1. v90wiz.zip Driver
2. README.TXT File Contents

README.TXT Driver File Contents (v90wiz.zip)

Dear customer,
----------------------------------------------------------------------------
(A)  V90 Update Wizard 

	** This Wizard is not suit for modem with firmware V0.519D . 
	** If your firmware version is V0.519D . Please update to V1.120 or
	** V2.012 by FlashCom Utility first. The latest firmware can be 
	** download from Web site: www.hightech.com.hk
     
      The Wizard queries the modem and, depending upon the result, presents 
the user with various load options and then flash-loads the modem’s firmware.
Its primary goal is to handle the transition period during which ISPs are 
updating their modems to the ITU V.90 specification.  It loads the modem with
 a "transitional" firmware that tracks the V.90 status of the most recent 
connection made my the modem.  When the wizard runs subsequently, it queries 
the modem and tells the user whether or not to load the final V.90 firmware.
The Wizard also provides the ability to backup the modem’s existing firmware 
to a disk file and the means to restore that firmware should the need arise.

	To install the V90 Update Wizard: 
	
	Run the A:\V90.bat file.

OR 	Copy all the file under a:\V90WIZ directory into your hard disk 
	and then run "V90wiz.exe" file
	(1)C:\> MD C:\V90WIZ
	(2)C:\> COPY A:\V90WIZ\*.* C:\V90WIZ
	(3)C:\> CD\V90WIZ
	(4)C:\> V90WIZ.exe
	
------------------------------------------------------------------------------
(B)  Plug & Play Utility (Optional for Plug & Play Modem)

      The SETMODEM program is provided to allow your 56Kbps Plug and Play
modems to be configured on PCs which have not been configured to support Plug 
and Play. PCs that have Windows 95 do not need the SETMODEM program since
Windows 95 supports Plug and Play. 

SETMODEM is a DOS utility and will:
1) look for an ISA Plug and Play modem with a valid Vendor ID
2) find an available COM port
3) display the recommended COM port and allow the user to either agree
   with the recommended COM port or to select a different COM port 
   (COM can have an IRQ of 3/4/5/7 and I/O base of 3F8/2F8/3E8/2E8/100/
    108/240)
4) exit the program after configuring the Plug and Play modem 
5) before exiting, write a batch file line in autoexec.bat so that the 
   Plug and play modem will automatically be configured on the next power
   up 
6) Run INSTALL.EXE for the first time installation of SETMODEM utility.

Note: This utility will not recommend COM1-4 even if available if Cardmanager
PCMCIA software is installed on the system. If Cardmanager is disabled 
(comment out the proper lines in config.sys), then COM1-4 will be recommended
if available.
------------------------------------------------------------------------------
(C)   Windows 95 Modem Driver File

      The Win95drv.inf file is a driver file for Windows 95. This file is used
for modem installation in Windows 95. In Windows 95, the PnP modem will be
found automatically. Then Windows 95 will query you for the driver used by this
modem. Insert your driver diskette and select the suitable modem type.

      If your modem does not support Plug & Play mode, do the following steps:
      (1)       Make sure the commport of the modem does not conflict with
                other hardware in your PC system.
      (2)       Boot up the Windows 95 and click the Modem icon inside the
                Control Panel to install your modem.
      (3)       Click "Next" to run the "Add New Hardware Wizard". Then
                Windows 95 will look for your new hardware.
      (4)       After the "detection Progress" finish, Windows 95 will find
                your new communication port.
      (5)       Then click "Finish" bar to continue install the modem.
      (6)       Click "Next" bar in the "Install New Modem" display to let
                Windows 95 to scan your modem type.
      (7)       Insert the driver diskette and click the "Have Disk" bar to
                select the correct modem type.
      (8)       Now, you can install the bundle software to optimize your
                modem features.

      ********* Select the correct type for your modem card.
                (select "SpeedCom" 's model)

      ********* The best way to do the installation or to fine tune the
                commports and modem settings, please refer to your User Guide
                of Windows 95.
-------------------------------------------------------------------------------

(D)   Windows 95 Serial Wave Driver File

      The Ser_wave.inf file is a Serial Wave driver file for windows 95. If your
Windows 95 has been installed the "Unimodem V" function. Then this file will be
required by Windows 95 after you installed the modem driver Win95drv.inf .
Unimodem V is a special function for Windows 95.For detail informations, Please
contact Microsoft.