" H_Enum
ifstr $(H_Enum) == $(KeyNull)
OpenRegKey $(H_FlowCtrl) "" "enum" $(MAXIMUM_ALLOWED) H_Enum
ifstr $(H_Enum) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(H_FlowCtrl)
goto fatalregistry
endif
endif
set NewValueList = $(FlowCtrlEnumList)
Shell $(UtilityInf), AddValueList, $(H_Enum), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(H_Enum)
CloseRegKey $(H_FlowCtrl)
; for 3106J AdaptiveInt registry >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
CreateRegKey $(H_UI) {"AdaptiveInt",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" H_AdaptiveInt
ifstr $(H_AdaptiveInt) == $(KeyNull)
OpenRegKey $(H_UI) "" "AdaptiveInt" $(MAXIMUM_ALLOWED) H_AdaptiveInt
ifstr $(H_AdaptiveInt) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(H_UI)
goto fatalregistry
endif
endif
set NewValueList = $(AdaptiveIntParamList)
Shell $(UtilityInf), AddValueList, $(H_AdaptiveInt), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
; for 3106J AdaptiveInt Enum registry
CreateRegKey $(H_AdaptiveInt) {"enum",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" H_Enum
ifstr $(H_Enum) == $(KeyNull)
OpenRegKey $(H_AdaptiveInt) "" "enum" $(MAXIMUM_ALLOWED) H_Enum
ifstr $(H_Enum) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(H_AdaptiveInt)
goto fatalregistry
endif
endif
set NewValueList = $(DisableEnableEnumList)
Shell $(UtilityInf), AddValueList, $(H_Enum), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(H_Enum)
CloseRegKey $(H_AdaptiveInt)
CloseRegKey $(H_UI)
set NewValueList = $(VT3106JDefaultParamList)
set Sub = "VT3106J"
shell $(UtilityInf), AddValueList, $(H_AdapterService), $(NewValueList)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
Endif
; Update Description, Title, Manufacturer
SetRegValue $(H_Card) {Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)}
SetRegValue $(H_Card) {Title,$(NoTitle),$(!REG_VT_SZ),"["$(AdapterNum)"] "$(ProductHardware$(Option)$(Sub)Title)}
SetRegValue $(H_Card) {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)}
Else-Ifint $(AdapterCFID) == $(VT3065CFID)
; Set 3065 TransmitBuffers value
set NewValueList = $(TransmitBuffersParamList)
Shell $(UtilityInf), AddValueList, $(H_TransmitBuffers), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(H_TransmitBuffers)
; Set 3065 ReceiveBuffers value
set NewValueList = $(ReceiveBuffersParamList)
Shell $(UtilityInf), AddValueList, $(H_ReceiveBuffers), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(H_ReceiveBuffers)
; for 3065 FlowCtrl registry >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
CreateRegKey $(H_UI) {"FlowCtrl",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" H_FlowCtrl
ifstr $(H_FlowCtrl) == $(KeyNull)
OpenRegKey $(H_UI) "" "FlowCtrl" $(MAXIMUM_ALLOWED) H_FlowCtrl
ifstr $(H_FlowCtrl) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(H_UI)
goto fatalregistry
endif
endif
set NewValueList = $(FlowCtrlParamList)
Shell $(UtilityInf), AddValueList, $(H_FlowCtrl), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
; for 3065 FlowCtrl Enum registry
CreateRegKey $(H_FlowCtrl) {"enum",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" H_Enum
ifstr $(H_Enum) == $(KeyNull)
OpenRegKey $(H_FlowCtrl) "" "enum" $(MAXIMUM_ALLOWED) H_Enum
ifstr $(H_Enum) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(H_FlowCtrl)
goto fatalregistry
endif
endif
set NewValueList = $(FlowCtrlEnumList)
Shell $(UtilityInf), AddValueList, $(H_Enum), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(H_Enum)
CloseRegKey $(H_FlowCtrl)
; for 3065 AdaptiveInt registry >>>>>>>>>>>>>>>>>>>>>>>>>>>>>
CreateRegKey $(H_UI) {"AdaptiveInt",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" H_AdaptiveInt
ifstr $(H_AdaptiveInt) == $(KeyNull)
OpenRegKey $(H_UI) "" "AdaptiveInt" $(MAXIMUM_ALLOWED) H_AdaptiveInt
ifstr $(H_AdaptiveInt) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(H_UI)
goto fatalregistry
endif
endif
set NewValueList = $(AdaptiveIntParamList)
Shell $(UtilityInf), AddValueList, $(H_AdaptiveInt), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
; for 3065 AdaptiveInt Enum registry
CreateRegKey $(H_AdaptiveInt) {"enum",$(NoTitle),GenericClass} "" $(MAXIMUM_ALLOWED) "" H_Enum
ifstr $(H_Enum) == $(KeyNull)
OpenRegKey $(H_AdaptiveInt) "" "enum" $(MAXIMUM_ALLOWED) H_Enum
ifstr $(H_Enum) == $(KeyNull)
set RegistryErrorIndex = UNABLE_CREATE_SERVICE_SUBKEY
CloseRegKey $(H_AdaptiveInt)
goto fatalregistry
endif
endif
set NewValueList = $(DisableEnableEnumList)
Shell $(UtilityInf), AddValueList, $(H_Enum), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(H_Enum)
CloseRegKey $(H_AdaptiveInt)
CloseRegKey $(H_UI)
set NewValueList = $(VT3065DefaultParamList)
set Sub = "VT3065"
shell $(UtilityInf), AddValueList, $(H_AdapterService), $(NewValueList)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
Endif
; Update Description, Title, Manufacturer
SetRegValue $(H_Card) {Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)}
SetRegValue $(H_Card) {Title,$(NoTitle),$(!REG_VT_SZ),"["$(AdapterNum)"] "$(ProductHardware$(Option)$(Sub)Title)}
SetRegValue $(H_Card) {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)}
Else-Ifint $(AdapterCFID) == $(VT3043CFID)
; Set 3043 TransmitBuffers value
set NewValueList = $(VT3043TransmitBuffersParamList)
Shell $(UtilityInf), AddValueList, $(H_TransmitBuffers), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(H_TransmitBuffers)
; Set 3043 ReceiveBuffers value
set NewValueList = $(ReceiveBuffersParamList)
Shell $(UtilityInf), AddValueList, $(H_ReceiveBuffers), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
CloseRegKey $(H_ReceiveBuffers)
CloseRegKey $(H_UI)
set NewValueList = $(VT3043DefaultParamList)
set Sub = "VT3043"
shell $(UtilityInf), AddValueList, $(H_AdapterService), $(NewValueList)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
Endif
; Update Description, Title, Manufacturer
SetRegValue $(H_Card) {Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)}
SetRegValue $(H_Card) {Title,$(NoTitle),$(!REG_VT_SZ),"["$(AdapterNum)"] "$(ProductHardware$(Option)$(Sub)Title)}
SetRegValue $(H_Card) {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)}
Endif
CloseRegKey $(H_Card)
CloseRegKey $(H_AdapterService)
EndForListDo
CloseRegKey $(H_Netcards)
; ; initialize driver parameter list
; Ifstr(i) $(KeyProduct) == $(KeyNull)
; OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
; Ifstr $(KeyProduct) == $(KeyNull)
; Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
; Goto fatalregistry
; Endif
; Endif
; ; Get service key handle
; Shell $(UtilityInf) FindService, $(KeyProduct)
; Ifint $($ShellCode) != $(!SHELL_CODE_OK)
; Goto ShellCodeError
; Endif
; Ifstr(i) $($R0) != NO_ERROR
; Goto fatalregistry
; endif
; set KeyParameters = $($R2)
; CloseRegKey $($R1)
; Ifstr $(KeyParameters) == $(KeyNull)
; set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
; goto fatalregistry
; endif
; set OldVersionExisted = $(TRUE)
; set ValueName = ""
; set ValueData = ""
; set ValueList = {}
; EnumRegValue $(KeyParameters) ValueList
; ForListDo $(ValueList)
; set ValueItem = $($)
; set ValueName = *($(ValueItem),1)
; set ValueData = *($(ValueItem),4)
; ifstr(i) $(ValueName) == "AdapterCFID"
; set AdapterCFID = $(ValueData)
; endif
; EndForListDo
; Ifint $(AdapterCFID) == $(VT3106SCFID)
; set NewValueList = $(VT3106SDefaultParamList)
; set Sub = "VT3106S"
; Else-Ifint $(AdapterCFID) == $(VT3106JCFID)
; set NewValueList = $(VT3106JDefaultParamList)
; set Sub = "VT3106J"
; Else-Ifint $(AdapterCFID) == $(VT3065CFID)
; set NewValueList = $(VT3065DefaultParamList)
; set Sub = "VT3065"
; Else
; set NewValueList = $(VT3043DefaultParamList)
; set Sub = "VT3043"
; Endif
; shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
; Ifint $($ShellCode) != $(!SHELL_CODE_OK)
; goto ShellCodeError
; Endif
; ; Update Description, Software Title, Manufacturer Name
; Split-String $(!NTN_RegBase) "\" DestinationList
; set AdapterNum = *($(DestinationList), 11)
; OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyNetworkCards
; Ifstr $(KeyNetworkCards) == $(KeyNull)
; Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
; Goto fatalregistry
; Endif
; SetRegValue $(KeyNetworkCards) {Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)}
; SetRegValue $(KeyNetworkCards) {Title,$(NoTitle),$(!REG_VT_SZ),"["$(AdapterNum)"] "$(ProductHardware$(Option)$(Sub)Title)}
; SetRegValue $(KeyNetworkCards) {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardware$(Option)Description)}
; CloseRegKey $(KeyNetworkCards)
; Copy new software
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "ShellCode error"
goto ShellCodeError
endif
set !UG_Filename = $($R0)
install "Install-Update"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
goto fatal
endif
SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)}
SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)}
CloseRegKey $(KeyProduct)
Else
goto fatalregistry
Endif
goto end
;----------------------------------------------------------------------------
successful = +
goto end
;----------------------------------------------------------------------------
abandon = +
ForListDo $(OEM_ABANDON_OPTIONS)
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $($)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
EndForListDo
Ifstr(i) $(OEM_ABANDON_SOFTWARE) == TRUE
Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), FALSE
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
endif
goto end
;----------------------------------------------------------------------------
warning = +
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(to)
else-ifstr(i) $($R1) == "CANCEL"
goto $(from)
else
goto "end"
endif
;----------------------------------------------------------------------------
nonfatalinfo = +
Set CommonStatus = STATUS_USERCANCEL
Set Severity = STATUS
goto nonfatalmsg
;----------------------------------------------------------------------------
nonfatal = +
Set Severity = NONFATAL
goto nonfatalmsg
;----------------------------------------------------------------------------
nonfatalmsg = +
ifstr(i) $(Error) == ""
set Severity = NONFATAL
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
; if in unattended mode, do not show error message
ifstr $(!STF_GUI_UNATTENDED) != "YES"
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(from)
else
goto "end"
endif
else
goto "end"
endif
;----------------------------------------------------------------------------
fatalregistry = +
Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
;----------------------------------------------------------------------------
fatal = +
ifstr(i) $(Error) == ""
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
goto setfailed
;----------------------------------------------------------------------------
ShellCodeError = +
set DlgType = "MessageBox"
set STF_MB_TITLE = $(ShellCodeErrorTitle)
set STF_MB_TEXT = $(ShellCodeErrorText)
set STF_MB_TYPE = 1
set STF_MB_ICON = 3
set STF_MB_DEF = 1
ui start "Error Message"
goto setfailed
;----------------------------------------------------------------------------
setfailed = +
set CommonStatus = STATUS_FAILED
ifstr(i) $(OEM_ABANDON_ON) == TRUE
set OEM_ABANDON_ON = FALSE
goto abandon
endif
goto end
;----------------------------------------------------------------------------
end = +
Return $(CommonStatus)
;----------------------------------------------------------------------------
[Install-Option]
set STF_VITAL = ""
ifstr(i) $(AddCopy) == "YES"
AddSectionFilesToCopyList Files-PropUI $(SrcDir) $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-$(Option)-$(TargetOS) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
AddSectionFilesToCopyList Files-Help $(SrcDir) $(!STF_WINDOWSSYSPATH)
endif
ifstr(i) $(DoCopy) == "YES"
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
endif
Exit
;----------------------------------------------------------------------------
[Install-Hlp]
set STF_VITAL = ""
ifstr(i) $(AddCopy) == "YES"
AddSectionFilesToCopyList Files-Help $(SrcDir) $(!STF_WINDOWSSYSPATH)
endif
ifstr(i) $(DoCopy) == "YES"
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
endif
Exit
;-------------------------------------------------------------------------------
[Install-Update]
set STF_VITAL = ""
;set STF_OVERWRITE = "VERIFYSOURCEOLDER"
; HELP....
AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-$(Option)-$(TargetOS) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
AddSectionFilesToCopyList Files-PropUI $(SrcDir) $(!STF_WINDOWSSYSPATH)
AddSectionFilesToCopyList Files-Help $(SrcDir) $(!STF_WINDOWSSYSPATH)
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
exit
;-------------------------------------------------------------------------------
[Install-UTIL]
set STF_VITAL = ""
set STF_OVERWRITE = "ALWAYS"
AddSectionFilesToCopyList Files-PropUI $(SrcDir) $(!STF_WINDOWSSYSPATH)
CopyFilesInCopyList
ClearCopyList
exit
;-------------------------------------------------------------------------------
[Source Media Descriptions]
1 = "VIA Rhine Family Fast Ethernet Adapter Driver"
;-------------------------------------------------------------------------------
[ProductType]
STF_PRODUCT = Winnt
STF_PLATFORM = I386
STF_PLATFORM = Alpha
;============================================================================
[Files-Inf]
1, oemsetup.inf, SIZE=1000, RENAME=$(!UG_Filename)
[Files-FET-NT4]
1, fetnd4.sys , SIZE=999
[Files-FET-NT351]
1, fetnd3.sys , SIZE=999
[Files-PropUI]
1, ntutil.dll , SIZE=999
[Files-Help]
1, fetndh.hlp , SIZE=999
;============================================================================
[LanguagesSupported]
ENG
[OptionsTextENG]
FET = "VIA Rhine Family Fast Ethernet Adapter Driver"
[FileConstantsENG]
ProCaption = "Windows NT Setup"
ProCancel = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed. "+
"Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1 = "Copying:"
ProText2 = "To:"
ProductSoftwareDescription = "VIA Rhine Family Fast Ethernet Adapter Driver"
FunctionFETTitle = "VIA Rhine Family Fast Ethernet Adapter Setup"
ShellCodeErrorTitle = "Error: "$(Function$(Option)Title)
ShellCodeErrorText = "Shell Code Error."
CANNOT_FIND_ANY_CARD = "Network card is not present in the system"
[DialogConstantsENG]
Help = "&Help"
Exit = "Cancel"
OK = "OK"
HelpContext = ""
Continue = "Continue"
Cancel = "Cancel"
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.