======================================================================= Stealth 3D 2000 Series README.TXT ======================================================================= Release Notes ------------- This is v1.10 of the Stealth 3D 2000 Series Windows NT 3.51 driver set. Installation Notes ------------------ The Windows NT drivers contained on this CD-ROM cannot be installed directly from the CD-ROM. A batch file has been created to generate a driver diskette for installation. The batch file is located in \WINNT. After inserting a blank, formatted 3.5" floppy diskette into your diskette drive, run the batch file as follows: X:\WINNT\NTDISK X: A: Where X is the drive letter of your CD-ROM drive, and A is the drive letter of your 3.5" floppy diskette drive. Using a diskette label, label this floppy diskette "Stealth 3D 2000 Series Windows NT Driver Diskette". You must have Windows NT 3.51 installed with the Standard VGA driver (640x480x16) before you install the Diamond Stealth 3D 2000 Series NT drivers. If you are running a different graphics mode please re-configure for Standard VGA. If you are installing Windows NT 3.51 for the first time with the Stealth 3D 2000 Series graphics adapter, the Windows NT 3.51 installer will detect the Stealth 3D 2000 Series as an S3 compatible display adapter. When the Display Settings dialog appears, select Cancel. This will install the Standard VGA driver. Installation Instructions ------------------------- 1. Once you have confirmed that you are running in Standard VGA, place the Stealth 3D 2000 Series Windows NT Driver Diskette into the floppy drive. 2. Open the Windows NT Control Panel. 3. Select the Display icon. 4. Select Change Display Type. 5. Select Change. 6. Select Other. 7. Confirm that the Driver Diskette is in A: (or you can change the drive letter if the driver diskette is in another drive). 8. You will now be presented with a list of driver entries. Select: Stealth 3D 2000 Series 9. You will then be prompted to change your system configuration. Select Yes. 10. When prompted to install Current or New drivers, select the New option. 11. Confirm the source path. 12. You need to restart Windows NT 3.51 for the changes to take place. Note that the default resolution that installed is 640x480x8 60Hz. From this point on, you can change your resolution/color depth by using the Display Icon in the Control Panel. Select the "List All Modes" button. This will display all resolutions and refresh rates available. Please use the Test option so that you can confirm that the selected refresh rate and resolution is supported by your monitor. Features Added -------------- Increased acceleration. Problems Addressed ------------------ None. Known Limitations ----------------- None. Contacting DIAMOND ------------------ Diamond can be reached through a number of ways: Postal Service : Diamond Multimedia Systems, Inc. 2880 Junction Avenue San Jose, CA 95134 Voice (Main) : (408) 325-7000 Voice (TechSppt): (408) 325-7100 [M-F 6-7; Sat 8-4 Pacific] [plus 24hr automated help] FAX (Main) : (408) 325-7070 FAX (Support) : (408) 325-7171 BBS (to 14400) : (408) 325-7080 BBS (to 28800) : (408) 325-7175 CompuServe : GO DIAMOND America Online : Keyword DIAMOND MSN : GOTO DIAMONDONLINE WWW : http://www.diamondmm.com FTP : ftp.diamondmm.com All product names listed are trademarks or copyrights of their respective owners. ======================================================================= Diamond Multimedia Systems, Inc. (c) 1993-96 (408) 325-7000 All Rights Reserved =======================================================================Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.