**********************************************************************
* Accton Technology Corporation *
* EN1207D-TX PCI FAST ETHERNET ADAPTER *
* NetWare Server Driver Installation Overview *
* *
* Copyright (C) 1998 by Accton Technology Corporation. *
* All rights reserved. *
**********************************************************************
Contents:
A. File Description
B. Driver Installation for NetWare Server 3.1x, 4.x
C. Parameters Description for ACCODI.LAN
A. File Description
--------------------
-------------------------------------------------------------------------------
Filename Description
-------------------------------------------------------------------------------
SERVER.TXT This file. Presents a summary of the contents for
NetWare Server driver installation.
ACCODI.LAN Accton's 32-Bit ODI Server driver for EN1207D-TX.
This driver complies with NetWare ODI Server driver
SPEC 3.31.
EN1207D.LDI The (ACCODI.LAN) driver installation information
file for NetWare Server 4.X, NeDOS32, Windows 3.x.
ETHERTSM.NLM NetWare Server 3.1X, 4.X LAN driver Topology
Specific Module (TSM) for Ethernet.
3.1X\NBI31X.NLM NetWare Server 3.1X Bus Interface module.
3.1X\MSM31X.NLM NetWare Server 3.1X LAN driver Media Support
Module (MSM).
4.X\MSM.NLM NetWare Server 4.X LAN driver Media Support
Module (MSM).
-------------------------------------------------------------------------------
B. Driver(Spec. 3.31) Installation for NetWare Server 3.1x, 4.x
B.1 Driver Installation for NetWare Server 3.12
1. Insert Accton's EN1207D-TX Driver Diskette in your PC's
floppy drive (A: or B:).
2. Change to the NetWare Server directory (for example:
CD\SERVER.312)
3. Copy the following files from Driver Diskette to the NetWare
Server directory.
\NETWARE\ODI\SERVER\3.12\NBI31X.NLM
\NETWARE\ODI\SERVER\3.12\MSM31X.NLM
\NETWARE\ODI\SERVER\ETHERTSM.NLM
\NETWARE\ODI\SERVER\ACCODI.LAN
4. Sample AUTOEXEC.NCF for NetWare Server 3.12
AUTOEXEC.NCF
============
LOAD C:NBI31X
LOAD C:MSM31X
LOAD C:ETHERTSM
LOAD C:ACCODI FRAME=ETHERNET_802.2 NAME=E_8022
LOAD C:ACCODI FRAME=ETHERNET_802.3 NAME=E_8023
LOAD C:ACCODI FRAME=ETHERNET_II NAME=E_II
LOAD C:ACCODI FRAME=ETHERNET_SNAP NAME=E_SNAP
BIND IPX E_8022 NET=10
BIND IPX E_8023 NET=20
BIND IPX E_II NET=30
BIND IPX E_SNAP NET=40
B.2 Driver Installation for NetWare Server 4.X
0. Copy the following files from the Driver Diskette to the
NetWare Server directory.
\NETWARE\ODI\SERVER\4.X\NBI.NLM
\NETWARE\ODI\SERVER\4.X\MSM.NLM
\NETWARE\ODI\SERVER\ETHERTSM.NLM
\NETWARE\ODI\SERVER\ACCODI.LAN
1. Change to NetWare Server directory (for example:
CD\NWSERVER )
2. Load the NetWare Server System by typing SERVER, then press <Enter>.
3. When the Server prompt appears, load the NetWare Server
Installation Utility. That is,
:LOAD INSTALL
4. Select "Driver options" from the "Installtion Options" menu, then
press <Enter>.
5. Select "Configure network drivers" from the "Driver Options" menu,
then press <Enter>.
6. Select "Select a driver" from the "Additional Driver Actions" menu,
then press <Enter>.
7. Press <Ins> to install a unlisted driver, then press <F3> to
specify a different path.
8. Insert Accton's EN1207D-TX Driver Diskette in your PC's floppy
drive and specify the path A:\NETWARE\SERVER.
9. Select "Accton EN1207D-TX PCI Fast Ethernet Driver" from the
"Select a driver to install:" menu, then press <Enter>.
10. If necessary, select "Select/Modify driver parameters and
protocols" from the "Board EN1207D_1 (Driver ACCODI) Actions" menu,
then press <Enter> to set up the driver parameters.
(Please refer to content D.) Otherwise, select
"Save parameters and load driver", then press <Enter>.
11. Follow instructions to complete driver installation.
12. Sample AUTOEXEC.NCF for NetWare Server 4.X
AUTOEXEC.NCF (one board)
========================
LOAD C:NBI
LOAD C:MSM
LOAD C:ETHERTSM
LOAD C:ACCODI FRAME=ETHERNET_802.2 NAME=E_8022
LOAD C:ACCODI FRAME=ETHERNET_802.3 NAME=E_8023
LOAD C:ACCODI FRAME=ETHERNET_II NAME=E_II
LOAD C:ACCODI FRAME=ETHERNET_SNAP NAME=E_SNAP
BIND IPX E_8022 NET=10
BIND IPX E_8023 NET=20
BIND IPX E_II NET=30
BIND IPX E_SNAP NET=40
AUTOEXEC.NCF (two boards)
=========================
LOAD C:NBI
LOAD C:MSM
LOAD C:ETHERTSM
LOAD C:ACCODI PCI_SLOT=3 FRAME=ETHERNET_802.2 NAME=E_8022_1
LOAD C:ACCODI PCI_SLOT=3 FRAME=ETHERNET_802.3 NAME=E_8023_1
LOAD C:ACCODI PCI_SLOT=3 FRAME=ETHERNET_II NAME=E_II_1
LOAD C:ACCODI PCI_SLOT=3 FRAME=ETHERNET_SNAP NAME=E_SNAP_1
LOAD C:ACCODI PCI_SLOT=4 FRAME=ETHERNET_802.2 NAME=E_8022_2
LOAD C:ACCODI PCI_SLOT=4 FRAME=ETHERNET_802.3 NAME=E_8023_2
LOAD C:ACCODI PCI_SLOT=4 FRAME=ETHERNET_II NAME=E_II_2
LOAD C:ACCODI PCI_SLOT=4 FRAME=ETHERNET_SNAP NAME=E_SNAP_2
BIND IPX E_8022_1 NET=10
BIND IPX E_8023_1 NET=20
BIND IPX E_II_1 NET=30
BIND IPX E_SNAP_1 NET=40
BIND IPX E_8022_2 NET=50
BIND IPX E_8023_2 NET=60
BIND IPX E_II_2 NET=70
BIND IPX E_SNAP_2 NET=80
C. Parameter Description for ACCODI.LAN
The following parameters are used in ACCODI.LAN.
1. SLOT : specifies which adapter is enabled when multiple EN1207D-TX
adapters are found in your computer. The SLOT keyword is an
index value corresponding to PCI BIOS. The mapping from SLOT
to physical PCI slot is different from one machine to
another.
Ex: LOAD ACCODI SLOT=3 FRAME=ETHERNET_802.2
LOAD ACCODI SLOT=4 FRAME=ETHERNET_II
2. FRAME : specifies which frame type is used by the driver. Accepted
values are Ethernet_802.2, Ethernet_802.3, Ethernet_II and
Ethernet_SNAP. Multiple frame types can be enabled
by loading the same driver with different FRAME types.
Ex: LOAD ACCODI FRAME=ETHERNET_802.2
LOAD ACCODI FRAME=ETHERNET_802.3
LOAD ACCODI FRAME=ETHERNET_II
LOAD ACCODI FRAME=ETHERNET_SNAP
3. NODE : Use a different address to replace the node address burned
in EEPROM.
Ex: LOAD ACCODI NODE=0000E8001122
4. Medium : Specifies which medium type is used by the driver.
Accepted vaules are AUTO,100FULL,100HALF,10FULL and
10HALF.
Ex: LOAD ACCODI SLOT=3 FRAME=ETHERNET_802.2 Medium=100FULL
---
All trademarks and brand names mentioned belong to their
respective owners.
-- End of File --
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.