** ** ** VIA Rhine Family Fast Ethernet Adapter ** ** Ethernet Downloader/Debugger package for Windows CE 4.2 ** ** v1.02 Jun, 2004 ** ** Introduction: ============= This document shows you how to enables VIA Rhine Family Fast Ethernet Adapter to be adopted as a download/debug card for WINCE .NET platform builder 4.2. Contents of the Subdirectory: ============================= \DEBUG\FETDBG.LIB fetdbg library debug version \DEBUG\FETDBG.PDB fetdbg library debug pdb file \RETAIL\FETDBG.LIB fetdbg library retail version \RETAIL\FETDBG.PDB fetdbg library retail pdb file MAKEFILE sample MAKEFILE file SOURCES sample SOURCES file HALETHER.H HAL Header File HALETHER.C HALETHER Source Code EBOOT.BIN ethernet boot loader file LOADCEPC.EXE Windows CE .NET boot loader FETDBG.TXT this file Installation: ============= Assume your target platform is equipped with VIA Rhine Family Fast Ethernet Adapter, the platform is "CEPC:X86". Installation and test instructions are described below. 1. Copy binary library files (1) Retail build: Copy the following files to directory \WINCE420\public\common\oak\LIB\X86\RETAIL \Retail\fetdbg.lib \Retail\fetdbg.pdb (2) Debug build: Copy the following files to directory \WINCE420\public\common\oak\LIB\X86\DEBUG \Debug\fetdbg.lib \Debug\fetdbg.pdb 2. Modify HALETHER.C Locate the HALETHER.C file in directory \WINCE420\PLATFORM\CEPC\KERNEL\HAL and add the following codes in the "switch (pBootArgs->ucEdbgAdapterType)" statement in the OEMEthInit() function: case EDBG_ADAPTER_FET: pfnEDbgInit = FETInit; pfnEDbgInitDMA = FETInitDMABuffer; pfnEDbgEnableInts = FETEnableInts; pfnEDbgDisableInts = FETDisableInts; pfnEDbgGetPendingInts = FETGetPendingInts; pfnEDbgGetFrame = FETGetFrame; pfnEDbgSendFrame = FETSendFrame; pfnEDbgReadEEPROM = FETReadEEPROM; pfnEDbgWriteEEPROM = FETWriteEEPROM; pfnEDbgSetOptions = FETSetOptions; pfnCurrentPacketFilter= FETCurrentPacketFilter; pfnMulticastList = FETMulticastList; break; Sample HALETHER.C file is included for your reference. 3. Modify halether.h Locate the halether.h file in directory \WINCE420\public\common\oak\INC and add the following lines: #define EDBG_ADAPTER_FET 65 // Prototypes for FETDBG.LIB functions BOOL FETInitDMABuffer(DWORD dwStartAddress, DWORD dwSize); BOOL FETInit( BYTE *pbBaseAddress, DWORD dwMultiplier, USHORT MacAddr[3]); void FETEnableInts(void); void FETDisableInts(void); DWORD FETGetPendingInts(void); UINT16 FETGetFrame( BYTE *pbData, UINT16 *pwLength ); UINT16 FETSendFrame( BYTE *pbData, DWORD dwLength ); BOOL FETReadEEPROM( UINT16 EEPROMAddress, UINT16 *pwVal); BOOL FETWriteEEPROM( UINT16 EEPROMAddress, UINT16 Data ); DWORD FETSetOptions(DWORD dwOptions); void FETCurrentPacketFilter(DWORD dwFilter); BOOL FETMulticastList(PUCHAR pucMulticastAddresses, DWORD dwNoOfAddresses); Also add the following lines into the SUPPORTED_COMMON_NIC #define section: {0x1106, 0x3065, 0xABCDEF, EDBG_ADAPTER_FET, "VT" }, /* VIA */\ {0x1106, 0x3106, 0xABCDEF, EDBG_ADAPTER_FET, "VT" }, /* VIA */\ {0x1106, 0x3053, 0xABCDEF, EDBG_ADAPTER_FET, "VT" }, /* VIA */\ Sample halether.h file is included for your reference. 4. Modify the "Sources" files Locate respectively the "Sources" files in directories \WINCE420\PLATFORM\CEPC\KERNEL\BUILDEXE\KERNKITL \WINCE420\PLATFORM\CEPC\KERNEL\BUILDEXE\KERNKITLPROF and add one extra line below for the TARGETLIBS environment variable: $(_COMMONOAKROOT)\lib\$(_CPUDEPPATH)\fetdbg.lib \ Sample "Sources" file is included for your reference. 5. Modify MAKEFILE file Locate the MAKEFILE file in directory \WINCE420\public\common\CESYSGEN and add "fetdbg" for the tools and httpftp segments. Sample "MAKEFILE" file is included for your reference. 6. Build CEPC platform Choose "Build Platform" from the "Build" menu to make a new OS image. 7. Basic testing A file named EBOOT.BIN is included in this package. Copy this file to your boot disk. If you need to specify IRQ or IOPORT for ethernet debug card, a setup utility is included in this package. Run this setup utility on your target platform to check the IRQ and IOPORT assignments of the card. Then run loadcepc.exe to download the OS image. Usage, loadcepc /e:<IOPORT in HEX>:<IRQ in hex>:[<dotted IP address, optional>] eboot.bin Where <IOPORT> and <IRQ> could be found by the setup utility. Typical examples, In case of static IP assignment, loadcepc /e:E000:B:192.168.1.123 eboot.bin In case of IP assignment through DHCP, loadcepc /e:E000:B eboot.bin 8. IDE platform builder ethernet download/debug settings In order to configure a connection for downloading and debugging, choose "Configure Remote Connection" from the Target menu to select the device name to be used for image downloading and debugging. 9. FET NDIS LAN driver/EDBG conflict problem If a FET is used as a download/debug card, then FET Fast Ethernet LAN Driver driver must not be installed on this download/debug card. Improper installation could cause Windows CE system hanging. By default, a VMini Ethernet sharing library is supported by CE.Net. It's a miniport driver that interfaces with VBridge to handle traffic not related to Ethernet debugging. Besides EDBG, a FET download/debug card also functions as a product Ethernet card. Note:If the environment variable BSP_NOSHAREETH is set, VMini will be disabled.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.