*********************************************************************
* *
* Accton Technology Corporation *
* EN1207D Series PCI FAST ETHERNET ADAPTER *
* NetWare Client32 Driver Installation Overview *
* *
* Copyright (C) 1999 by Accton Technology Corporation. *
* All rights reserved. *
* *
*********************************************************************
Contents:
A. File Description
B. Driver Installation for NetWare Server 3.1x, 4.x, 5.x
C. Driver Installation for DOS32
D. Driver Installation for Microsoft Windows 3.x
E. Driver Installation for Microsoft Windows 95
F. Parameter Description for ACCODI.LAN
A. File Description
--------------------
-------------------------------------------------------------------------------
Filename Description
-------------------------------------------------------------------------------
CLIENT32.TXT This file. Presents a summary of the contents for
NetWare Client32 driver installation.
ACCODI.LAN Accton Client32 ODI driver for EN1207D series adapter.
This driver complies with NetWare ODI Server driver
SPEC 3.31.
EN1207D.LDI The (ACCODI.LAN) driver installation information
file for NetWare Server 4.X, NeDOS32, Windows 3.x.
EN1207D.INF The (ACCODI.LAN) driver installation information
file for Microsoft Windows 95.
OEMSETNT.INF The (ACCODI.LAN) driver installation information
file for Microsoft Windows NT.
-------------------------------------------------------------------------------
B. Driver (Spec. 3.31) Installation for NetWare Server 3.1x, 4.x
B.1 Driver Installation for NetWare Server 3.12
1. Insert Accton's EN1207D Series Driver Diskette in your PC's
floppy drive (A: or B:).
2. Change to the NetWare Server directory (for example:
CD\SERVER.312)
3. Copy the following files from the Driver Diskette to the NetWare
Server directory.
\NetWare\ODI\SERVER\3.12\NBI31X.NLM
\NetWare\ODI\SERVER\3.12\MSM31X.NLM
\NetWare\ODI\SERVER\ETHERTSM.NLM
\LANDRV32\ACCODI.LAN
4. Sample AUTOEXEC.NCF for NetWare Server 3.12
AUTOEXEC.NCF
============
LOAD C:NBI31X
LOAD C:MSM31X
LOAD C:ETHERTSM
LOAD C:ACCODI FRAME=ETHERNET_802.2 NAME=E_8022
LOAD C:ACCODI FRAME=ETHERNET_802.3 NAME=E_8023
LOAD C:ACCODI FRAME=ETHERNET_II NAME=E_II
LOAD C:ACCODI FRAME=ETHERNET_SNAP NAME=E_SNAP
BIND IPX E_8022 NET=10
BIND IPX E_8023 NET=20
BIND IPX E_II NET=30
BIND IPX E_SNAP NET=40
B.2 Driver Installation for NetWare Server 4.X
1. Change to the NetWare Server directory (for example:
CD\NWSERVER )
2. Load the NetWare Server System by typing SERVER, then press <Enter>.
3. When the Server prompt appears, load the NetWare Server
Installation Utility. That is,
:LOAD INSTALL
4. Select "Driver options" from the "Installtion Options" menu, then
press <Enter>.
5. Select "Configure network drivers" from the "Driver Options" menu,
then press <Enter>.
6. Select "Select a driver" from the "Additional Driver Actions"
menu, then press <Enter>.
7. Press <Ins> to install a unlisted driver, then press <F3> to
specify a different path.
8. Insert Accton's EN1207D Series Driver Diskette in your PC's
floppy drive and specify the drive path "A:\landrv32"
9. Select "Accton EN1207D Series PCI Fast Ethernet Driver" from the
"Select a driver to installed:" menu, then press <Enter>.
10. If necessary, select "Select/Modify driver parameters and
protocols" from the "Board EN1207D_1 (Driver ACCODI) Actions"
menu, then press <Enter> to setup the driver parameters.
(Please refer to content G.) Otherwise, select
"Save parameters and load driver", then press <Enter>.
11. Following screen instructions to complete driver installation.
12. Sample AUTOEXEC.NCF for NetWare Server 4.X
AUTOEXEC.NCF (one board)
========================
LOAD C:MSM
LOAD C:ETHERTSM
LOAD C:ACCODI FRAME=ETHERNET_802.2 NAME=E_8022
LOAD C:ACCODI FRAME=ETHERNET_802.3 NAME=E_8023
LOAD C:ACCODI FRAME=ETHERNET_II NAME=E_II
LOAD C:ACCODI FRAME=ETHERNET_SNAP NAME=E_SNAP
BIND IPX E_8022 NET=10
BIND IPX E_8023 NET=20
BIND IPX E_II NET=30
BIND IPX E_SNAP NET=40
AUTOEXEC.NCF (two boards)
=========================
LOAD C:NBI
LOAD C:MSM
LOAD C:ETHERTSM
LOAD C:ACCODI PCI_SLOT=3 FRAME=ETHERNET_802.2 NAME=E_8022_1
LOAD C:ACCODI PCI_SLOT=3 FRAME=ETHERNET_802.3 NAME=E_8023_1
LOAD C:ACCODI PCI_SLOT=3 FRAME=ETHERNET_II NAME=E_II_1
LOAD C:ACCODI PCI_SLOT=3 FRAME=ETHERNET_SNAP NAME=E_SNAP_1
LOAD C:ACCODI PCI_SLOT=4 FRAME=ETHERNET_802.2 NAME=E_8022_2
LOAD C:ACCODI PCI_SLOT=4 FRAME=ETHERNET_802.3 NAME=E_8023_2
LOAD C:ACCODI PCI_SLOT=4 FRAME=ETHERNET_II NAME=E_II_2
LOAD C:ACCODI PCI_SLOT=4 FRAME=ETHERNET_SNAP NAME=E_SNAP_2
BIND IPX E_8022_1 NET=10
BIND IPX E_8023_1 NET=20
BIND IPX E_II_1 NET=30
BIND IPX E_SNAP_1 NET=40
BIND IPX E_8022_2 NET=50
BIND IPX E_8023_2 NET=60
BIND IPX E_II_2 NET=70
BIND IPX E_SNAP_2 NET=80
B.3 Driver Installation for NetWare Server 5.X
0. Copy the following files from the Driver Diskette to the
NetWare Server directory.
\NETWARE\SERVER\4.X\MSM.NLM
\NETWARE\SERVER\ETHERTSM.NLM
\NETWARE\SERVER\ACCODI.LAN
1. Change to NetWare Server directory (for example:
CD\NWSERVER )
2. Load the NetWare Server System by typing SERVER, then press <Enter>.
3. When the Server prompt appears, load the NetWare Server
Installation Utility. That is,
:LOAD NWCONFIG
4. Select "Driver options" from the "Installtion Options" menu, then
press <Enter>.
5. Select "Configure network drivers" from the "Driver Options" menu,
then press <Enter>.
6. Select "Select a driver" from the "Additional Driver Actions" menu,
then press <Enter>.
7. Press <Ins> to install a unlisted driver, then press <F3> to
specify a different path.
8. Insert Accton's EN1207D Series Driver Diskette in your PC's floppy
drive and specify the path "A:\landrv32".
9. Select "Accton EN1207D-TX PCI Fast Ethernet Driver" from the
"Select a driver to install:" menu, then press <Enter>.
10. If necessary, select "Select/Modify driver parameters and
protocols" from the "Board EN1207D_1 (Driver ACCODI) Actions" menu,
then press <Enter> to set up the driver parameters.
Otherwise, select "Save parameters and load driver", then press <Enter>.
11. Follow instructions to complete driver installation.
12. Sample AUTOEXEC.NCF for NetWare Server 5.X
AUTOEXEC.NCF (one board)
========================
LOAD C:ACCODI FRAME=ETHERNET_802.2 NAME=E_8022
LOAD C:ACCODI FRAME=ETHERNET_802.3 NAME=E_8023
LOAD C:ACCODI FRAME=ETHERNET_II NAME=E_II
LOAD C:ACCODI FRAME=ETHERNET_SNAP NAME=E_SNAP
BIND IPX E_8022 NET=10
BIND IPX E_8023 NET=20
BIND IPX E_II NET=30
BIND IPX E_SNAP NET=40
AUTOEXEC.NCF (two boards)
=========================
LOAD C:ACCODI PCI_SLOT=3 FRAME=ETHERNET_802.2 NAME=E_8022_1
LOAD C:ACCODI PCI_SLOT=3 FRAME=ETHERNET_802.3 NAME=E_8023_1
LOAD C:ACCODI PCI_SLOT=3 FRAME=ETHERNET_II NAME=E_II_1
LOAD C:ACCODI PCI_SLOT=3 FRAME=ETHERNET_SNAP NAME=E_SNAP_1
LOAD C:ACCODI PCI_SLOT=4 FRAME=ETHERNET_802.2 NAME=E_8022_2
LOAD C:ACCODI PCI_SLOT=4 FRAME=ETHERNET_802.3 NAME=E_8023_2
LOAD C:ACCODI PCI_SLOT=4 FRAME=ETHERNET_II NAME=E_II_2
LOAD C:ACCODI PCI_SLOT=4 FRAME=ETHERNET_SNAP NAME=E_SNAP_2
BIND IPX E_8022_1 NET=10
BIND IPX E_8023_1 NET=20
BIND IPX E_II_1 NET=30
BIND IPX E_SNAP_1 NET=40
BIND IPX E_8022_2 NET=50
BIND IPX E_8023_2 NET=60
BIND IPX E_II_2 NET=70
BIND IPX E_SNAP_2 NET=80
C. Driver Installation for DOS32
1. If you have finished installing the NetWare Client 32 for DOS,
all you have to do is modify STARTNET.BAT. Please see the
sample STARTNET.BAT beneath these installation instructions.
2. Run INSTALL.EXE from NetWare DOS 32 diskette 1 (or from NetWare
4.11 CD). When the product manual appears, mark the "NetWare
Client 32 for DOS" item, then press <Enter>.
3. Select the "OTHER DRIVERS" item from the "32-bit Network Board Drivers"
menu, then press <Enter>.
4. Insert Accton's EN1207D Series Driver Diskette into your floppy diskette
drive, then specify the driver path, like A:\LANDRV32 or B:
5. Select "Accton EN1207D Series PCI Fast Ethernet Driver", then press
<Enter>.
6. Refer to Content G. and set the correct driver parameters to
comply with your network environment, then press <F10> to continue.
7. Following screen instructions to complete Client32 for DOS software
installation.
8. Reboot your machine.
Sample STARTNET.BAT for DOS32.
==============================
SET NWLANGUAGE=ENGLISH
C:\NOVELL\CLIENT32\NIOS.EXE
LOAD C:\NOVELL\CLIENT32\LSLC32.NLM
LOAD C:\NOVELL\CLIENT32\CMSM.NLM
LOAD C:\NOVELL\CLIENT32\ETHERTSM.NLM
LOAD C:\NOVELL\CLIENT32\ACCODI.LAN FRAME=ETHERNET_802.2
LOAD C:\NOVELL\CLIENT32\ACCODI.LAN FRAME=ETHERNET_802.3
LOAD C:\NOVELL\CLIENT32\ACCODI.LAN FRAME=ETHERNET_II
LOAD C:\NOVELL\CLIENT32\ACCODI.LAN FRAME=ETHERNET_SNAP
LOAD C:\NOVELL\CLIENT32\IPX.NLM
LOAD C:\NOVELL\CLIENT32\CLIENT32.NLM
NOTICE!! C:\NOVELL is the directory where your Novell Client 32
files are located.
D. Driver Installation for Microsoft Windows 3.x
Please refer to Content CD., in step 2, mark "NetWare Client 32
for DOS" and "Client 32 for Windows", then follow step 3...8
to complete installation.
E. Driver Installation for Microsoft Windows 95
If you have installed the Microsoft Client in your Windows 95
system, you should remove the adapter object and NDIS3 driver
for the EN1207D series adapter from the Windows 95 system.
E.1 Client 32 Driver Installation on Windows 95
===========================================
1. Plug Accton's EN1207D series adapter into one of the Master PCI
slots of your PCI platform.
2. Turn the power ON, then boot from Windows 95.
3. Windows 95 will prompt with "PCI Ethernet Controller" in the
"New Hardware Found" dialog box.
4. Select "Driver from disk provided by hardware manufacturer"
from the "New Hardware Found" dialog box, then click the OK button.
5. Insert the Accton EN1207D Series Driver Diskette in your floppy
drive.
6. Enter the driver pathname A:\LANDRV32, then click the OK button
in the "Install from Disk" dialog box.
7. Follow the screen's prompt to insert the "NetWare Client 32 for
Windows 95" disk and click the OK button in the "Insert Disk"
dialog box.
8. Otherwise enter the full pathname for the "NetWare Client 32 for
Windows 95" installation files in the "Copying Files....." dialog
box, then click the OK button.
9. Follow the screen's prompt to insert the "Windows 95 CD-ROM"
and click the OK button in the "Insert Disk" dialog box.
10. Otherwise enter the full pathname of the "Windows 95 CD-ROM"
installation files in the "Copying Files..." dialog box,
then click the OK button.
11. Windows 95 will copy the driver (ACCODI.LAN) from A:\LANDRV32
to the C:\NOVELL\CLIENT32 directory and the EN1207D.INF file
from A:\LANDRV32 to the C:\WINDOWS\INF directory.
12. Remove the Accton EN1207D-TX Driver Diskette from your floppy drive.
13. Restart your computer to initialize the network function.
NOTICE!! C:\NOVELL is the directory where your Novell Client 32
files are located.
C:\WINDOWS is the directory where your Windows 95 O.S.
is located.
F. Parameter Description for ACCODI.LAN
The following parameters are used in ACCODI.LAN.
1. SLOT : specifies which adapter is enabled when multiple EN1207D
adapters are found in your computer. The SLOT keyword is an
index value corresponding to PCI BIOS. The mapping from SLOT
to the physical PCI slot is different from one machine to
another.
Ex: LOAD ACCODI SLOT=3 FRAME=ETHERNET_802.2
LOAD ACCODI SLOT=4 FRAME=ETHERNET_II
2. FRAME : specifies which frame type is used by the driver. Accepted
values are Ethernet_802.2, Ethernet_802.3, Ethernet_II and
Ethernet_SNAP. Multiple frame types can be enabled by
loading the same driver with different FRAME types.
Ex: LOAD ACCODI FRAME=ETHERNET_802.2
LOAD ACCODI FRAME=ETHERNET_802.3
LOAD ACCODI FRAME=ETHERNET_II
LOAD ACCODI FRAME=ETHERNET_SNAP
3. NODE : Uses a different address to replace the node address burned
in EEPROM.
Ex: LOAD ACCODI NODE=0000E8001122
4. Medium : Specifies which medium type is used by the driver.
Accepted vaules are AUTO,100FULL,100HALF,10FULL and
10HALF.
Ex: LOAD ACCODI SLOT=3 FRAME=ETHERNET_802.2 Medium=100FULL
---
All trademarks and brand names mentioned belong to their
respective owners.
-- End of File --
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.