NTSetup.inf Driver File Contents (via6103.zip)

[StfVariableDetect]
    !STF_PROCESSOR = "" ? $(!LIBHANDLE) GetProcessor
    !STF_PLATFORM  = "I386"        
    !STF_LANGUAGE   = "" ? $(!LIBHANDLE) GetLanguage
    LanguageList   = ^(LanguageID, 1)
    !STF_WINDOWSPATH    = "" ? $(!LIBHANDLE) GetWindowsNtDir
    !STF_WINDOWSSYSPATH = "" ? $(!LIBHANDLE) GetWindowsNtSysDir
    !STF_NTPATH         = $(!STF_WINDOWSPATH)
    !STF_COMPUTERNAME   = "" ? $(!LIBHANDLE) GetMyComputerName
    !STF_BUSTYPE        = "" ? $(!LIBHANDLE) GetMyBusType
    !STF_BUSTYPELIST    = "" ? $(!LIBHANDLE) GetMyBusTypeList
[StfVariableSyms]
    !ProcessorID_I386  = I386
    !ProcessorID_I486  = I486
    !ProcessorID_I586  = I586
    !ProcessorID_R4000 = R4000
    !ProcessorID_Alpha = Alpha_AXP
    !ProcessorID_PPC601  = PPC601
    !ProcessorID_PPC603  = PPC603
    !ProcessorID_PPC604  = PPC604
    !ProcessorID_PPC620  = PPC620
    !PlatformID_I386   = I386
    !PlatformID_Mips   = Mips
    !PlatformID_Alpha  = Alpha
    !PlatformID_PPC    = ppc
    !STF_PRODUCT        = WINNT    
    !STF_USERNAME       = ""       
    !STF_INSTALL_MODE   = "CUSTOM" 
    !STF_UPDGRADE       = NO       
    !STF_NCDETECT       = NO       
    !STF_NCOPTION       = ""       
    !STF_NCDETCARD      = 99999    
    !STF_NCDETINFO      = {}       
    !STF_NC_PARAMS      = {}       
    !STF_NC_PNAMES      = {}       
    !STF_SRCDIR_KEYED   = ""       
    !STF_SRCDIR_USED    = ""       
    !STF_SRCDIR_OVERRIDE = ""      
    !STF_SRCDIR_WINNT   = ""       
    !STF_TEMPLATE_CRITERR = "CRITERR2"
    !STF_TEMPLATE_NONCRITERR = "NONCRITERR2"
    !STF_INSTALLED_OS = {} ? $(!LIBHANDLE) GetInstalledOSNames
    FatalErrorIndex = 1
    Exit_Code = 0


[DoAskOemsetupSource]
    read-syms DoAskUpgradeSrcDlgText$(!STF_LANGUAGE)
    shell "subroutn.inf" DoAskSourceEx $($0) $(DlgText)
    Return $($R0) $($R1) $($R2) $($R3)
[Shell Commands]
     set-title "Windows NT Setup"
     Set !G:DebugOutputControl = 0
     LoadLibrary "x" $(!STF_CWDDIR)setupdll.dll !LIBHANDLE
     Set !NCPA_HANDLE = ""
     Ifstr(i) $(!NTN_InfSection) != OemSoftwareInstall
	 Debug-Output "NCPASHEL.INF: LoadLibrary on "$(!STF_CWDDIR)ncpa.cpl
	 LoadLibrary "y" $(!STF_CWDDIR)ncpa.cpl !NCPA_HANDLE
     Endif
     Shell "subroutn.inf" ReadSetupHelpIds
     SetHelpFile "NetCfg.hlp" $(!MinimumID) $(!MaximumID)
     set-subst LF = "\n"
     StartWait
     read-syms StfVariableSyms
     read-syms StfVariableDetect
     detect StfVariableDetect
     Set !STF_NTPATH = $(!STF_WINDOWSSYSPATH)
     OpenRegKey $(!REG_H_LOCAL) "" "System\CurrentControlSet\Control\ProductOptions" 33554432 KeyProductOption
     ifstr(i) $(KeyProductOption) != ""
	 GetRegValue $(KeyProductOption) "ProductType" ProductTypeList
	 set TempProductType = *($(ProductTypeList),4)
	 ifstr(i) $(TempProductType) == "winnt"
	     set !STF_PRODUCT = WINNT
	 else-ifstr(i) $(TempProductType) == "lanmannt"
	     set !STF_PRODUCT = LANMANNT
	 else-ifstr(i) $(TempProductType) == "servernt"
	     set !STF_PRODUCT = SERVERNT
	 endif
	 CloseRegKey $(KeyProductOptions)
     endif
     Debug-Output "NCPASHEL.INF: STF_SRCDIR is "$(!STF_SRCDIR)
     Debug-Output "NCPASHEL.INF: NTN_SRCPATH is "$(!NTN_SRCPATH)
     ;Ifstr(i) $(!NTN_SRCPATH) != ""
     ;    Set !STF_ORIGINAL_SRCDIR = $(!STF_SRCDIR)
     ;    Set !STF_SRCDIR = $(!NTN_SRCPATH)
     ;    Debug-Output "NCPASHEL.INF: Reset STF_SRCDIR to:"$(!STF_SRCDIR)
     ;else
	 OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows Nt\CurrentVersion" $(!REG_KEY_READ) KeyNt
	 Ifstr(i) $(KeyNt) != ""
	     GetRegValue $(KeyNt) "SourcePath" SourcePathValue
	     Set !STF_SRCDIR = *($(SourcePathValue),4)
	     Debug-Output "NCPASHEL.INF: SourcePath retrieved is "$(!STF_SRCDIR)
	     CloseRegKey $(KeyNt)
	 Endif
	 Ifstr(i) $(!STF_SRCDIR) == ""
	   Set !STF_SRCDIR = "A:\"
	 Endif
     ;Endif
     Set SetupInp = 0
     Set !NTN_InstallPhase = secondary
     ifstr(i) $(!NTN_OVERIDEPHASE) != ""
	 Set !NTN_InstallPhase = $(!NTN_OVERIDEPHASE)
     Else
	 OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\Setup" $(!REG_KEY_READ) KeySetup
	 Ifstr(i) $(KeySetup) != ""
	     GetRegValue $(KeySetup) "SystemSetupInProgress" SetupInpValue
	     Ifint $(RegLastError) == $(!REG_ERROR_SUCCESS)
		 Set SetupInp = *($(SetupInpValue),4)
		 Debug-Output "NCPASHEL.INF: SetupInp = "$(SetupInp)
	     Endif
	     Ifint $(SetupInp) == 1
		 Set !NTN_InstallPhase = primary
		 GetRegValue $(KeySetup) "WinntPath" SetupPathValue
		 Ifint $(RegLastError) == $(!REG_ERROR_SUCCESS)
		     Set !STF_SRCDIR_WINNT = *($(SetupPathValue),4)
		     Debug-Output "NCPASHEL.INF: STF_SRCDIR_WINNT = "$(!STF_SRCDIR_WINNT)
		 Endif
	     Endif
	     CloseRegKey $(KeySetup)
	 Endif
     EndIf
     Debug-Output "NCPASHEL.INF: NTN_InstallPhase = "$(!NTN_InstallPhase)
     Debug-Output "NCPASHEL.INF: NTN_InfSection = "$(!NTN_InfSection)
     Debug-Output "NCPASHEL.INF: NTN_InstallMode = "$(!NTN_InstallMode)
   ;Ifstr(i) $(!NTN_Origination) == "install"
   ;     Goto skipdetection
   ;Endif
   Ifstr(i) $(!NTN_InfSection) == BindingsReview
	Goto skipdetection
   Endif
   Ifstr(i) $(!NTN_InstallMode) == install
	Goto startdetection
   Endif
   Ifstr(i) $(!NTN_InstallMode) == configure
	Goto startdetection
   Endif
   Goto skipdetection
startdetection = +
   Ifstr(i) $(!NCPA_HANDLE) != ""
       Debug-Output "NCPASHEL.INF: Enable netcard detection from NCPA.CPL"
       Shell "NCPARAM.INF" Param_ControlDetection DTSTART
   Endif
skipdetection = +
     ifstr(i) $(!STF_PROCESSOR) == $(!ProcessorID_I386)
	 set !STF_PLATFORM = $(!PlatformID_I386)
	 set !SYS      = $(!ProcessorID_I386)
     else-ifstr(i) $(!STF_PROCESSOR) == $(!ProcessorID_I486)
	 set !STF_PLATFORM = $(!PlatformID_I386)
	 set !SYS      = $(!ProcessorID_I386)
     else-ifstr(i) $(!STF_PROCESSOR) == $(!ProcessorID_I586)
	 set !STF_PLATFORM = $(!PlatformID_I386)
	 set !SYS      = $(!ProcessorID_I386)
     else-ifstr(i) $(!STF_PROCESSOR) == $(!ProcessorID_R4000)
	 set !STF_PLATFORM = $(!PlatformID_Mips)
	 set !SYS      = $(!ProcessorID_R4000)
     else-ifstr(i) $(!STF_PROCESSOR) == $(!ProcessorID_Alpha)
	 set !STF_PLATFORM = $(!PlatformID_Alpha)
	 set !SYS      = $(!ProcessorID_Alpha)
     else-ifstr(i) $(!STF_PROCESSOR) == $(!ProcessorID_PPC601)
	 set !STF_PLATFORM = $(!PlatformID_PPC)
	 set !SYS      = $(!ProcessorID_PPC601)
     else-ifstr(i) $(!STF_PROCESSOR) == $(!ProcessorID_PPC603)
	 set !STF_PLATFORM = $(!PlatformID_PPC)
	 set !SYS      = $(!ProcessorID_PPC603)
     else-ifstr(i) $(!STF_PROCESSOR) == $(!ProcessorID_PPC604)
	 set !STF_PLATFORM = $(!PlatformID_PPC)
	 set !SYS      = $(!ProcessorID_PPC604)
     else-ifstr(i) $(!STF_PROCESSOR) == $(!ProcessorID_PPC620)
	 set !STF_PLATFORM = $(!PlatformID_PPC)
	 set !SYS      = $(!ProcessorID_PPC620)
     else
	 set !STF_PLATFORM = $(!PlatformID_I386)
	 set !SYS      = $(!ProcessorID_I386)
     endif
     Ifstr(i) $(!STF_LANGUAGE) != "ENG"    
	 Debug-Output "NCPASHEL: Language not set to English; resetting"
	 !STF_LANGUAGE = "ENG"
     Endif
     read-syms ProgressCopy$(!STF_LANGUAGE)
    Ifstr(i) $(!NTN_RegBase) == ""
	set !NTN_RegBase = ""
    Endif
    set !NTN_ServiceBase  = "SYSTEM\CurrentControlSet\SERVICES"
    Ifstr(i) $(!NTN_InstallMode) == ""
	Debug-Output "NCPASHEL:!NTN_InstallMode was not defined!"
	set !NTN_InstallMode  = "configure"
    Endif
    Ifstr(i) $(!NTN_SoftwareBase) == ""
	set !NTN_SoftwareBase = "SOFTWARE"
    Endif
    Ifstr(i) $(!NTN_Origination) == ""
	set !NTN_Origination = "ncpa"
    Endif
    Ifstr(i) $(!NTN_Infname) == ""
	goto fatalnoinfname
    Endif
    Ifstr(i) $(!NTN_InfSection) == ""
	Set !NTN_InfSection = "InstallOption"
    Endif
    ifstr(i) $(!NTN_InstallMode) == "Update"
	;Debug-Output "NCPASHEL.INF: Upgrade mode"
	;Shell "" DoAskOemsetupSource $(!STF_SRCDIR)
	;Ifstr(i) $($ShellCode) != $(!SHELL_CODE_OK)
	;    goto shellerror
	;Endif
	;ifstr(i) $($R0) == STATUS_SUCCESSFUL
	;    set !STF_SRCDIR = $($R1)
	;else-ifstr(i) $($R0) == STATUS_USERCANCEL
	;    set Exit_Code = 1
	;    goto end
	;else
	;    set Exit_Code = 2
	;    goto end
	;endif
	Set !NTN_Infname = $(!STF_SRCDIR)\oemsetup.inf
    endif
    Ifstr(i) $(!NTN_InstallMode) == install
	set AddCopy  = YES
	set DoCopy   = YES
	set DoConfig = YES
    Else-ifstr(i) $(!NTN_InstallMode) == "Update"
	set AddCopy  = YES
	set DoCopy   = YES
	set DoConfig = NO
	Debug-Output "NCPASHEL.INF: Shell to "$(!NTN_Infname)
	Shell $(!NTN_Infname) ReturnOptions $(!STF_LANGUAGE)
	Ifstr(i) $($ShellCode) != $(!SHELL_CODE_OK)
	   Debug-Output "NCPASHEL.INF: SHELL ERROR: "$($ShellCode)
	   goto shellerror
	Endif
	Ifstr(i) $($R0) == "STATUS_SUCCESSFUL"
	   IfContains(i) $(!NTN_InfOption) in $($R1)
	      goto ContinueUpgrade
	   endif
	endif
	read-syms IncorrectOemsetupDisk$(!STF_LANGUAGE)
	shell "subroutn.inf" SetupMessage $(!STF_LANGUAGE) "NONFATAL" $(ErrorText)
	set Exit_Code = 1
	goto end
ContinueUpgrade = +
    Endif
    ifstr(i) $(!NTN_SRCPATH) != ""
	Set !STF_SRCDIR_OVERRIDE = $(!STF_SRCDIR)
    Endif
;    
    OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Tcpip\CurrentVersion" $(!REG_KEY_READ) KeyProduct
    ifstr(i) $(KeyProduct) == ""
	Shell "oemnxptc.inf" $(!NTN_InfSection) +
		$(!STF_LANGUAGE) TC +
		$(!STF_SRCDIR) $(AddCopy) $(DoCopy) $(DoConfig) 
    endif
    CloseRegKey $(KeyProduct)
;    
    OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\LanmanServer\CurrentVersion" $(!REG_KEY_READ) KeyProduct
    ifstr(i) $(KeyProduct) == ""
	Shell "oemnsvsv.inf" $(!NTN_InfSection) +
		$(!STF_LANGUAGE) SRV +
		$(!STF_SRCDIR) $(AddCopy) $(DoCopy) $(DoConfig)    
	
    endif
    CloseRegKey $(KeyProduct)

;    
    OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\LanmanWorkstation\CurrentVersion" $(!REG_KEY_READ) KeyProduct
    ifstr(i) $(KeyProduct) == ""
	Shell "oemnsvwk.inf" $(!NTN_InfSection) +
		$(!STF_LANGUAGE) WKSTA +
		$(!STF_SRCDIR) $(AddCopy) $(DoCopy) $(DoConfig) 

	OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\NetLogon" $(!REG_KEY_WRITE) KeyStart
	SetRegValue $(KeyStart) {"Start", 0, $(!REG_VT_DWORD),3}
	CloseRegKey $(KeyStart)

    endif
    CloseRegKey $(KeyProduct)

;    
    OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\NetBios\CurrentVersion" $(!REG_KEY_READ) KeyProduct
    ifstr(i) $(KeyProduct) == ""
	Shell "oemnsvnb.inf" $(!NTN_InfSection) +
		$(!STF_LANGUAGE) NETBIOS +
		$(!STF_SRCDIR) $(AddCopy) $(DoCopy) $(DoConfig)    
	
    endif
    CloseRegKey $(KeyProduct)

;    
    OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\RPCLOCATOR\CurrentVersion" $(!REG_KEY_READ) KeyProduct
    ifstr(i) $(KeyProduct) == ""
	Shell "oemnsvrp.inf" $(!NTN_InfSection) +
		$(!STF_LANGUAGE) RPCLOCATE +
		$(!STF_SRCDIR) $(AddCopy) $(DoCopy) $(DoConfig)    
	
    endif
    CloseRegKey $(KeyProduct)

    Set !STF_SRCDIR_OVERRIDE = $(!NTN_SRCPATH)
    Set !STF_SRCDIR = $(!NTN_SRCPATH)

    Shell $(!NTN_Infname) $(!NTN_InfSection) +
	 $(!STF_LANGUAGE) $(!NTN_InfOption) +
	 $(!STF_SRCDIR) $(AddCopy) $(DoCopy) $(DoConfig)    
    Ifstr(i) $($ShellCode) != $(!SHELL_CODE_OK)
       Debug-Output "NCPASHEL.INF: SHELL ERROR: "$($ShellCode)
       goto shellerror
    Endif
    Debug-Output "NCPASHEL: INF return: "$($R0)
    
    Ifstr(i) $($R0) == STATUS_SUCCESSFUL
	set Exit_Code = 0
	ifstr(i) $(!NTN_InstallMode) == install            
	    OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\Tcpip\Parameters" $(!REG_KEY_WRITE) ParametersKey
	    SetRegValue $(ParametersKey) {"EnableDHCP", 0, $(!REG_VT_DWORD),1}
	    CloseRegKey $(ParametersKey)
	    Shell "", INSTALL-INF
	Endif
	LibraryProcedure StartResult $(!NCPA_HANDLE), CPlSetup $(!STF_HWND), NCPA
	
    else-ifstr(i) $($R0) == STATUS_USERCANCEL
	set Exit_Code = 1
    else-ifstr(i) $($R0) == STATUS_NO_EFFECT
	set Exit_Code = 3
    else-ifstr(i) $($R0) == STATUS_REBIND
	set Exit_Code = 4
    else-ifstr(i) $($R0) == STATUS_REBOOT
	set Exit_Code = 5
    else
	set Exit_Code = 2
    Endif
    EndWait    
    goto end
shellerror = +
   read-syms ShellError$(!$ShellCode)$(!STF_LANGUAGE)
   Debug-Output "NCPASHEL: SHELL ERROR: "$(Error)
   goto fatal
fatalnoinfname = +
   set FatalErrorIndex = 2
   goto fatalmsg
fatalmsg = +
   read-syms FatalError$(FatalErrorIndex)$(!STF_LANGUAGE)
   Debug-Output "NCPASHEL: FATAL ERROR: "$(Error)
   goto fatal
fatal = +
   read-syms FatalDlg$(!STF_LANGUAGE)
   ui start "FatalError"
   goto end
end = +
   Ifstr(i) $(!LIBHANDLE) != ""
       LibraryProcedure DontCare, $(!LIBHANDLE), DeleteAllConnections
   Endif
   Debug-Output "NCPASHEL: NCPASHEL: returning to NCPA"
   goto term
term = +
   Debug-Output "NCPASHEL: Bye."
   exit   
   
[Install-INF]        
    Set Prefix = "oemnad"
    Set Index = 0    
NextFile = +    
    LibraryProcedure STATUS,$(!LIBHANDLE),CheckFileExistance $(!STF_WINDOWSSYSPATH)\$(Prefix)$(Index).inf
    Ifstr(i) $(STATUS) == "YES"
	Set-add Index = $(Index),1
	goto    NextFile
    Endif
    
    Set InfName = $(Prefix)$(Index).inf

    OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\NCPA" $(!REG_KEY_WRITE) KeyNt
    SetRegValue $(KeyNt), {InfReturn, 0, $(!REG_VT_SZ), $(InfName)","$(!STF_SRCDIR)","$(!NTN_InfOption)",Ethernet Adapter Information"}
    CloseRegKey $(KeyNt)
	
    Set Index = 1    
NextCard = +
    Ifint $(Index) < 10
    	OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$(Index) $(!REG_KEY_READ) KeyNt
    	Ifstr(i) $(KeyNt) != $(KeyNull)                        
            GetRegValue $(KeyNt) "ProductName" ProductName
            GetRegValue $(KeyNt) "ServiceName" ServiceName
            GetRegValue $(KeyNt) "Manufacturer" Manufacturer
    	    CloseRegKey $(KeyNt)
            Debug-Output "NCPASHEL: ProductName is : "$(ProductName)
            Debug-Output "NCPASHEL: ServiceName is : "$(ServiceName)

            OpenRegKey $(!REG_H_LOCAL) "" "SYSTEM\CurrentControlSet\Services\"*($(ServiceName),4)"\Parameters" $(!REG_KEY_READ) KeyNtParameters
    		Ifstr(i) $(KeyNtParameters) != $(KeyNull)                        
                GetRegValue $(KeyNtParameters) "AdapterCFID" AdapterCFID
                Debug-Output "NCPASHEL: AdapterCFID is : "*($(AdapterCFID),4)
                Set-mul nResult1 = 4358, 65536  ;4358=0x1106
                Debug-Output "NCPASHEL: Set-mul nResult is : "$(nResult1)
                Set-div nResult2 = *($(AdapterCFID),4), 65536
                Debug-Output "NCPASHEL: Set-div nResult is : "$(nResult2)
                Set-sub nResult = nResult2, nResult1
                Debug-Output "NCPASHEL: Set-sub nResult is : "$(nResult)
                CloseRegKey $(KeyNtParameters)
                ifint $(nResult) == 0
                    OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$(Index)"\NetRules" $(!REG_KEY_READ) KeyNetRules
                    Ifstr(i) $(KeyNetRules) != $(KeyNull)
                        GetRegValue $(KeyNetRules) "InfOption" InfOption
                        Debug-Output "NCPASHEL: InfOption is : "*($(InfOption),4)
                        CloseRegKey $(KeyNetRules)
                    Endif
                    Ifstr(i) *($(InfOption),4) == $(!NTN_InfOption)
    	                Debug-Output "NCPASHEL: NetworkCards Index is : "$(Index)
                        Debug-Output "NCPASHEL: NetRules InfName is : "$(InfName)
    
                        OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$(Index)"\NetRules" $(!REG_KEY_WRITE) KeyNetRules
                        Ifstr(i) $(KeyNetRules) != $(KeyNull)
                            SetRegValue $(KeyNetRules) , {InfName , 0,$(!REG_VT_SZ), $(InfName)}
                            CloseRegKey $(KeyNetRules)
                        Endif

                        OpenRegKey $(!REG_H_LOCAL) "" "SOFTWARE\"*($(Manufacturer),4)"\"*($(ProductName),4)"\CurrentVersion\NetRules" $(!REG_KEY_WRITE) KeyNetRules
                        Ifstr(i) $(KeyNetRules) != $(KeyNull)
                            SetRegValue $(KeyNetRules), {Infname, 0, $(!REG_VT_SZ), $(InfName)}    
                            CloseRegKey $(KeyNetRules)
                        Endif

                    Endif
                Endif
            Endif        
        Endif        

	Set-add Index = $(Index), 1 
	goto NextCard
    Endif    
    
    LibraryProcedure STATUS,$(!NCPA_HANDLE), CopySingleFile $(!STF_HWND) $(!STF_SRCDIR)\oemsetup.inf $(!STF_WINDOWSSYSPATH)\$(InfName)
    Return 0
[Source Media Descriptions]
    1 = "Windows NT Workstation CD-ROM" , TAGFILE = cdrom_w.40
[Signature]
    FileType = MICROSOFT_FILE
[GetSignature]
    read-syms Signature
    return $(FileType)
[ProductType]
STF_PRODUCT  = Winnt
STF_PLATFORM = I386
[Files-Inf]
2,      oemsetup.inf,    SIZE=1000,     RENAME=$(!UG_Filename)
[LanguageID]
   ENG
[LanguageTextENG]
   "English (United States)"
[ProgressCopyENG]
    ProCaption   = "Windows NT Networking Setup"
    ProCancel    = "Cancel"
    ProCancelMsg = "Windows NT is not correctly installed.  Are you sure you want "+
		   "to cancel copying files?"
    ProCancelCap = "Setup Message"
    ProText1     = "Copying:"
    ProText2     = "To:"
    PlatformID_I386 = I386
    PlatformID_Mips = Mips
    PlatformID_PPC  = ppc
[FatalDlgENG]
STF_MB_TITLE = "Setup Message"
DlgType = "MessageBox"
STF_MB_TEXT  = $(Error)
STF_MB_TYPE  = 1
STF_MB_ICON  = 3
STF_MB_DEF   = 1
[FatalError1ENG]
Error = "Initialization failed"
[FatalError2ENG]
Error = "No INF file name given (NTN_Infname)"
[FatalError3ENG]
Error = "Invocation of INF file "$(!NTN_Infname)" failed"
[ShellError1ENG]
Error = "INF file "$(!NTN_Infname)" does not exist"
[ShellError2ENG]
Error = "INF file "$(!NTN_Infname)" does not have a section named "$(!NTN_InfSection)
[ShellError3ENG]
Error = "INF file "$(!NTN_Infname)", section "$(!NTN_InfSection)" has syntax errors"
[DoAskUpgradeSrcDlgTextENG]
    DlgText        = "Please enter the full path for the upgrade/update "+
		     "OEMSETUP.INF file. Then choose Continue."
[IncorrectOemsetupDiskENG]
    ErrorText      = "Update aborted. The OEMSETUP.INF does not support upgrade for the specified component."
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 0.75