pst_flash.ini Driver File Contents (E815Drivers.zip)

; Copyright 2000-2004 Motorola Inc.
; Last updated: November 01, 2004

; General section
; Parameter/s that refer to the general behavior of flash component
[General]
SyncJump=1

; Chipset section
; 1. Add entry for new chipset in the [chipset] section.
;    The only valid format is hex.
[Chipset]
WALLY_CHIPSET       =     0x00
PATRIOT_CHIPSET     =     0x01
NEPTUNE_LT_CHIPSET  =     0x02
RAINBOW_CHIPSET     =     0x03
MSM5105_CHIPSET     =     0x04
MSM5100_CHIPSET     =     0x05
OMAP_CHIPSET        =     0x06
SIRF_CHIPSET        =     0x07
POG_CHIPSET         =     0x08
NEPTUNE_LTS_CHIPSET =     0x09
NEPTUNE_ULS_CHIPSET =     0x0A
NEPTUNE_LTX_CHIPSET =     0x0B
NEPTUNE_LTE_CHIPSET =     0x0C
DALHART_CHIPSET     =     0x0D
MSM6050_CHIPSET	    =     0x0E
MSM6100_CHIPSET	    =     0x0F
MSM6300_CHIPSET	    =     0x10
OMAP_POG_CHIPSET    =     0x11
NEPTUNE_VLT_CHIPSET =     0x12
NEPTUNE_LTE2_CHIPSET=     0x13
ARGON_CHIPSET       =     0x14
SCMA11_CHIPSET      =     0x15
BULVERDE_CHIPSET    =     0x16
MSM6500_CHIPSET	    =     0x17
MSM6025_CHIPSET	    =     0x18



; MA sections.
; 2. Add entry for new MA type in the [MA] section.
;    Each key in this section has its corresponding section
;    that will hold information specific that particular MA
;    type. The only valid format is hex.
[MA]
CDMA_TYPE       = 0x01
GSM_TYPE        = 0x02
TDMA_TYPE       = 0x03
UMTS_TYPE	= 0x04
CDMA1X_TYPE     = 0x05

[CDMA_TYPE]
ChipSetSection=CDMAChipset

[GSM_TYPE]
ChipSetSection=GSMChipset

[TDMA_TYPE]
ChipSetSection=TDMAChipset

[UMTS_TYPE]
ChipsetSection=UMTSChipset

[CDMA1X_TYPE]
ChipSetSection = CDMA1xChipset

[UMTS_TYPE]
ChipsetSection=UMTSChipset



; MA specfic Chipset sections.
; For each MA type, there is a chipset section containing
; numerous chipsets.
; 3. Add chipset key in one of the following chipset sections for
;    new chipset, per its MA type.

[CDMAChipset]
WALLY_CHIPSET = CDMA Wally,16

[GSMChipset]
PATRIOT_CHIPSET     = GSM Patriot,16 
NEPTUNE_LT_CHIPSET  = GSM Neptune LT,16
NEPTUNE_LTS_CHIPSET = GSM Neptune LTS,16

NEPTUNE_ULS_CHIPSET = GSM Neptune ULS,16
NEPTUNE_LTE_CHIPSET = GSM Neptune LTE,16
NEPTUNE_VLT_CHIPSET = GSM Neptune VLT,16
NEPTUNE_LTE2_CHIPSET= GSM Neptune LTE2,16
DALHART_CHIPSET     = GSM Dalhart,0
SCMA11_CHIPSET      = GSM SCM-A11,40
BULVERDE_CHIPSET    = GSM Bulverde,0

[TDMAChipset]
PATRIOT_CHIPSET = TDMA Partriot,16

[CDMA1xChipset]
MSM5105_CHIPSET = CDMA1x MSM5105,0
MSM5100_CHIPSET = CDMA1x MSM5100,0
MSM6050_CHIPSET = CDMA1x MSM6050,0
MSM6100_CHIPSET = CDMA1x MSM6100,0
MSM6300_CHIPSET = CDMA1x MSM6300,0
MSM6500_CHIPSET = CDMA1x MSM6500,0
MSM6025_CHIPSET = CDMA1x MSM6025,0

[UMTSChipset]
OMAP_CHIPSET 	    = UMTS OMAP,0
RAINBOW_CHIPSET     = UMTS 3G Rainbow,16
POG_CHIPSET         = UMTS POG Rainbow,16
OMAP_POG_CHIPSET    = UMTS OMAP POG,0
ARGON_CHIPSET       = UMTS ARGON,40



; Flash Parameters section
; The format of keys and values in [flash parameters] section.
; USB Device String Descriptor	= Number of Interfaces, Security Model,Flash Control Flags, Platform string
; Blank P2K Wally 		= 1,0,3, Blank CDMA Wally
; Details on Flash Control Flags is described in Microsoft Excel Spread Sheet FlashParametersWorkSheet.xls.

[Flash Parameters]
Blank CDMA1X MSM5105 = 1,0,1,Blank CDMA1X MSM5105,0
Blank P2K Patriot = 1,0,1,Blank Patriot,0
Blank P2K Rainbow = 1,0,1,Blank Rainbow,0
Blank LCA Neptune = 1,0,1,Blank Neptune LT,0
Blank ULS Neptune = 1,1,17,Blank Neptune ULS,0
Blank A920 Paragon = 3,0,12,Blank A920,0

Flash P2K Wally = 1,0,2,CDMA Wally,16
Flash P2K Patriot = 1,0,2,P2K Patriot,16
Motorola V. NE01 = 1,0,0,Motorola V. NE01,0
Motorola V.120x = 1,0,0,Motorola V.120x,0
Flash P2K Rainbow = 1,0,2,UMTS 3G Rainbow,16
Flash LCA Neptune = 1,0,2,GSM Neptune LT,16
Flash A920 Paragon = 3,2,12,Flash A920,0
Motorola V.120e = 1,0,0,Motorola V.120e,0

Flash MSM5100 = 1,0,0,Flash CDMA1x MSM5100,0
Flash MSM6050 = 1,0,0,Flash CDMA1X MSM6050,0
Flash MSM6100 = 1,0,0,Flash CDMA1X MSM6100,0
Flash MSM6300 = 1,0,0,Flash CDMA1X MSM6300,0
Flash MSM6500 = 1,0,0,Flash CDMA1X MSM6500,0
Flash MSM6025 = 1,0,0,Flash CDMA1X MSM6025,0

P2K POG = 1,0,1,Blank POG,0

S Blank Rainbow POG = 1,1,2,Secure Blank Rainbow POG,16
S Flash Rainbow POG = 1,1,2,Secure Reflash Rainbow POG,16

Motorola Ezx Bootloader = 2,0,36,Motorola Reflash Ezx,0
Blank Ezx = 2,0,36,Motorola Blank Ezx,0

S Blank Neptune LTS = 1,1,34,Secure Blank Neptune LTS,16
S Flash Neptune LTS = 1,1,2,Secure Reflash Neptune LTS,16

S Blank Neptune LTE = 1,1,34,Secure Blank Neptune LTE,16
S Flash Neptune LTE = 1,1,2,Secure Reflash Neptune LTE,16

S Blank Neptune LTE2 = 1,1,2,Prod Blank LTE2,16
SE Blank Neptune LTE2 = 1,1,2,Eng Blank LTE2,16
SE Flash Neptune LTE2 = 1,1,2,Eng Reflash LTE2,16
S Flash Neptune LTE2 = 1,1,2,Prod Reflash LTE2,16

S Blank Neptune VLT = 1,1,2,Secure Blank Neptune VLT,16
SE Blank Neptune VLT = 1,1,2,Eng Blank Neptune VLT,16
SE Flash Neptune VLT = 1,1,2,Eng Reflash Neptune VLT,16
S Flash Neptune VLT = 1,1,2,Secure Reflash Neptune VLT,16

Blank A920 Paragon POG = 3,0,12,Blank A920p,0
Blank A925 Paragon = 3,0,12,Blank A925,0
Flash A920 Paragon POG = 3,2,12,Flash A920p,0
Flash A925 Paragon = 3,2,12,Flash A925,0

S Blank Argon = 1,1,2,Secure Blank Argon,40
SE Blank Argon = 1,1,2,Eng Blank Argon,40
S Flash Argon = 1,1,2,Secure Flash Argon,40
SE Flash Argon = 1,1,2,Eng Flash Argon,40

S Blank SCM-A11 = 1,1,2,Secure Blank SCM-A11,40
SE Blank SCM-A11 = 1,1,2,Eng Blank SCM-A11,40
S Flash SCM-A11 = 1,1,2,Secure Flash SCM-A11,40
SE Flash SCM-A11 = 1,1,2,Eng Flash SCM-A11,40

S Blank Neptune LTE R3 = 1,1,2,Prod Blank LTE ROM3,16
SE Blank Neptune LTE R3 = 1,1,2,Eng Blank LTE ROM3,16
SE Flash Neptune LTE R3 = 1,1,2,Eng Reflash LTE ROM3,16
S Flash Neptune LTE R3 = 1,1,2,Prod Reflash LTE ROM3,16
FLASHBVY = 0,0,0, Intel Blank Bulverde,16
NS Flash Bulverde = 3,0,12, Non-Secure Bulverde,16




Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web5, load: 1.66