;
; OEMSETUP.INF - Windows NT ODI driver installation information file
; for Accton EN1207D Series PCI Fast Ethernet Adapter
;
; Copyright (C) 1999, Accton Technology Corp. All Rights Reserved.
[Identification]
OptionType = NetAdapter
[PlatformsSupported]
PCI
"Jazz-Internal Bus"
[LanguagesSupported]
ENG
[FileConstants]
UtilityInf = "UTILITY.INF"
ParamInf = "NCPARAM.INF"
subroutineinf = "SUBROUTN.INF"
NwSubsInf = "NWSUBS.INF"
Exit_Code = 0
NetEventDLL = "%SystemRoot%\System32\netevent.dll"
IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll"
Manufacturer = "Accton"
ProductMajorVersion = "1"
ProductMinorVersion = "00"
ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion)
DriverName = "OdiLoad"
OdiModules = "ODI_Modules"
NetRuleHardwareType = "nwDriver nwAdapter"
NetRuleHardwareBindForm = " yes yes container"
ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(DriverName)"\CurrentVersion"
;
; ParamKeyname not used - not updated
; ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardware$(Option)Name)"\Parameters"
;
[GeneralConstants]
from = ""
to = ""
ExitCodeOk = 0
ExitCodeCancel = 1
ExitCodeFatal = 2
KeyNull = ""
MAXIMUM_ALLOWED = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct = ""
KeyParameters = ""
TRUE = 1
FALSE = 0
NoTitle = 0
ExitState = "Active"
OldVersionExisted = $(FALSE)
DriverPath = $(!STF_NTPATH)\netware
[ODIParameters]
ODINodeAddress = ""
ODIDriverAdditionalParms = {}
ODICustomList = {}
ODITokenRing = ""
ODITokenRingSnap = ""
;
; File specific Parameters:
; ISA LAN Driver file:
; ODISlotList = {}
; ODIDefaultSlot = ""
; MCA and EISA LAN Driver files:
; ODISlotList = {1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16}
; ODIDefaultSlot = "2"
;
ODISlotList = {}
ODIDefaultSlot = ""
[date]
Now = {} ? $(!LIBHANDLE) GetSystemDate
[Identify]
read-syms Identification
set Status = STATUS_SUCCESSFUL
set Identifier = $(OptionType)
set Media = #("Source Media Descriptions", 1, 1)
Return $(Status) $(Identifier) $(Media)
[ReturnOptions]
set Status = STATUS_FAILED
set OptionList = {}
set OptionTextList = {}
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
ifstr(i) $($1) == ""
goto returnoptions
endif
set PlatformList = ^(PlatformsSupported, 1)
Ifcontains(i) $($1) in $(PlatformList)
goto returnoptions
else
set Status = STATUS_NOTSUPPORTED
goto finish_ReturnOptions
endif
else
set Status = STATUS_NOLANGUAGE
goto finish_ReturnOptions
endif
returnoptions = +
set OptionList = ^(Options, 1)
set OptionTextList = {}
ForListDo $(OptionList)
set OptionTempString = " ODI "#($($),Title,1)" Adapter for NetWare"
set OptionTextList = >($(OptionTextList), $(OptionTempString) )
EndForListDo
set Status = STATUS_SUCCESSFUL
Debug-Output "OEMNADOD.INF-[finish_ReturnOptions]:"
Debug-Output "OEMNADOD.INF- Status = "$(Status)
Debug-Output "OEMNADOD.INF- OptionList = "$(OptionList)
Debug-Output "OEMNADOD.INF- OptionTextList = "$(OptionTextList)
finish_ReturnOptions = +
Return $(Status) $(OptionList) $(OptionTextList)
[InstallOption]
set Option = $($1)
set SrcDir = $($2)
set AddCopy = $($3)
set DoCopy = $($4)
set DoConfig = $($5)
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) NOT-IN $(LanguageList)
Return STATUS_NOLANGUAGE
endif
set-subst LF = "\n"
read-syms GeneralConstants
read-syms FileConstants
read-syms ODIParameters
read-syms DialogConstants$(!STF_LANGUAGE)
ifstr(i) $(!NTN_Origination) == "NCPA"
set Continue = "OK"
endif
read-syms FileConstants$(!STF_LANGUAGE)
detect date
; set-title $(Function$(Option)Title)
set to = Begin
set from = Begin
set CommonStatus = STATUS_SUCCESSFUL
EndWait
Begin = +
set CurrentInstallMode = ""
Ifstr(i) $(!NTN_InstallMode) == deinstall
set StartLabel = removeadapter
goto skipmakingthelists
else-Ifstr(i) $(!NTN_InstallMode) == Update
set StartLabel = UpgradeSoftware
set CurrentInstallMode = configure
set DoCopy = YES
set AddCopy = YES
else-Ifstr(i) $(!NTN_InstallMode) == bind
set StartLabel = bindingadapter
goto skipmakingthelists
else-Ifstr(i) $(!NTN_InstallMode) == configure
set StartLabel = configureadapter
set CurrentInstallMode = configure
else
set DoCopy = YES
set AddCopy = YES
set StartLabel = installadapter
set OEM_ABANDON_OPTIONS = {}
set OEM_ABANDON_SOFTWARE = FALSE
set OEM_ABANDON_ON = TRUE
endif
set ParameterListNames = ^(DefaultParameterLists, 1) ; NWIRQList, NWMEMList1, etc.
set ListNames = ^(ODIListNamesSection, 1) ; List1
set ODIKeywordList = ^(ChoicesNamesList, 1) ; Int, mem, Port, etc.
set ODITitleList = ^(ChoicesNamesList, 2) ; Interrupt Number, Port, etc.
set MSParameterList = ^(ChoicesNamesList, 3) ; InterruptNumber, IOBaseAddress, etc.
set DriverListNames = {}
set ODINumberofDriverLists = 0
ForListDo ^($(Option),0 )
ifcontains(i) $($) IN $(ListNames)
set DriverListNames = >($(DriverListNames), $($))
else-ifstr(i) $($) == "CUSTOM"
set ODICustomList = #($(Option), Custom, 1)
endif
EndForListDo
QueryListSize ODINumberofDriverLists $(DriverListNames)
;
; DriverListNames now contains the List names the selected ODI driver has (i.e. {List1, List2})
; ODINumberofDriverLists now contains the number of lists used
;
Debug-Output "DriverListNames = "$(DriverListNames)
Debug-Output "Size of DriverListNames = "$(ODINumberofDriverLists)
ForListDo $(DriverListNames)
set $($)Keyword = #($(Option), $($), 1)
ifstr $($($)Keyword) != ""
set $($)Default = #($(Option), $($), 3)
ifcontains(i) $($($)Keyword) IN $(ODIKeywordList)
set $($)Title = *($(ODITitleList), ~($(ODIKeywordList), $($($)Keyword)))
set ThisListName = #($(Option), $($), 2)
set MSParameterName$(#) = *($(MSParameterList), ~($(ODIKeywordList), $($($)Keyword)))
set FinalList = {}
ifcontains(i) $(ThisListName) IN $(ParameterListNames)
ifstr(i) #($(Option), $($), 4) == "ALL"
set FinalList = ^($(ThisListName), 1)
else
set CountUpTo = #($(Option), $($), 5)
ifstr(i) $(CountUpTo) == "END"
set CountUpTo = $(MAXIMUM_ALLOWED)
endif
set StartNumber = #($(Option), $($), 4))
ForListDo ^($(ThisListName), 1)
ifint $(#) >= $(StartNumber)
ifint $(#) <= $(CountUpTo)
set FinalList = >($(FinalList), $($))
endif
endif
EndForListDo
endif
else
;
; User passed in the list
;
Debug-Output "User passed in a list"
set $($)Title = #($(Option), $($), 2)
set FinalList = #($(Option), $($), 4)
endif
else
;
; User passed in a new keyword
;
Debug-Output "User passed in a new keyword"
set $($)Title = #($(Option), $($), 2)
set MSParameterName$(#) = ""
set FinalList = #($(Option), $($), 4)
endif
set $($)List = $(FinalList)
endif
Debug-Output "List"$(#)"Title = "$($($)Title)
Debug-Output "List"$(#)"Default = "$($($)Default)
Debug-Output "List"$(#)"Keyword = "$($($)Keyword)
Debug-Output "List"$(#)"List = "$($($)List)
Debug-Output "MSParameterName"$(#)" = "$(MSParameterName$(#))
EndForListDo
skipmakingthelists = +
Debug-Output "Starting skipmakingthelist"
set ODILANDriverTitle = #($(Option), Title, 1)
Split-String #($(Option), DriverName, 2) "." SplitFileNameList
set ODILANDriverName = *($(SplitFileNameList), 1)
set ODIMediaType = #($(Option), MediaType, 1)
set ODICardType = #($(Option), CardType, 1)
set ODICardId = #($(Option), CardId, 1)
ifstr(i) $(ODICardType) == "PCI"
set ODIVendor = #($(Option), Vendor, 1)
endif
ifstr(i) #($(Option), CanShareSlot, 1) == "YES"
set SkipDescriptionCheck = "NO"
else
set SkipDescriptionCheck = "YES"
endif
Debug-Output "ODILANDriverName = "$(ODILANDriverName)
Debug-Output "ODIMediaType = "$(ODIMediaType)
ifstr(i) $(ODIMediaType) == "ETHERNET"
set NdisMediaType = "1"
else-ifstr(i) $(ODIMediaType) == "TOKEN-RING"
set NdisMediaType = "2"
else-ifstr(i) $(ODIMediaType) == "FDDI"
set NdisMediaType = "4"
else
Debug-Output "OEMNADOD.INF: Unknown media type "$(ODIMediaType)
set NdisMediaType = ""
endif
set from = $(fatal)
set to = $(fatal)
goto $(StartLabel)
installadapter = +
Ifstr(i) $(DoCopy) == "YES"
;
; Get source location
;
Shell $(NwSubsInf), DoAskLANSource, $(!STF_CWDDIR), $(SrcDir) YES
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto end
Endif
Set SrcDir = $($R1)
Endif
install "Install-Option"
goto adapteroptions
configureadapter = +
Debug-Output "Starting configureadapter."
Ifstr $(KeyProduct) == $(KeyNull)
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "OEMNADOD.INF: Cannot find component product key "$(!NTN_RegBase)
goto fatalregistry
Endif
Endif
Set AdapterNumber = ""
Shell $(UtilityInf) FindService, $(KeyProduct)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "OEMNADOD.INF: FindService shell failure "$($ShellCode)
Goto ShellCodeError
Endif
Ifstr(i) $($R0) != NO_ERROR
Debug-Output "OEMNADOD.INF: FindService Error "$($R0)
Goto fatalregistry
endif
set KeyParameters = $($R2)
set ServiceAreaHandle = $($R1)
Ifstr $(KeyParameters) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "OEMNADOD.INF: Cannot find component service "$(KeyProduct)
goto fatalregistry
endif
set OldVersionExisted = $(TRUE)
set ValueName = ""
set ValueData = ""
set ValueStr = ""
set ValueList = {}
GetRegValue $(KeyParameters) ODILoadName ODILoadName
Set CardInstanceName = *($(ODILoadName),4)
Ifstr $(CardInstanceName) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "OEMNADOD.INF: Cannot find CardInstanceName"
goto fatalregistry
endif
set KeyToFind = $(!NTN_ServiceBase)"\ODILOAD\ODI_MODULES\"$(CardInstanceName)
OpenRegKey $(!REG_H_LOCAL) "" $(KeyToFind) $(MAXIMUM_ALLOWED) DriverKey
Ifstr $(DriverKey) == $(KeyNull)
set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE
Debug-Output "OEMNADOD.INF: Cannot find component product key = "$(KeyToFind)
goto fatalregistry
Endif
GetRegValue $(DriverKey) Parameters ParameterList
; get the data portion
set ParameterList = *($(ParameterList), 4)
Debug-Output "parameter list = "$(ParameterList)
ForListDo $(ParameterList)
set ThisParameterList = $($)
Split-String $($) " " SplitList
set KeyToSearchFor = *($(SplitList), 1)
set ValueToUse = *($(SplitList), 3)
Debug-Output "Keytosearchfor = "$(KeyToSearchFor)
Debug-Output "ValueToUse = "$(ValueToUse)
;
; #1 #2 #3
; "Parm" " " "Value"
;
set ValueFound = 0
;
; check frametypes for TOKEN-RING, TOKEN-RING_SNAP
;
ifstr(i) $(KeyToSearchFor) == "FRAME"
;
; Don't append Frametypes to ODIAdditionalParms, so set ValueFound = 1
;
set ValueFound = 1
QueryListSize SplitListSize $(SplitList)
ifstr(i) *($(SplitList), 3) == "TOKEN-RING"
set LastParameter = *($(SplitList), $(SplitListSize))
ifstr(i) $(LastParameter) == "MSB"
set ODITokenRing = "MSB"
else-ifstr(i) $(LastParameter) == "LSB"
set ODITokenRing = "LSB"
else
;
; Not there, so default to MSB
;
set ODITokenRing = "MSB"
endif
else-ifstr(i) *($(SplitList), 3) == "TOKEN-RING_SNAP"
set LastParameter = *($(SplitList), $(SplitListSize))
ifstr(i) $(LastParameter) == "MSB"
set ODITokenRingSnap = "MSB"
else-ifstr(i) $(LastParameter) == "LSB"
set ODITokenRingSnap = "LSB"
else
;
; Not there, so default to MSB
;
set ODITokenRingSnap = "MSB"
endif
endif
;
; Check for NODE parameter
;
else-ifstr(i) $(KeyToSearchFor) == "NODE"
set ODINodeAddress = $(ValueToUse)
set ValueFound = 1
;
; Check for SLOT parameter
;
else-ifstr(i) $(KeyToSearchFor) == "SLOT"
set ODIDefaultSlot = $(ValueToUse)
set ValueFound = 1
;
; Check for BUSNAME parameter - ignore it
;
else-ifstr(i) $(KeyToSearchFor) == "BUSNAME"
set ValueFound = 1
;
; Check for BUSTYPE parameter
;
else-ifstr(i) $(KeyToSearchFor) == "BUSTYPE"
set ValueFound = 1
set BusInterfaceType = $(ValueToUse)
;
; Check for BUS parameter
;
else-ifstr(i) $(KeyToSearchFor) == "BUS"
set ValueFound = 1
set BusNumber = $(ValueToUse)
endif
ForListDo $(DriverListNames)
ifstr(i) $(KeyToSearchFor) == $($($)Keyword)
set $($)Default = $(ValueToUse)
set ValueFound = 1
ifcontains(i) $(ValueToUse) NOT-IN $($($)List)
set $($)List = >($($($)List), $(ValueToUse))
endif
endif
EndForListDo
Debug-Output "Value Found = "$(ValueFound)
ifint $(ValueFound) == 0
set FoundInCustom = 0
ForListDo $(ODICustomList)
ifstr(i) $($) == $(ThisParameterList)
set FoundInCustom = 1
endif
EndForListDo
Debug-Output "Found in Custom = "$(FoundInCustom)
ifint $(FoundInCustom) == 0
ifstr $(ODIDriverAdditionalParms) == {}
set ODIDriverAdditionalParms = $(KeyToSearchFor)" "$(ValueToUse)
else
set ODIDriverAdditionalParms = >($(ODIDriverAdditionalParms), $(KeyToSearchFor)" "$(ValueToUse))
endif
endif
endif
EndForListDo
Debug-Output "AdditionalParms = "$(ODIDriverAdditionalParms)
Debug-Output "CustomList = "$(ODICustomList)
Debug-Output "BusType = "$(BusInterfaceType)
Debug-Output "Bus = "$(BusNumber)
adaptersetup =+
goto adapteroptions
adapteroptions = +
Debug-Output "Start adapteroptions."
set from = adapteroptions
LoadLibrary "NetWare for Windows NT" $(!STF_WINDOWSSYSPATH)"\"nwsetup.dll NwLibHandle
SetHelpFile $(!STF_WINDOWSSYSPATH)"\nls\english\nwnthelp.hlp" $(!MinimumID) $(!MaximumID)
dothedialog = +
Debug-Output "Start dothedialog."
ifint $(ODINumberofDriverLists) == 0
Debug-Output "ODINumberofDriveLists == 0."
ifstr(i) $(CurrentInstallMode) == configure
read-syms NoParms$(!STF_LANGUAGE)
ui start "WorkstationDLG" $(NwLibHandle)
ifstr(i) $(DLGEVENT) == "CONTINUE"
Debug-Output "OK hit"
else-ifstr(i) $(DLGEVENT) == "EXIT"
;
; user selected the advanced button
;
goto doadvancedsettings
endif
endif
else
Debug-Output "ODINumberofDriveLists != 0."
read-syms LANDriverDlg$(!STF_LANGUAGE)
set NotifyFields = {}
set ComboListItemsIn = {}
set ComboListItemsOut = {}
ForListDo $(DriverListNames)
set NotifyFields = >($(NotifyFields), "NO")
set ComboListItemsIn = >($(ComboListItemsIn), $($)List)
ifstr $($($)Value) == ""
set $($)Value = $($($)Default)
endif
set ComboListItemsOut = >($(ComboListItemsOut), $($)Value)
EndForListDo
ui start "LANDriverParms" $(NwLibHandle)
ifstr(i) $(DLGEVENT) == "CONTINUE"
Debug-Output "Continue hit"
else-ifstr(i) $(DLGEVENT) == "BACK"
Debug-Output "Action: CANCEL. Bye."
set CommonStatus = STATUS_USERCANCEL
ui pop 1
FreeLibrary $(NwLibHandle)
goto end
else-ifstr(i) $(DLGEVENT) == "EXIT"
doadvancedsettings =+
;
; user selected the advanced button
;
Debug-Output "Action: ADVANCED DIALOG"
read-syms AdvancedDialog$(!STF_LANGUAGE)
set RadioIn = {}
set ComboListItemsIn = {}
set ComboListItemsOut = {}
set ComboOut = $(ODIDefaultSlot)
ifstr(i) $(ODIMediaType) == "TOKEN-RING"
ifstr(i) $(ODISlotList) == {}
set DlgTemplate = "DLG_ADVANCEDDRIVER3"
else
set ComboListItemsIn = { ODISlotList }
set ComboListItemsOut = { ComboOut }
set DlgTemplate = "DLG_ADVANCEDDRIVER1"
endif
ifstr(i) $(ODITokenRing) == "LSB"
set RadioIn = { 2 }
else
set RadioIn = { 1 }
endif
ifstr(i) $(ODITokenRingSnap) == "LSB"
set RadioIn = >($(RadioIn), "4")
else
set RadioIn = >($(RadioIn), "3")
endif
else
ifstr(i) $(ODISlotList) == {}
set DlgTemplate = "DLG_ADVANCEDDRIVER4"
else
set ComboListItemsIn = { ODISlotList }
set ComboListItemsOut = { ComboOut }
set DlgTemplate = "DLG_ADVANCEDDRIVER2"
endif
endif
ui start "AdvancedDialog" $(NwLibHandle)
ui pop 1
ifstr(i) $(DLGEVENT) == "CONTINUE"
set ODINodeAddress = *($(EditTextOut), 1)
set ODIDefaultSlot = *($(ComboOut), 1)
ifcontains "2" IN $(RadioOut)
set ODITokenRing = "LSB"
else
set ODITokenRing = "MSB"
endif
ifcontains "4" IN $(RadioOut)
set ODITokenRingSnap = "LSB"
else
set ODITokenRingSnap = "MSB"
endif
else-ifstr(i) $(DLGEVENT) == "BACK"
Debug-Output "Action: CANCEL. Bye."
endif
goto dothedialog
else
Debug-Output "Action: unknown. Bye."
ui pop 1
FreeLibrary $(NwLibHandle)
goto end
endif
ui pop 1
ForListDo $(DriverListNames)
Debug-Output "List"$(#)"Value = "$($($)Value)
EndForListDo
endif
Debug-Output "FreeLibrary $(NwLibHandle)"
FreeLibrary $(NwLibHandle)
ifint $(OldVersionExisted) == $(TRUE)
ifstr(i) $(CurrentInstallMode) == configure
Debug-Output "going to writeparameters based on OldVersionExisted."
goto writeconfigureparameters
endif
endif
StartWait
goto writeparameters
writeparameters = +
Debug-Output "Starting writeparameters."
Debug-Output "Calling GetPCIInformation."
; Use the GetPCIInformation utiltiy to find the bus number and slot number
; the adapter is installed in.
set NTBusType = 5
Shell $(UtilityInf), GetPCIInformation, $(ODIVendor) $(ODICardId)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
EndWait
goto ShellCodeError
endif
set AdapterList = $($R0)
set ProductHardwareDescription = +
"ODI "$(ODILANDriverTitle)" Adapter for NetWare"
ForListDo $(AdapterList)
; Steps need to be taken for multiple adapters of the same type.
set NTBusNumber = *($($),1)
set NTSlotNumber = *($($),2)
Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(NTBusNumber), +
$(NTSlotNumber), $(ProductHardwareDescription), +
$(ODILANDriverName), $(SkipDescriptionCheck)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr $($R0) != "NO_ERROR"
set Error = $($R0)
goto fatal
endif
ifstr(i) $($R1) != "YES"
Debug-Output "Doing Shell AddHardwareComponent."
Shell $(UtilityInf), AddHardwareComponent, $(ODILANDriverName),+
$(STF_CONTEXTINFNAME),$(ProductKeyName)
ifint $($R4) != -1
Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS),+
$(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4))
endif
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "OEMNADOD.INF:Cannot add hardware component "$($ShellCode)
EndWait
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "OEMNADOD.INF: Registry error: add hardware component "$(RegistryErrorIndex)
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
goto fatalregistry
endif
set KeyParameters = $($R3)
set KeyAdapterRules = $($R2)
set AdapterNumber = $($R4)
Set-add TempAdapterNumber = $(AdapterNumber),0
set CardInstanceName = $(ODILANDriverName)" #"$(TempAdapterNumber)
set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),+
$(Manufacturer)}, {Title,$(NoTitle),$(!REG_VT_SZ),+
"["$($R4)"] ODI "$(ODILANDriverTitle)" Adapter for NetWare"},+
{Description,$(NoTitle),$(!REG_VT_SZ),+
$(ProductHardwareDescription)},+
{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ODILANDriverName)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)},+
{OdiAdapter,$(NoTitle),$(!REG_VT_DWORD),1}}
Shell $(UtilityInf), AddValueList, $($R1), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "OEMNADOD.INF: AddValueList ShellCode error "$($ShellCode)
EndWait
goto ShellCodeError
endif
CloseRegKey $($R1)
set TempProdName = """"$(ODILANDriverName)$(AdapterNumber)""""
set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),+
$(NetRuleHardwareType)},{bindform,$(NoTitle),$(!REG_VT_SZ),+
$(TempBindForm)}, {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "OEMNADOD.INF: AddValueList ShellCode error "$($ShellCode)
EndWait
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
EndWait
Debug-Output "OEMNADOD.INF: AddValueList Registry error "$(RegistryErrorIndex)
CloseRegKey $(KeyParameters)
CloseRegKey $(KeyAdapterRules)
goto fatalregistry
endif
CloseRegKey $(KeyAdapterRules)
SetRegValue $(KeyParameters) {OdiLoadName,$(NoTitle),$(!REG_VT_SZ),$(CardInstanceName)}
SetRegValue $(KeyParameters) {BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(NTBusNumber)}
SetRegValue $(KeyParameters) {SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(NTSlotNumber)}
writeconfigureparameters = +
; Jump to here if the drivers is already installed and specific driver
; configuration was selected.
ifstr(i) $(NdisMediaType) == ""
set NdisMediaType = "1"
Debug-Output "OEMNADOD.INF: Media type NOT set"
endif
set NewValueList = {{MediaType,$(NoTitle),$(!REG_VT_DWORD), +
$(NdisMediaType)}}
ForListDo $(DriverListNames)
ifstr $(MSParameterName$(#)) != ""
set-hextodec DecValue = $($($)Value)
set ValueToAdd = {$(MSParameterName$(#)),$(NoTitle), +
$(!REG_VT_DWORD), $(DecValue)}
set NewValueList = >($(NewValueList), $(ValueToAdd))
endif
EndForListDo
Debug-Output "AddValueList with KeyParameters = "$(KeyParameters)
Debug-Output "and NewValueList = "$(NewValueList)
Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "OEMNADOD.INF: AddValueList ShellCode error "$($ShellCode)
EndWait
goto ShellCodeError
endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output "OEMNADOD.INF: AddValueList Registry error "$($ShellCode)
EndWait
goto fatalregistry
endif
set PromptForSrcRouting = "FALSE"
Ifstr(i) $(ODIMediaType) == "ETHERNET"
set ODIParmList = {"Frame ETHERNET_802.2", +
"Frame ETHERNET_802.3", +
"Frame ETHERNET_II", +
"Frame ETHERNET_SNAP" }
else-Ifstr(i) $(ODIMediaType) == "TOKEN-RING"
set ODIParmList = {"Frame TOKEN-RING "$(ODITokenRing), +
"Frame TOKEN-RING_SNAP "$(ODITokenRingSnap) }
;If there is an ODI stack available remove the comment on the next line
;set PromptForSrcRouting = "TRUE"
else-Ifstr(i) $(ODIMediaType) == "FDDI"
set ODIParmList = {"Frame FDDI_802.2", +
"Frame FDDI_SNAP" }
;If there is an ODI stack available remove the comment on the next line
;set PromptForSrcRouting = "TRUE"
else
set ODIParmList = {}
endif
Debug-Output "Framenames = "$(ODIParmList)
;
; Build List to send to ODI_MODULES\CARDNAME
;
ForListDo $(DriverListNames)
ifstr $($($)Value) == "Present"
set ODIParmList = >($(ODIParmList), $($($)Keyword))
else-ifstr $($($)Value) != "Not Present"
set ODIParmList = >($(ODIParmList), $($($)Keyword)" "$($($)Value))
endif
EndForListDo
ifstr $(ODINodeAddress) != ""
set ODIParmList = >($(ODIParmList), "Node "$(ODINodeAddress))
endif
ifstr $(ODIDefaultSlot) != ""
set ODIParmList = >($(ODIParmList), "Slot "$(ODIDefaultSlot))
endif
ForListDo $(ODIDriverAdditionalParms)
ifstr $($) != ""
set ODIParmList = >($(ODIParmList), $($))
endif
EndForListDo
ForListDo $(ODICustomList)
ifstr $($) != ""
set ODIParmList = >($(ODIParmList), $($))
endif
EndForListDo
Debug-Output "ODIParmList = "$(ODIParmList)
Debug-Output "Calling NwSubsInf to NwAddOdiLoadModule."
Shell $(NwSubsInf) NwAddOdiLoadModule $(CardInstanceName) +
$(AdapterNumber) $(ODIParmList)
Debug-Output "Back from Calling NwSubsInf to NwAddOdiLoadModule."
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "OEMNADOD.INF: NwAddOdiLoadModule failure "$($ShellCode)
Goto ShellCodeError
Endif
Set ErrorString = $($R0)
Ifstr(i) $(ErrorString) != NO_ERROR
Debug-Output "OEMNADOD.INF: NwAddOdiLoadModule "$(ErrorString)
EndWait
goto fatalregistry
Endif
Debug-Output "PromptForSrcRouting = "$(PromptForSrcRouting)
Ifstr(i) $(PromptForSrcRouting) == "TRUE"
Shell $(NwSubsInf) NwConfigureSourceRouting "ODI"
Endif
Ifstr(i) $(!NTN_InstallMode) == install
; Open the driver key to add the busNumber, busType, HIN,
;and slotNumber
set KeyToFind = +
$(!NTN_ServiceBase)"\ODILOAD\ODI_MODULES\"$(CardInstanceName)
OpenRegKey $(!REG_H_LOCAL) "" $(KeyToFind) $(MAXIMUM_ALLOWED) +
DriverKey
set NewValueList = +
{{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(NTBusNumber)},+
{BusType,$(NoTitle),$(!REG_VT_DWORD),$(NTBusType)},+
{HIN,$(NoTitle),$(!REG_VT_DWORD),1},+
{SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(NTSlotNumber)}}
Shell $(UtilityInf), AddValueList, $(DriverKey), $(NewValueList)
CloseRegKey $(DriverKey)
Set OdiAdapterInstalledOkay = "1"
Endif
ifstr(i) $(CurrentInstallMode) == configure
goto endwriteparameters
endif
endif
EndForListDo
endwriteparameters = +
CloseRegKey $(KeyParameters)
EndWait
goto successful
bindingadapter =+
set Error = "Binding: Sorry, not yet implemented."
goto fatal
removeadapter = +
Shell $(NwSubsInf) NwRemoveAdapter $(!NTN_RegBase)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "OEMNADOD.INF: Shell Error NwRemoveAdapter "$($ShellCode)
Endif
Shell $(NwSubsInf) NwRemoveNtAdapter $(ProductKeyName) $(Manufacturer)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "OEMNADOD.INF: NwRemoveNtAdapter "$($ShellCode)
goto ShellCodeError
Endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
Debug-Output "OEMNADOD.INF: NwRemoveNtAdapter "$(RegistryErrorIndex)
Ifstr(i) $(RegistryErrorIndex) == "SHELL_CODE_ERROR"
goto ShellCodeError
Endif
goto fatalregistry
Endif
goto end
UpgradeSoftware = +
Ifstr(i) $(DoCopy) == "YES"
Ifstr(i) $(SrcDir) == ""
;
; Get source location
;
Shell $(NwSubsInf), DoAskLANSource, $(!STF_CWDDIR), $(SrcDir) YES
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Goto ShellCodeError
Else-Ifstr(i) $($R0) == STATUS_FAILED
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Goto end
Endif
Set SrcDir = $($R1)
Endif
Endif
install "Install-Option"
Ifstr(i) $(DoConfig) == "YES"
goto configureadapter
else
goto end
endif
successful = +
goto end
abandon = +
ForListDo $(OEM_ABANDON_OPTIONS)
Shell $(NwSubsInf) NwRemoveNtAdapter $(ProductKeyName) $(Manufacturer) $($)
Ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "OEMNADOD.INF: NwRemoveNtAdapter "$($ShellCode)
goto ShellCodeError
Endif
set RegistryErrorIndex = $($R0)
Ifstr(i) $(RegistryErrorIndex) != NO_ERROR
goto fatalregistry
endif
EndForListDo
goto end
warning = +
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(to)
else-ifstr(i) $($R1) == "CANCEL"
goto $(from)
else
goto "end"
endif
nonfatalinfo = +
Set CommonStatus = STATUS_USERCANCEL
Set Severity = STATUS
goto nonfatalmsg
nonfatal = +
Set Severity = NONFATAL
goto nonfatalmsg
nonfatalmsg = +
ifstr(i) $(Error) == ""
Set Severity = NONFATAL
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
ifstr(i) $($R1) == "OK"
goto $(from)
else
goto "end"
endif
fatalregistry = +
Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
goto fatal
fataldetect = +
Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "OEMNADOD.INF: ShellCode error: cannot get an error string."
goto ShellCodeError
endif
set Error = $($R0)
Goto fatal
fatal = +
ifstr(i) $(Error) == ""
Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL"
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
set Error = $($R0)
endif
Shell $(subroutineinf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto ShellCodeError
endif
goto setfailed
ShellCodeError = +
set DlgType = "MessageBox"
set STF_MB_TITLE = "Error: "$(Function$(Option)Title)
set STF_MB_TEXT = "Shell Code Error"
set STF_MB_TYPE = 1
set STF_MB_ICON = 3
set STF_MB_DEF = 1
ui start "Error Message"
goto setfailed
setfailed = +
set CommonStatus = STATUS_FAILED
ifstr(i) $(OEM_ABANDON_ON) == TRUE
set OEM_ABANDON_ON = FALSE
goto abandon
endif
goto end
end = +
goto term
term = +
; Ifstr(i) $(OdiAdapterInstalledOkay) == "1"
; Debug-Output "Calling NwSubsInf to GetOdiAdapterList."
; Shell $(NwSubsInf) GetOdiAdapterList
; ifint $($R3) < 2
; Set DlgType = "MessageBox"
; Set STF_MB_TITLE = "NetWare ODI LAN Drivers Setup"
; Set STF_MB_TEXT = "The NetWare ODI Adapter was successfully installed. "+
; "Your NetWare installation is COMPLETE."
; Set STF_MB_TYPE = 1
; Set STF_MB_ICON = 2
; Set STF_MB_DEF = 1
; ui start "Error Message"
; Endif
; Endif
;
; Check if ODINSUP needs to be installed
;
Shell $(NwSubsInf), CheckIfODINSUPIsNeeded
Return $(CommonStatus)
[Install-Option]
set STF_VITAL = ""
ifstr(i) $(AddCopy) == "YES"
AddSectionKeyFileToCopyList $(Option) DriverName $(SrcDir)i386\landrv $(!STF_WINDOWSSYSPATH)\netware
endif
ifstr(i) $(DoCopy) == "YES"
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
endif
ifstr(i) $(DoConfig) == "YES"
endif
Exit
;[Install-Update]
; set STF_VITAL = ""
; set STF_OVERWRITE = "VERIFYSOURCEOLDER"
;
; AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\netware
; AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH)
;
; set !STF_NCPA_FLUSH_COPYLIST = TRUE
; CopyFilesInCopyList
;
; exit
[Source Media Descriptions]
1 = "NetWare ODI LAN Drivers Disk" , TAGFILE = NTCLNT_5
[ProductType]
STF_PRODUCT = Winnt
STF_PLATFORM = I386
[DialogConstantsENG]
Help = "&Help"
;Exit = "&Cancel"
OK = "OK"
HelpContext = ""
Continue = "&Continue"
Cancel = "&Cancel"
Advanced = "&Advanced"
IDH_NETWAREWRKSTATIONPARMS = 901
IDH_NETWAREIPXBIND = 902
IDH_IPXSPXPARMS = 903
IDH_NETWORKPROTOCOL = 904
IDH_NETWAREODISETTINGS = 905
IDH_NETWARECLIENTINSTALL = 906
IDH_NETWARENDISODI = 907
IDH_NODEADDRESSOVERIDE = 908
IDH_RESMGRCONFIG = 951
[LANDriverDlgENG]
DlgType = "RadioCombination"
DlgTemplate = "List"$(ODINumberofDriverLists)
Caption = "ODI "$(ODILANDriverTitle)" Adapter Configuration"
EditTextIn = ""
EditTextLim = ""
CBOptionsGreyed = {}
HelpContext = $(IDH_NETWAREODISETTINGS)
[NoParmsENG]
DlgType = "RadioCombination"
DlgTemplate = "NO_PARAMETERS"
Caption = "ODI "$(ODILANDriverTitle)" Adapter Configuration"
EditTextIn = ""
EditTextLim = ""
CBOptionsGreyed = {}
HelpContext = ""
CBOptionsGreyed = {}
ComboListItemsIn = {}
ComboListItemsOut = {}
NotifyFields = {}
[AdvancedDialogENG]
DlgType = "RadioCombination"
Caption = "Advanced Settings"
EditTextIn = $(ODINodeAddress)
EditTextLim = 13
CBOptionsGreyed = {}
HelpContext = $(IDH_NODEADDRESSOVERIDE)
NotifyFields = {}
[FileConstantsENG]
ProCaption = "NetWare ODI LAN Drivers Setup"
ProCancel = "Cancel"
ProCancelMsg = "NetWare for Windows NT is not correctly installed. "+
"Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1 = "Copying:"
ProText2 = "To:"
[ChoicesNamesList]
"Line_Speed", "Line Speed", "LineSpeed"
[ODIListNamesSection]
List1
[Line_SpeedList]
Num1 = "Not Present"
Num2 = 100
Num3 = 10
[DefaultParameterLists]
Line_SpeedList
[Options]
ODI_EN1207DPCI
[ODI_EN1207DPCI]
Title = "Accton EN1207D Series PCI Fast Ethernet Adapter"
DriverName = 1, ACCODI.LAN
MediaType = "ETHERNET"
CardType = "PCI"
CardId = 4625 ;;Accton Device ID = 1211h (hex) --> 4625 (dec)
Vendor = 4371 ;;Accton Vendor ID = 1113h (hex) --> 4371 (dec)
Custom = {}
CanShareSlot = "NO"
List1 = "Line_Speed", Line_SpeedList, "Not Present", All
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.