1. Md41260Xp.zip Driver
  2. SPilot.ini File Contents

SPilot.ini Driver File Contents (Md41260Xp.zip)

 DOWNLOAD NOW
SPilot.ini Driver Update Utility 
[RunTime]
IniVersion=1023 		//INIª©¥», ¶·»PDRIVER Check¤@­P, µ{¦¡¤~¯à°õ¦æ.
FWVersion=1135			//Firmwareª©¥», ¶·»PDRIVER Check¤@­P, µ{¦¡¤~¯à°õ¦æ.
DriverVersion=1110		// Mini5623.dll version
SensorType=0 			// 0: NEC 8872 		1:TOSHIBA 2953
MotorType=0				// 0: 6219
;SampleRate=1 			// 1: Pixel-Rate 0:Line-Rate

GrayDefaultGamma=1.0
DefaultGamma=1.6
TADefaultGamma=1.6
Calibration_Forward_Step=200		//288
CheckLockOnce=1

[Debug]
Quota_Debug=1

ShadingFunction=0		// 0:readcurrent 1:scan
ShowMessageBox=0
Delay_For_PlugOff=150	// unit : ms
TA_Motor_Forward=0

StartX=2250
endX=2750
StartY=1400
EndX=1800

[PTA]
SearchPosOnce=0
CalibrationAlways=1
ExplosuretimeFactor=1.0

PTA_NoStaggerModePixelDarkOffset_R=0
PTA_NoStaggerModePixelDarkOffset_G=0
PTA_NoStaggerModePixelDarkOffset_B=0

PTA_StaggerModePixelDarkOffset_R=0
PTA_StaggerModePixelDarkOffset_G=0
PTA_StaggerModePixelDarkOffset_B=0

PTA_Scan600ModePixelDarkOffset_R=0
PTA_Scan600ModePixelDarkOffset_G=0
PTA_Scan600ModePixelDarkOffset_B=0

PTA_Preview_Shading_Factor_R=1000
PTA_Preview_Shading_Factor_G=1000
PTA_Preview_Shading_Factor_B=1000

PTA_NoStagger_Shading_Factor_R=1000
PTA_NoStagger_Shading_Factor_G=1000
PTA_NoStagger_Shading_Factor_B=1000

PTA_Stagger_Shading_Factor_R=1000
PTA_Stagger_Shading_Factor_G=1000
PTA_Stagger_Shading_Factor_B=1000

PTA_600_Shading_Factor_R=1000
PTA_600_Shading_Factor_G=1000
PTA_600_Shading_Factor_B=1000

PTAMaxGainAmpBit=4
PTAMaxOffsetAmpBit=4
PTABitAllocation=1	// (Gain/Offset) 0:8/8, 1:10/6, 2:12/4

PTA_Scan_Mode_Offset_R=88
PTA_Scan_Mode_Offset_G=68
PTA_Scan_Mode_Offset_B=107

[NTA]
SearchPosOnce=0
NTA_Gamma_Enable=1		// 1: Negative ta will implement gamma
ExplosuretimeFactor=1.0

NTA_NoStaggerModePixelDarkOffset_R=0
NTA_NoStaggerModePixelDarkOffset_G=0
NTA_NoStaggerModePixelDarkOffset_B=0

NTA_StaggerModePixelDarkOffset_R=0
NTA_StaggerModePixelDarkOffset_G=0
NTA_StaggerModePixelDarkOffset_B=0

NTA_Scan600ModePixelDarkOffset_R=0
NTA_Scan600ModePixelDarkOffset_G=0
NTA_Scan600ModePixelDarkOffset_B=0

NTA_Preview_Shading_Factor_R=1000
NTA_Preview_Shading_Factor_G=1000
NTA_Preview_Shading_Factor_B=1000

NTA_NoStagger_Shading_Factor_R=1000
NTA_NoStagger_Shading_Factor_G=1000
NTA_NoStagger_Shading_Factor_B=1000

NTA_Stagger_Shading_Factor_R=1000
NTA_Stagger_Shading_Factor_G=1000
NTA_Stagger_Shading_Factor_B=1000

NTA_600_Shading_Factor_R=1000
NTA_600_Shading_Factor_G=1000
NTA_600_Shading_Factor_B=1000

NTAMaxGainAmpBit=2
NTAMaxOffsetAmpBit=2
NTABitAllocation=0	// (Gain/Offset) 0:8/8, 1:10/6, 2:12/4

[FlatBed]
CalibrationAlways=1	// 1 : Each time calibration
ReCalibrationTime=600	// unit : second
Afe_Adjust=1
Shading_Adjust=1

//	only for Afe_Adjust== 0 
Default_Afe_Gain_R=75
Default_Afe_Gain_G=75
Default_Afe_Gain_B=75
Default_Afe_Offset_R=128
Default_Afe_Offset_G=128
Default_Afe_Offset_B=128

[DeviceID]
DeviceID0=VID_0461&PID_0392
DeviceID1=VID_0461&PID_037B

[LUT]
Gray_LUT=LutGray.plg

600_LUT=lut.plg
1200_LUT=lut.plg

PTA_600_LUT=lut_TA.plg
PTA_1200_LUT=lut_TA.plg

[Property]
Enable_Debug=0			// If release driver,this value should be 0		
Enable_ShowTickCount=0			// If release driver,this value should be 0
RGB_Line_Shift=24		// 1200_Platform : 24 , 2400_Platform : 16
COLOR_SEQUENCE=0
HIGH_BUFFER_SIZE=2048000		// Ring Buffer size
HIGH_BUFFER_NUM=12
MEDIUM_BUFFER_SIZE=2048000		// Ring Buffer size
MEDIUM_BUFFER_NUM=8
LOW_BUFFER_SIZE=2048000		// Ring Buffer size
LOW_BUFFER_NUM=4
Max_Diff_Of_Gain=4096
Max_Diff_Of_Dark=2048
TAWarmTime=45
FastWarmTime=40
NormalWarmTime=90
MoreWarmTime=20			//	if check the lamp is not stable,wait more warm time 
FirstStep=5			//	only for 2400 platrform
SecondStep=2			//	only for 2400 platrform
WarmTimeValue=180		//	for default gain(0x4B) and offset(0x80)	
TAReWarmupAgain=120		//	unit : sec
ReWarmupAgain=120		//	unit : sec
DiffValueAtCheckWarmUp=3
BWThreshold=170//160
TG_RCH=32
TG_GCH=32
TG_BCH=32
BackTrace_2400_Steps=128
GoHomeACCSteps=287

MaxGainAmpBit=3
MaxOffsetAmpBit=5
BitAllocation=2	// (Gain/Offset) 0:8/8, 1:10/6, 2:12/4

StaggerImageProcess=0		//	Enable the stagger image process

[Calib_Parm]
Calibration_Enable=1
LineGain_Enable=1
LineDark_Enable=1
PixelGain_Enable=1
PixelDark_Enable=1
CheckLock_Enable=1
Gamma_Enable=1

LineGainStableValue=230		// For dynamic check the linegain adjust
S3LimitedTime=10		// No matter dynamic afe gain adjust is stable,just go to the next step
DumpCalibData=1			// Default1:Enable  0:Disable write calibration data to ini file
DynamicDetectAfe=5		// 1: dynamic detect the afe is stable,then adjust afe register	
// 0: wait to the S3LimitedTime,then adjust afe register

TargetWhite_R=230		// Target Code for calculating R channel VGA Gain
TargetWhite_G=230		// Target Code for calculating G channel VGA Gain
TargetWhite_B=230		// Target Code for calculating B channel VGA Gain

TargetDark_R=8			// Target Code for calculating R channel DC Offset
TargetDark_G=8			// Target Code for calculating G channel DC Offset
TargetDark_B=8			// Target Code for calculating B channel DC Offset

TA_Explosure_TargetWhite_R=200	// Target white for explosure time adjust
TA_Explosure_TargetWhite_G=200	// Target white for explosure time adjust
TA_Explosure_TargetWhite_B=200	// Target white for explosure time adjust

TA_TargetWhite_R=230		// Target Code for calculating R channel VGA Gain
TA_TargetWhite_G=230		// Target Code for calculating G channel VGA Gain
TA_TargetWhite_B=230		// Target Code for calculating B channel VGA Gain

TA_TargetDark_R=8			// Target Code for calculating R channel DC Offset
TA_TargetDark_G=8			// Target Code for calculating G channel DC Offset
TA_TargetDark_B=8			// Target Code for calculating B channel DC Offset

PGAGain=1				// VGA Gain for AFE		Default:1: enable  0:disable(Using ini for Setting)
PGAGain[1]=75
PGAGain[2]=75
PGAGain[3]=75

DACOffset=1				// DC Offset for AFE	Default:1: enable  0:disable(Using ini for Setting)
DACOffset[1]=128
DACOffset[2]=128
DACOffset[3]=128

FilterFactor=0.9
CutPercent=0.1
RegionNum=2

LineGainRp=123	// Gain=1.3
LineGainGp=109	// Gain=1.2
LineGainBp=208	// Gain=2.8

NTALineGainFactor_R=0.6
NTALineGainFactor_G=1.1
NTALineGainFactor_B=2.2

LineOffsetRp=83		//48		//104	//109
LineOffsetGp=83	//144	//41	//78
LineOffsetBp=105	// 87		//100//55	//100

ExplosureTimeTp=28
NTAExplosureTimeFactor=4.0

[Shading_Parm]
ShadingOnce=0			// 1:enable ,only do pixel gain and offset at each mode first time, 0: disable always do pixel gain and offset				
PixelOffsetDPCM=0
PTAPixelOffsetDPCM=1
NTAPixelOffsetDPCM=1

WhiteShadingLines_FLB=60
WhiteDropBright_FLB=0
WhiteDropDark_FLB=30
DarkShadingLines_FLB=20
DarkDropBright_FLB=0
DarkDropDark_FLB=0

TopSkipLines=5
BottomSkipLines=15

WhiteShadingLines_TA=60
WhiteDropBright_TA=0
WhiteDropDark_TA=30
DarkShadingLines_TA=20
DarkDropBright_TA=0
DarkDropDark_TA=0

PreviewModePixelDarkOffset_R=0
PreviewModePixelDarkOffset_G=0
PreviewModePixelDarkOffset_B=0

NoStaggerModePixelDarkOffset_R=-384
NoStaggerModePixelDarkOffset_G=-384
NoStaggerModePixelDarkOffset_B=-384

StaggerModePixelDarkOffset_R=-256	
StaggerModePixelDarkOffset_G=-256
StaggerModePixelDarkOffset_B=-256

Scan600ModePixelDarkOffset_R=-256
Scan600ModePixelDarkOffset_G=-256
Scan600ModePixelDarkOffset_B=-256

Preview_Shading_Factor_R=1000
Preview_Shading_Factor_G=1000
Preview_Shading_Factor_B=1000

NoStagger_Shading_Factor_R=1076
NoStagger_Shading_Factor_G=1080
NoStagger_Shading_Factor_B=1086

Stagger_Shading_Factor_R=1072
Stagger_Shading_Factor_G=1078
Stagger_Shading_Factor_B=1085

600_Shading_Factor_R=1000
600_Shading_Factor_G=1000
600_Shading_Factor_B=1000

Preview_Mode_Offset_R=91
Preview_Mode_Offset_G=73
Preview_Mode_Offset_B=91
Preview_Mode_Gain_R=150
Preview_Mode_Gain_G=104
Preview_Mode_Gain_B=143
Scan_NoStagger_Mode_Offset_R=108
Scan_NoStagger_Mode_Offset_G=98
Scan_NoStagger_Mode_Offset_B=109
Scan_NoStagger_Mode_Gain_R=217
Scan_NoStagger_Mode_Gain_G=194
Scan_NoStagger_Mode_Gain_B=215
Scan_Stagger_Mode_Offset_R=99
Scan_Stagger_Mode_Offset_G=83
Scan_Stagger_Mode_Offset_B=99
Scan_Stagger_Mode_Gain_R=155
Scan_Stagger_Mode_Gain_G=124
Scan_Stagger_Mode_Gain_B=162


[StartPos_Parm]
SearchOnce=1		// Default 0:Search Start Position Every Time 1: Search Once. 

X_Position=2389
Y_Position=6140

X_RealSet=172
Y_RealSet=716

PTA_X_RealSet=4762
PTA_Y_RealSet=8528

NTA_X_RealSet=4762
NTA_Y_RealSet=8528

Default_X=88	//140
Default_Y=512	//488

TA_Default_X=4758		//140
TA_Default_Y=6200	 //13800	//18000	//488

X_Offset=36	//16			//	(unit : 600 dpi)
Y_Offset=340	//320			//      (unit : half step)

PTA_X_Offset=52	//16			//	(unit : 600 dpi)
PTA_Y_Offset=2068	//320			//      (unit : half step)

NTA_X_Offset=52		//16			//	(unit : 600 dpi)
NTA_Y_Offset=2092	//320			//      (unit : half step)

TA_X_Range=1000
TA_Y_Range=1000

X_Range=10000
Y_Range=10000

[Image]
Software_Average=0


[PWM_Control]
PWM_Enable=0
DurationOn=100
DurationOff=100

[LOSSLESS]
LosslessEnable=0
LossLessValue=7 // Use Decimal format(Combine keep bit and encode bit value)
KeepBits=0
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

Copyright © 1996 - 2026 DriverGuide is an iCentric Corporation Company.    All rights reserved.
Privacy Policy
server: web2, load: 1.58