E1_USB.INI Driver File Contents (Md41260Xp.zip)

[Setting]
CalibrateOn=1
StartPos=-1
SpeedMode=-1
LeftLeading=-1
WarmupTime=45

[Files]
FileName_LUT1=lut1.tab
FileName_LUT2=lut.plg

[Calibrate]
DoLineDark=1
DoPixelDark=0
DoLineGain=1
DoPixelGain=1
DumpDarkGain=0

[G2E_600]
ExposureTime_Max=-1		// default 13800
ExposureTime_Min=-1		// default 2200
MotorSpeed=-1		// from 0 to 7, default 7
SkipSteps=100
MotorChange=-1		// Motor switch circuit , default 3000
HalforFull=-1		// delault 0 , 0:FULL 1:Half Step
ApplyLUT=1		// 1: use external lookup table
BW_Threshold=160		// delault 110
Calib_OneTime=0		// default 0
BackStep=-1		// default back 10 step
WaitCycle=-1		// default 3
StartPixel=-1
EndPixel=-1

[G2E_600_BT]
ExposureTime_Max=-1		// default 11400
ExposureTime_Min=-1		// default 1900
MotorSpeed=-1		// from 0 to 7, default 7
SkipSteps=100
MotorChange=-1		// Motor switch circuit , default 3000
HalforFull=-1		// delault 0 , 0:FULL 1:Half Step
ApplyLUT=1		// 1: use external lookup table
BW_Threshold=160		//delault 110
Calib_OneTime=1		//default 0
BackStep=-1		// default back 10 step
WaitCycle=-1		// default 3
StartPixel=-1
EndPixel=-1

[G2E_300]
ExposureTime_Max=-1		// default 5610
ExposureTime_Min=-1		// default 2000
MotorSpeed=-1		// from 0 to 7, default 2
SkipSteps=56
MotorChange=-1		// Motor switch circuit , default 3000
HalforFull=1		// delault 0 , 0:FULL 1:Half Step
ApplyLUT=1		// 1: use external lookup table
BW_Threshold=180		//delault 110
Calib_OneTime=0		//default 0
BackStep=-1		// default back 10 step
WaitCycle=-1		// default 3
StartPixel=-1
EndPixel=-1

[G2E_300_OVER]
ExposureTime_Max=-1		// default 5610
ExposureTime_Min=-1		// default 2000
MotorSpeed=-1		// from 0 to 7, default 2
SkipSteps=45
MotorChange=-1		// Motor switch circuit , default 3000
HalforFull=1		// delault 0 , 0:FULL 1:Half Step
ApplyLUT=1		// 1: use external lookup table
Gray200=1850
BW_Threshold=180		//delault 110
Calib_OneTime=1		//default 0
BackStep=-1		// default back 10 step
WaitCycle=-1		// default 3
StartPixel=-1
EndPixel=-1

[G3_600]
ExposureTime_Max=-1		// default 12000
ExposureTime_Min=-1		// default 2300
MotorSpeed=-1		// from 0 to 7, default 7
SkipSteps=-1
MotorChange=-1		// Motor switch circuit , default 5000
HalforFull=1		// delault 0 , 0:FULL 1:Half Step
ApplyLUT=1		// 1: use external lookup table
BW_Threshold=160		//delault 110
Calib_OneTime=0		//default 0
BackStep=-1		// default back 10 step
WaitCycle=-1		// default 3
StartPixel=-1
EndPixel=-1

[G3_300]
ExposureTime_Max=-1		// default 5610
ExposureTime_Min=-1		// default 2500
MotorSpeed=-1		// from 0 to 7, default 7
SkipSteps=-1
MotorChange=-1		// Motor switch circuit , default 5000
HalforFull=1		// delault 0 , 0:FULL 1:Half Step
ApplyLUT=1		// 1: use external lookup table
BW_Threshold=180		//delault 110
Calib_OneTime=0		//default 0
BackStep=-1		// default back 10 step
WaitCycle=-1		// default 3
StartPixel=-1
EndPixel=-1

[OT_8600]
ExposureTime_Max=5100//9500//13800 //22400
ExposureTime_Min=850//900//850//2750//2200//8800
MotorSpeed=-1		// from 0 to 7, default 7
SkipSteps=-1
MotorChange=-1		// Motor switch circuit
HalforFull=0		// delault 0 , 0:FULL 1:Half Step
ApplyLUT=1		// 1: use external lookup table
BW_Threshold=110	//delault 110
BackStep=-1		// default back 10 step
WaitCycle=-1		// default 3

; the following for QA & E.E. to testing noise
Forward_ScanSpeed=-1   // -1   -> 7   ,  0  <= range <= 7
Backward_ScanSpeed=-1    // -1   -> 7   ,  0  <= range <= 7
Home_ScanSpeed=-1    // -1   -> 7   ,  0  <= range <= 7
Silence=0    // 0 ->original  , 1 -> no forward,backward,vertical reference, startposition , 2 -> no backward
Pilot_Enable=0   // -1: s/w    0: user define
             
Pilot_Forward=60   // default 90
Pilot_Scan=100  // default 100StartPixel=6
EndPixel=12

[8100]
TPA_ExposureTime_Max=40000	// default 40000
ExposureTime_Max=11000		// default 11000
ExposureTime_Min=1375		// default 1375
HB_ExposureTime_Min=458		// default 458
SkipSteps=12
MotorChange=-1		// Motor switch circuit , default 3000
HB_MotorChange=-1	// Motor switch circuit , default 3000
HalforFull=0		// delault 0 , 0:FULL 1:Half Step
ApplyLUT=1		// 1: use external lookup table
BW_Threshold=180	// delault 180
BackStep=-1		// default back 10 step
WaitCycle=0		// default 3
StartPixel=-1
EndPixel=-1
Calib_OneTime=1		// 0:everytime , (delault)1:one time
CalibrateType=8

home_acc=-1		//0:no accleration 1:accleration(default)
back_acc=-1		//0:no accleration 1:accleration(default)
forward_acc=-1		//0:no accleration 1:accleration(default)

BackwardSpeed=-1	// default=1375
ForwardSpeed=-1		// default=1375
HomeSpeed=-1		// default=1375
HB_BackwardSpeed=-1	// default=900
HB_ForwardSpeed=-1	// default=800
HB_HomeSpeed=-1		// default=687

[G6_600]
TPA_ExposureTime_Max=40000	// default 40000
ExposureTime_Max=11400		// default 11400
ExposureTime_Min=1570		// default 1570
HB_ExposureTime_Min=458		// default 458
SkipSteps=30
MotorChange=-1		// Motor switch circuit , default 3000
HB_MotorChange=-1	// Motor switch circuit , default 3000
HalforFull=0		// delault 0 , 0:FULL 1:Half Step
ApplyLUT=1		// 1: use external lookup table
BW_Threshold=160	// delault 180
BackStep_EPP=-1		// default back 10 step
BackStep_USB=-1		// default back 16 step
WaitCycle=0		// default 3
StartPixel=-1
EndPixel=-1
Calib_OneTime=1		// 0:everytime , (delault)1:one time
CalibrateType=1

home_acc=-1		//0:no accleration 1:accleration(default)
back_acc=-1		//0:no accleration 1:accleration(default)
forward_acc=-1		//0:no accleration 1:accleration(default)

BackwardSpeed=-1	// default=1900
ForwardSpeed=-1		// default=1900
HomeSpeed=-1		// default=1900
HB_BackwardSpeed=-1	// default=900
HB_ForwardSpeed=-1	// default=800
HB_HomeSpeed=-1		// default=687


[Runtime]
Pga_TargetCode_Red=-1
Pga_TargetCode_Green=-1
Pga_TargetCode_Blue=-1
TargetDark_Red=2
TargetDark_Green=2
TargetDark_Blue=2

Dark_Red  =-1		// init Dark Value
Dark_Green=-1
Dark_Blue =-1


Max_Times=-1
USB_DELAYTIME=2
USBOemName0=0x7512
GenerateLUT=0
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web1, load: 1.22