WINXP.TXT Driver File Contents (dge-528t_shipping_driver.zip)

  Windows XP
  
  Introduction:
  -------------
  This document describes the procedure to install Windows XP driver
  for D-Link DGE-528T Gigabit Ethernet Adapter.
  
  Location of Windows XP Driver : \WINXP\DLKRTGB.SYS
  
  Installing driver for Windows XP :
  -------------------------------------------------------------------
  Before you start with the installation process, make sure that your
  adapter should be properly installed in your PCI bus slot.
  Executing Windows XP, it will auto-detect your system configuration and
  find the adapter hardware.
  (If Windows XP does not prompt that it detects the Ethernet Controller,
  there must be something wrong with the DGE-528T Gigabit Ethernet
  adapter or your system enviroment.)
  
  1. Ask you to select which driver you want to install, select "Install from
  a list or specific location(Advanced)".
  
  2. Insert the DGE-528T Windows driver disk and specify the setup file
  pathname, Ex: D:\WINXP.
  
  3. The Windows XP will start to copy the drivers into the system.
  
  4. Windows XP will finish the other installation procedure automatically.

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 0.73