Linux 2.2.x =========== This document contains instructions on installing Linux driver and adjusting speed for D-Link DGE-528T Gigabit Ethernet Adapter Installing Driver: ------------------ dge528.c -- DGE-528T Linux driver version 1.0 1. This driver supports D-Link DGE-528T Gigabit Ethernet Adapter for Linux kernel 2.2.x. 2. Installation steps: (1)Compiling dge528.c using 'Makefile'. "gcc -DMODULE -Wall -Wstrict-prototypes -O6 -c dge528.c". (2)Move the object code dge528.o to the directory "/lib/modules/2.2.14-5.0/net". "cp dge528.o /lib/modules/2.2.14-5.0/net" (3)Insert module to kernel. "insmod dge528" (4)Check driver status "dmesg" 3. The media can be forced to one of the 5 modes as follows. The link speed and duplex mode can be forced in 5 modes. Command: "insmod dge528 media = SET_MEDIA" Ex: "insmod dge528 media = 0x04" will force link mode to be 100Mpbs Half-duplex. SET_MEDIA can be: _10_Half = 0x01 _10_Full = 0x02 _100_Half = 0x04 _100_Full = 0x08 _1000_Full = 0x10Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.