HighPoint Web RAID Management Software (WebGUI) for Windows v1.4
Copyright (C) 2007 HighPoint Technologies, Inc. All rights reserved.
Last updated on June 15, 2007
HighPoint Web RAID Management Software (WebGUI) is used to monitor and configure
your hard disks and RAID arrays attached to HighPoint RAID controllers.
This file is divided into the following major sections:
1. Files Listing
2. System Requirements
3. Installing the Software Package
4. Running the Management Software
5. Rivision History
1. Files Listing
------------------
README.txt This file
confs <DIR> I2C configuration file for disk enclosure
Other files Installation package files
2. System Requirements
------------------------
The software package must be installed on system with supported HighPoint
RAID controllers installed, and the device driver must be loaded to run
the service.
A web browser with XML support is required on the client side, e.g. Internet
Explorer 6.0, Mozilla or FireFox.
3. Installing the Software Package
------------------------------------
To install the packge, run "setup.exe" on disk1.
4. Running the Management Software
------------------------------------
To run the WebGUI, start your browser and enter the following URL address:
https://localhost:7402
If you are accessing WebGUI on a remote system please change "localhost"
to the server address.
If you can't connect to local system, please check if hptsvr.exe is running on
the system. If not, you can start it manually by running "net start hptsvr"
under a Windows command prompt.
If you can't connect to a remote system, check if hptsvr is running on that
system and you can access the remote system via TCP/IP connection. If you
have firewall configured, make sure TCP port 7402 is not blocked.
5. Rivision History
---------------------
v1.4.5 06/15/2007
Add SHI(Storage Health Inspector) function support.
Add 32 Max Members per array support(Need driver support).
v1.4.4 03/07/2007
Add Port multiplier support.
Add HDD serial number display.
v1.4.3 11/16/2006
Add sector repair logging.
Minor display fixes.
v1.4.2 10/23/2006
Add controller information display for RR3xxx adapters.
v1.4.1 09/25/2006
Add RR3xxx controller support.
v1.3 02/20/2006
Add enable/disable controller audible alarm option.
v1.2 08/03/2005
Add multi-user support.
Fix problem on arrays with more then 8 member drives.
v1.1 07/21/2005
Add support for RR18xx/RR1640/RR4x4 controllers.
v1.0 04/28/2005
First release for RR22xx
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.