1. netet.zip Driver
2. README.TXT File Contents

README.TXT Driver File Contents (netet.zip)

digicorp Communication Equipment Ltd.     Readme.txt

Driver Version 1.0

             Local Area Network Software Driver Support
             for PMX PCMCIA ethernet adapter


    < I > To configure this adapter and install software, please type:

          INSTALL <Enter>

          and follow the on-screen instructions.


    For more information, see your Installation Manual.

    < II > Software Installation Advisory

          1. For those who installed EMM386.EXE in your CONFIG.SYS, please
             exclude memory address D000-D7FF from your system. Ethernet
             PCMCIA Card will use this space to read Ethernet ID and other
             information from the on-board flash ROM.

                Example : DEVICE=EMM386.EXE NOEMS X=D000-D7FF

           2. For those who installed Card and Socket Services device drivers
              in your CONFIG.SYS, please run NETOPEN.EXE after those device
              drivers since NETOPEN.EXE is a Card Services Client and should 
              only be  activated after the Card and Socket Services drivers 
              are activated.

                Example 1:(DataBook CardTalk)
                DEVICE=C:\CARDTALK\SS_2.SYS (Socket Service driver)
                DEVICE=C:\CARDTALK\CTALKCS.EXE (Card Service driver)
                DEVICE=C:\CARDTALK\CARDTALK.SYS (Super Client driver)
                DEVICE=C:\NETWORK\NETOPEN.EXE /PORT=300 /INT=5

                Example 2:(SystemSoft CardSoft)
                DEVICE=C:\CARDSOFT\SS365SL.EXE (Socket Service driver)
                DEVICE=C:\CARDSOFT\CS.EXE (Card Service driver)
                DEVICE=C:\CARDSOFT\CSALLOC.EXE C:\CARDSOFT\CSALLOC.INI
                DEVICE=C:\CARDSOFT\CARDID.EXE
                DEVICE=C:\NETWORK\NETOPEN.EXE /PORT=300 /INT=5

                Example 3:(Phoenix PCMPlus)
                DEVICE=C:\PCM3\CNFIGNAM.EXE /DEFAULT
                DEVICE=C:\PCM3\PCMSS.EXE (Socket Services driver)
                DEVICE=C:\PCM3\PCMCS.EXE (Card Service driver)
                DEVICE=C:\PCM3\PCMRMAN.EXE
                DEVICE=C:\PCM3\PCMSCD.EXE
                DEVICE=C:\NETWORK\NETOPEN.EXE /PORT=300 /INT=5


    < III > For the PMX card work properly, please follow the
            instructions below :

          1. Determine which Network OS the machine used.

          2. Read the user's manual in the driver disk and modify some of

             system information files, such as "AUTOEXEC.BAT", "CONFIG.SYS",

             "PROTOCOL.INI", if necessary.

          3. copy the proper network driver(s) from driver disk to the desired

             directory.

digicorp Technical Support

If you have any problems, you can contact us in the following ways:
Tel: +44 (0)1372 844151
e-mail: support@digicorp.co.uk

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.